Nishtyaki))) — Toyota Aristo, 3.0 liter, 1994
I did not want to show you this before installation, but still I could not stand it and decided! )) It will not be in my style, few letters and many photos)))
So, I present to your attention nishtyaki for the second stage of the Vkhlop — Exhaust program! ))
Now let's take a closer look, one by one.
The Kakimoto Racing exhaust from the Supra JZA80 is quite a bit used ))
Yes, yes, it's true Kakimoto Racing)))) I'll be a bastard))))
This is so that you can estimate the size of the terminal jar
Bank outlet 112 millimeters)))
Collector GODRacing arrived from America, quite tolerable quality, has a 3 + 3 configuration. With gaskets, studs and other necessary little things
The turbine is not installed straight but at a slight angle to facilitate the installation of a large diameter air filter
Sanded and ready to install.
I hope it will be better in terms of the quality of my old collector, which bursts from overheating with enviable regularity))
Here it is already carefully wrapped with thermal tape)
Frontpipe 76mm flown from America, replica of HKS frontpipe, great quality
Downpipe 76mm arrived from America, an improved copy of HKS, a flexible insert was added to dampen vibrations, excellent quality
Whale for filing - draining oil into the turbine, my old one is already tired. ))))
Gaskets, bolts and scarce V-Band collar))
Wastegate OBXRacing arrived from America, made in USA, I have already managed to disassemble and assemble it to install the desired spring, and I will say that it is very different in workmanship from my old Chinese one for the better, I think it will work properly for several years, unlike Chinese who began to wedge in half a year. Includes flanges, gaskets, and 3 springs 0.6, 0.9, 1.1
Two skeins of thermal tape 10 meters each, flew in from America, held it over the stove - it glows red but does not smolder, the maximum temperature declared by the manufacturer is 1200 degrees Celsius)) Black, paints hands wonderfully)) And then hands paint everything they touch (T-shirt, wallpaper , towel)) Most of it went to the collector winding))
Well, something like that)) I'm waiting for your comments on this matter and wishes of good luck in the installation on the Sofa, because nifiga is not Bolt - on the set turned out))
Yours sincerely: Chameleon)
nishtyaki nishtyaki))))) he will generally take off with them))))) we will change our brains and like a dun)))))
Everything from America, except for the exhaust, I bought the exhaust in Alma-Ata through the Toyota club))
Cool ... but where did you get such beauty?
We are waiting for the report after installation)) Good luck!
hmm. it's the last one then. first technically put the car in order) and I will exhaust the video on injapan for 200 bucks))
Well, if you drag it from inJapan, then I think somewhere around $ 400 - $ 500 will rise)
Oh-tyzh Yozhy-y-yk! What a cool girl came, the shaitan-carba is being built, however, f_O
But don’t worry) If it’s written in his family to grunt, he will grunt) Do anything at all)
This cools the bearing, it has nothing to do with the body of the hot part) But it burst due to a casting defect. Your engine will dry out earlier than the hot part) So don't be afraid - wind it up)
Damn, I have antifreeze and oil cooled ... But even I'm afraid to wrap it up yet. A person like my turbo is standing and the body of the hot one burst.
Spool - do you mean acceleration of the turbine?
But because of this, the turbine itself will heat up more.
Yes, only with oil) Thermal tape reduces the cooling of gases in the manifold, thereby improving the turbine spool, and as a bonus it lowers the temperature in the engine compartment, which is also not bad)