Oil change in automatic transmission (partial) - Toyota Corolla, 1.5 liter, 2003
In the photo - filter, gasket, oil, view of the box with the pan removed.
Procedure
1. Draining the automatic transmission oil through the plug.
2. Removing the box pan
3. Removing the filter
4. Installing the filter (with oil poured into it)
5. Cleaning the pan and magnets on it
6. Installing the pan
7. Filling oil through the inspection neck
8. Gasping the engine
Even when changing the oil in the box, it is recommended to turn the conjured for a short time, BUT IN NO EVENT DO NOT START THE CAR. This is so that the oil that remains in the inside of the box flows out.
There are 2 types of replacement: full and partial.
Partial - when the cork is unscrewed and drained as much as it will merge (about 3.5 l)
Full - they are washed with oil until the clean one comes out (about 9 l).
PySy after full boxes are sometimes covered)