music — Toyota Curren, 2.0 liter, 1996

Decided to spend some money on music.
I bought an Oriole amp 100.4 used in a commission for 4000 (thanks to the reagent for coming and giving it a check).
I went to Ekat and took a used Focal Polyglass 165 VR for 5000 with a soldered cross from the DSL (I listened to how it plays, it worked).
I took a sub. I didn’t want to fence a box in a small trunk, I decided to fry. The choice fell on DLS oa10, again, I took it for 2000. I think the Orioles are just enough to shake it. And I bought additional wires for 1500.
In the process of work, I bought a couple of sheets of the MP visomat and splenitis 4ki.
Cut a hole in iron. The shelf turned out to be narrow :( I tried to cut it as little as possible - cut it out, tried it on ... cut it out, tried it on. The speaker turned out to be very high ... I put it in a plywood shelf, and it was parallel to the iron shelf, in general, I barely put it
. doors. One layer of white splenium 4ki was glued with one sheet without cuts. The speakers are dead (one with a cut in the other center is jammed). They were installed in plywood rings (someone already opened the campaign), the left one dried out, changed, and the right one turned out to be normal. Noisy standard-vibration in and out (creating the effect of ZYA) and splenitis only outside (the whole sheet was breaking up in pieces).

The tweeters are in the process of installation, this is a hemorrhoid business - the manufacture of podiums ...
09/05/2011 The tweeters came from a broken kuren. With factory fasteners :)