3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First

Injector and throttle cleaning, spark plug replacement — logbook Toyota Camry 2000

        Toyota Camry 22 2000

Not long ago I decided to change the spark plugs and clean the throttle injector for one thing, it was not in vain that I decided to do this, because in the course of all the work I saw what condition they were in! Dirt darkness! We go further, when they began to remove the pipe from the throttle, they somehow tore it. I guess from old age it became not rubber, but plastic))) I went to the store, I thought there would be no problems with this. Wrong! the branch pipe is not sold separately, only the whole air system (the branch pipe and the receiver) had to be paid 3 tr.
In the summer of 2010 changed the radiator. It came without a fan start sensor. began to unscrew from the old one, broke off the contacts on it. I had to solder wires directly to it.
In short, I also bought a fan start sensor.

214 Comments
Sort by:
f
fabio21065 22.02.22

ahh, I remember, in the summer you always turned the fan

B
BOING101 22.02.22

Dorov! but I didn’t write about cleaning the injector, I look at mine they are somewhere very far away)) is it really necessary to pull off the valve? Although pulling it off is not a problem, but then how ?! And there was a difference in engine performance and fuel consumption ?!

B
BOING101 22.02.22

thanks! I will look for dudes with garbage! ))))

a
anabolik1991 22.02.22

Great! The injector is cleaned in this way: Remove the back seat, climb to the gas tank, remove the gasoline hose that fits the fuel pump and connect some garbage to it where the cleaner is poured, this cleaner is under pressure, there it is somewhere around 1.5 liters, maybe a little less, start engine and it works on this cleaner, thereby cleaning the injector! In the process, while the engine is running, thick white smoke comes out of the pipe! After the procedure ends, they are transferred to gasoline, respectively! They immediately warn that within two or so days the engine will not work stably, the idle speed is floating, and they are slightly overestimated! Gasoline for two days also eats a little more! The difference is felt machine becomes faster! So to speak, the necessary procedure!