Now xenon is even bigger))))) - Toyota Corolla, 1.6 liter, 2007

Duck it shines white! It's cool to turn on when someone blinds, the effect will immediately be!

I like it more, more symmetrical, tumanka performs the same functions and remained in the same place, only a glass of white is now))))

Why did you change it to white? Where did you move the fog light?

Atas27

Night. You stand on the track, you decide to back up a little. You cut in the back. You can see everything. The grandfather walking forward frankly does not understand why something is on his side to meet him. His reaction?

If it were possible to put brighter lights, believe me, manufacturers would have done this long ago.

In Moscow, it is still clear on the Moscow Ring Road, you can go backwards! And in mono cities then ?! At least stick it in the turn signals!

I don't go backwards on the highway)))))

Night. You stand on the track, you decide to back up a little. You cut in the back. You can see everything. The grandfather walking forward frankly does not understand why something is on his side to meet him. His reaction?

If it were possible to put brighter lights, believe me, manufacturers would have done this long ago.

like the same)))))

All ATP)) did it last night)) By the way, it seems to me, or is the left one bigger than the right one?

take off the flashlight and unscrew one self-tapping screw from the reflector mount and start to pick it out (reflector)

Any more tips? )) so in advance. and in general, how did you disassemble it?

just better, she hardly understands

Super). I have long wanted to make a white one but I thought I would have to change). Thanks today I will try to remove the filter).

Smak

Did you order a headlamp separately?) Well, instead of fog lights, right?)
Or somehow replaced the red glass))

the headlight is the same, I did not order anything)))) I disassembled my own, there is a red light filter inside, I removed it.

you are almost right, everything is so, only I did not cut anything)))))

As far as I know in such things, the headlight is standard, you just need to cut it there. and glue ...

Did you order a headlamp separately?) Well, instead of fog lights, right?)
Or somehow replaced the red glass))

For atas27. Another situation can be imagined! Night. ... You stand anywhere and decide to back up! You can see everything and suddenly a man, an animal, runs out of nowhere. ... ... Etc. ... ... You press the brake and no one is hurt!
As an option did not consider?
And it is forbidden to drive in reverse on the track!

accuracy is the key to success))))) try to pick up something with a plastic or wooden one, so that it doesn't scratch so much, although everything worked out for me, you need to be bolder

Hello!
Today I wanted to make the left lantern white, like yours, nothing came of it: (((
I took it off, unscrewed the screw, but then ... you write you need to pick it out ... how and with what? Can you give any recommendations?
Thank you!

Clear! Eh ... Boom to try!

I don’t know how anyone, but I’m very good. tried hard and did not break anything). worked with an awl, and a screwdriver)

great it turned out! Father needs to make out, otherwise I don't like this asymmetry =)

Cool, I will definitely do it myself!

well done, but I did not melt anything, it happened

just did it myself!
reflector well, I did not want to lick it! melted with a soldering iron and everything worked out)
for those who are not sure it is better not to climb!

I think you can buy it.

tell me where to get a transparent diffuser

you can still heat up and separate the glass from the case, but I did not draw.

I looked at the headlamp and I don't understand how you can do something carefully there, I'll look again later

I don’t really like them

Thinking about replacing reflectors with LED lights?

put yourself check it out)))))

why, it seems to me it will be good. especially if you connect them to the rear fog lights.

yes, even it is very expensive, I would say, there the cost price of 500 rubles from the strength seems to me, I can think of bungling myself to try

yes, I think. costs a little 4500.

I found www.autocommunity.ru/forum/toyota/handmade/t29411/

I also thought to order reflectors and buy bulbs and put them there. just need to read somewhere how to solder it all

I think that it will work out to find some kind of information, although suddenly try to get lucky, you can just try to do it, it seems like it shouldn't turn out very expensive

hint number one: far-off view)))

Nuka tell me :-D

I think it's worth making even more xenon)) I know one place in front))))

They brought me today the rear left lamp from the right-handed Corolla immediately with reverse gear. Issue price 1500 rubles. And I will make foglights out of reflectors. I’ll just go through the inspection ... And immediately ...

i863.photobucket.com/albu...DSCF3590.jpg?t=1270744689

everything was closed for me, I do
n’t remember, I picked it up in place

Guys, a question for those who simply removed the red reflector and put the xenon in reverse. The seats for lamps (socles) are also different there. On the right, H1 is clear, but on the left who installed it? And did the little black lids not close?

as far as I know now there is xenon right under such a base as in the
reverse gear normally and not only this, if you order it makes sense to look, you will have to farm less

I just wanted to order from ebay. It is impossible to pick up the place. Can someone clarify if the base is exactly H1? :)

I would like to know what kind of base there is in reverse ...)))

A baseless lamp is written according to the manual.