Debriefing
In General, scattered 2,8 — head good cylinder head gasket is not stuck, the pistons 2 repairs)
Farmers hi) motor fingered clumsy hands, the 3 bolts from the struts of the block lay in the pan, bolt the knee by hand with little effort, as the oil pump do not loosen God knows)) there's a lot of Hermetica etc. Well, the main farm look)
even the owner said that they changed hijiki new — Nunu, it would be better not changed on this)))
right original
Yes, the damper timing chain is very expensive and generally don't find him. No wires, nothing )))
Alco2002
but where to look? it's in the trash go, I have giltay
Room 7 digits on the block
I don't need it, I bought the motor for head Pro stock and experiences. he gilzean and sleeve are all rusty.
About gidikov of course, was the same situation after changing the oil chattered Godric, thought to be held then opened and afigel also different, I had to change the camshaft and set hitrikov. But with block You do not understand, You say that to the dump, but that just be a bad unit?
but not to the same extent that would have filled rather put candles without rings, to reduce the combustion chamber, in other words the idiots on the brain they squeal these pistons
Dyrokol
and what is the piston molatelo? c-a.d-cd.net/69cadcas-960.jpg
The piston unit is inserted than a metal it pounded
romansson
Yes. Alas, but for half the repairmen "torque wrench" — a curse(
Nah usually say, pfff Petrovich over knob and tube pulls and everything is fine, or I point know, experience 100500лет)
well the studs are not broke that are attached to the bed, covered it lightly at all...
Dunoon...my mileage was 350тыс and it is like new and pomonal to wzbogacania of the soul...eyes cut this crap...wow
Turecka)) Shoe not justified roads and put on a wire with hermetism and under the seal of the head)
lifters for our engines does not happen. and they need adjustment if that. so without shims, they do not happen. in the photo the usual gidrik for $ 100. for example a good substitute 500 p\EA.