Dashboard light - Toyota Camry, 2.2L, 1997

oga)))

buzz

of course, you just change the bulbs and that's it

How is she easily removable there?

yes, not at all)

THX

WHERE TO FIND THE SALON CLIPS OR REPLACE THEM

yes, it's easy, you unscrew 4 like a bolt and then the tidy itself

AND HOW TO GET THERE. UNDER THE PANEL

yes, well, nafig in your ECB, I love all kinds of clips, in all auto shops there are

asked everywhere, only to order ...

you probably have in any store where paint varnishes)) we have so

WHERE TO FIND THE SALON CLIPS OR REPLACE THEM

I haven’t had a Toyota for 5 years already)))) How do I know the marking) Let's go to the market, took off our bulbs, went to prop up similar diodes like this and did it) And right now, you can make it easier, buy a diode tape and make it backlight)

write the marking of diodes Pliz panel!

you need to go to the diagnostics and so that the master would sit down and ride or you take off to understand what is buzzing

PROBABLY I WILL DO SO. IF SUDDENLY THERE IS AN ASSUMPTION. VIBRATION IN THE FRONT OF THE AUTO WHEN SPEEDING UP… GAS VIBRATION. CLUTCH-SILENCE. ON 90 DECIDES. BEFORE AND AFTER NOISE LIKE IN A TRACTOR ...

19ANDREW74

CHANGED ALL CUSHIONS, CLUTCH DISC (ASSEMBLY) VIBRATION THEN APPEARS THAT WILL DISAPPEAR, ESPECIALLY AT 70-80 KM. THERE IS ANOTHER FRAME MOUNTING TO THE BODY, THE ENGINE IS ATTACHED TO THIS FRAME ... IN GENERAL I DON'T KNOW WHAT TO DO ... AND I WAS RIDING WITH THE MASTER AND NOT WITH ONE, EVERYONE SAYS DIFFERENT, IN CONSEQUENCE OF WHAT WHAT TO DO. BY THE WAY, THE OLD CLUTCH DISC WAS CHECKED ON THE TOP EDGES, AND THE MIDDLE IS A WHOLE ... QUESTION, WHAT THE FUCK ...

feel the armor of the wire exactly the same situation was also everything was replaced and it turned out to be two candles and two armored wires)))

uuu xs finally didn’t come across such ...

CHANGED ALL CUSHIONS, CLUTCH DISC (ASSEMBLY) VIBRATION THEN APPEARS THAT WILL DISAPPEAR, ESPECIALLY AT 70-80 KM. THERE IS ANOTHER FRAME MOUNTING TO THE BODY, THE ENGINE IS ATTACHED TO THIS FRAME ... IN GENERAL I DON'T KNOW WHAT TO DO ... AND I WAS RIDING WITH THE MASTER AND NOT WITH ONE, EVERYONE SAYS DIFFERENT, IN CONSEQUENCE OF WHAT WHAT TO DO. BY THE WAY, THE OLD CLUTCH DISC WAS CHECKED ON THE TOP EDGES, AND THE MIDDLE IS A WHOLE ... QUESTION, WHAT THE FUCK ...

yes, there are similar bulbs all over the panel, it is better to take off the tidy and go buy it. Or make a ribbon

HOW THE LAMPS ARE CALLED ILLUMINATION OF INSTRUMENTS (LAMP BRAND) AND THE CIRCUITS ARE THE SAME IN THE ENTIRE PANEL.