Alteration of headlights. The end! - Toyota Will VS, 1.8 L, 2001

Well, congratulations! :) As you set it up, come and brag;)
PS Return the tool :)))))

I'll figure it out with the engine and I'll start doing farks too)

Not at all. so even mine is safer than closing it there =)
slowly, evenly warmed up =)

it means that my dukhofffka is not so hot, I shoved it and nafig changed my mind)

The fact is that the headlight does not fit into the oven (I have a small oven, or a large headlight)
Therefore, I put the oven at 230-250 degrees, let it warm up, then opened and put a piece of wood on the metal sheet, having unscrewed all available metal parts in advance and removing all the plugs put the headlamp in the oven… 3 minutes, turned it in a different direction, took it out for another 3 minutes and started stretching it starting from the corner! WARNING! on the headlight itself, in addition to self-tapping screws and a silicone, there are also latches, it is advisable to open them in advance too ...

When you stretch the headlamp, it is better to have a couple of hands with unnecessary pressure or a screwdriver to tear the Selikon ... it quickly cools down and becomes wooden! ..

like this, in a few runs my friend and I managed it =)

tell me how you pasted this miracle, it is you and not as it is written in other sites)

I have lensed optics ... there I just swap the curtains ... but how to act on non-linzovanny optics ... I don’t know I will not tell = (

How did you manage to make the headlights? Prompt tea, too, I am right-handed today!

Lenses can be installed on non-lensed optics. And even better - entrust this business to professionals, for example: bihalogen.ru