turning brake discs and replacing pads — logbook Toyota Corolla 2008
The first time I did such a thing, I will now look at the result. A groove without pads cost 1500 rubles.
Issue price: 3 300 ₽
In fact, it’s not only when it hits the steering wheel when braking, for example, I had a disc overheated in two radii, but it wasn’t driven, plus everything I already had deep grooves on the disc. In general, I decided to do this because it’s already 50,000 mileage, and I haven’t changed the brake discs yet and haven’t done anything with them
this is a groove of disks without removing the disk itself! when the steering wheel starts to hit when braking, it's time to do this procedure! Be sure to install new pads! I personally like the effect of this event!
like 1100 is for one disk.
Yes, it didn't work for me. It just grinded off the disc hard and the furrow remained along the edge. Another set of pads will wear out and you can throw out the discs.
Well, what makes sense to grind, 1100r. two disks or 1600 are new and it is not clear whether they are good or not. I know one thing for sure, if the discs are driven, and you have machined them, then they will never drive again, as the metal will relieve tension
I don’t know about you, we have a groove of 1500r. I bought new brakes for a fusion for 2300 rubles. Brembo
I have the same bullshit planned. But backgammon noticed such a thing that new native discs are cheaper than the groove of the old ones. Soon I'll change the pads, I'll go for a year and change the discs.
But I don’t want to change to stock anymore, I’ll look for something more cheerful.