New Year's gift - Toyota Corolla, 1.5 liter, 1999
I decided to treat myself and the machine to a good sound. I bought Hertz DSK 130 two-component speakers .
Size, mm
Woofer DV 130 - 130mm
Tweeter DT 16 - 15mm
Power (peak), 120W
Power (continuous), 60W
Impedance, 4Ω
Frequency response, 60-21kHz
Sensitivity, 91dB
Outer diameter, 130mm
There is experience of using this acoustic system - the quality is at a very decent level. Haven't installed yet. I feel that I will have to cut the adapter rings. Now the car has factory speakers.
Installation and live photos will be later, maybe.
By the way, there are factory holes in the doors for sixteen-centimeter acoustics (!) BUT then you will have to look for flat acoustics. Otherwise, it will rest against the glass inside and strongly bulge outside.
Adapter rings made of 15mm plywood turned out to be of the following sizes:
The red dots are the attachment points to the body, the yellow dots are the column attachment to the spacer.
UPD from 12/31/2010
A friend fitted a 4-channel Supra SBD A4120 amplifier.
There are few reviews about it on the Internet. Supra is a budget brand… should we expect good sound from it?..
And the question is: why do you need six stripes? Isn't it easier to take a six-channel VCL?)))
Four speakers will go to the speakers, and two to the buffer ...
If you take a four-way one, you won’t be able to drive over your head behind a subwoofer, even to say so, you can drive, but on six-way it’s more convenient and better ...
I have friends who connected like that, ran into the trunk and there they removed the basses, but twisted it at six and everything is fine.
Six lane purely for convenience…
Here's what I think: in order for the audio system to be controlled completely from the head unit, then it is necessary to have 6 line outputs on the head (4 for the speakers through the VCL and 2 for the subwoofer). If you buy a 6-channel and connect it to one line on your head, then when setting it up, you get a lot of hemorrhoids (twisted it in the trunk, ran and listened to the salon, returned, twisted it again and so on in a circle). plus the inability to adjust the sound in real time to specific music. Here, it's like this...
Ivanovnvkz
And how many bands do you want, I want six bands, four for the column, and two for the buffer.
I'm specifically looking for one...
And the question is: why do you need six stripes? Isn't it easier to take a six-channel VCL?)))
Yes, of course, it would be nice to hang a capacitor on the power supply. Still ahead! =) Happy New Year! =)))
Well, of course, to do everything with special wires and in general it will be fine ...
And also take the condensate (if I'm not mistaken in the name) and then the sub and in general it will be buzzing ...
Yes, yes, just like that, 4 rulers for the amp to the speakers. and a couple on sub. It will only be necessary to redo the wiring for the whole thing in a competent way ...
And how many bands do you want, I want six bands, four for the column, and two for the buffer.
I'm specifically looking for one...
Budget price range of 7-9 thousand. Specifically, the models have not yet been determined, but for this amount you can already find
While Kenwood. I hope to take the Alps in a couple of months. Better than Alpine, I have not seen anything yet.
So it's hard to answer. Someday in the near future I'll look at the installation depth on the box
how many centimeters high does the column in the door have to fit in?
I also want to change the factory
I had this too, and then shifting the box once again, I decided that I should do it on the weekend!