Radiator grille upgrade! — Toyota Carina E, 2.0 liter, 1994

In general, I'll start with the fact that I had the usual Karinovsky lattice.

Well, I decided to do something with it, or rather refresh it))) I thought for a long time, and in the end I decided to insert a grid there!
I started by going to the store and buying a net. Then he began to redo the old one, or rather had to cut out the entire middle.

The photo shows that there are holes in the tanks. We close them with glass fiber with glass cloth, then we grind and level them. Then we begin to attach the grid. Approximately cut out the contour of the frame and try to insert it by bending the edges along the frame and cutting where it does not fit. After when the mesh is ready, we also fix it with glass fiber, and not immediately around the entire perimeter, but gradually first up and down, well, or vice versa, whatever you like))) If you start pouring all at once, then which part will gradually move away, t .to. the mesh is a bit bent! After everything is dry, we begin to prepare for painting, and, accordingly, paint! And here's what we get