Cleaning the XX sensor and replacing the clutch line - Toyota Corolla Levin, 1.6 liter, 2000

Often on the forum questions about XX pop up, well, here's the easiest way to clean it.

Since it is in a very asshole place, in order to remove it, you need to disassemble the entire intake-remove the throttle, but we will go the other way (Joni's idea is evgs ). Disassemble the intake, remove all the tubes that interfere in the area. Then you pull off two thick tubes, one is inserted into the receiver, the second goes to the "ventilation" of the fuel rail. take a bottle of a thread of a good carb cleaner, spray it into the upper nozzle, and at the same time intermittently supply power to the XX sensor (2 right contacts)

At this moment, the sensor closes/opens the shutter... the whole balloon is sprayed out and everything is ready, the brain will go crazy for a while)) but then it will set the correct speed for you and EVERYTHING!

Well, at the same time I changed the hose of the clutch line to a reinforced one, so the thing is useless, but since I got it on occasion for only 500 rubles, it won’t be worse))

And as usual - not diarrhea so scrofula)
On the way home, something happened to the box or the clutch, the sounds are terrible, dragged the car to the service on a rope, today they will throw off the box later I will unsubscribe that I broke it.