Installed AGM battery Sprinter — Toyota Corolla Runx, 1.8 liter, 2005
Installed AGM battery Sprinter P12V1575. I had to redo the terminals, but it does not matter. I took a copper plate, crimped the wires into the connectors for the KG50 welding wire (I threw such a wire on the amplifiers). Weekend in the garage and done. I'm getting ready, so to speak, to install one and a half kilowatts of music :) At
first I turned like an airplane, but after frosts of -37 and several days of inactivity, it was discharged. But even at 11.9 volts at -30 it starts with a bang! Now I'm looking for a charger for AGM. I don’t want to give it to Battery Paradise, I’m afraid they can do harm there :) I’ll post a photo later. For now, there is.
Voltage, V: 12
Power 15 min. up to 1.6 V/el 25°С, W/unit: 1575
Capacity Sgo up to 1.75 V / el, Ah: 66
Weight, kg: 24
Short circuit current, A: 2200
Output type - bolted: M6
Mileage: 112.000 km
Manny55
Well, I put it instead of the usual one :) on the starter :)
Hey! Don't know where you can get one?
so the new yew is 6. a little expensive of course :)
I’m not for music, but for simple use, but so that the current would give a good one and not die in a year
It is made as usual, but the electrolyte is gel-like. It tolerates any fluctuations, upheavals, etc., unlike the usual acid drinker. Capable of delivering particularly high currents and resistant to deep discharge. Instead of terminals, M6 bolts :) A copper plate is made, and everything is already screwed onto it with a bus. I'll post a photo later.
strange terminals :)
almost like matches, is it plain or gel, something I don’t understand… what is AGM? And why does he need a special charge?
HELLO . Well, what did you buy charging for agm batteries? what kind of firm? I also need to charge my optima and I don’t know what charge to buy. in a branded video about optmas, they showed STEK charging