We develop cleanliness (my salon) part 1 - Toyota Mark II, 2.0 l., 1990
Well, finally, they got their hands on in order to clean the interior. At first I just wanted to wash the seats, but I even got carried away ... was it worth it or not, you decide. I will try to describe the most (for me) problematic moments.
(photo from phone, please pardon)
Well, with the removal of the glove compartment and seats, there are no problems at all:
With the trim on the doors, too, turned off the handle, ripped off the rivets and everything is ok!
Front sill: unscrew the bolt at the front and pull back. There are such fasteners:
The rear sill, so it didn't work out, there are no bolts, we just tear off the rivets:
The pencil case is mounted on 4 bolts in it and 2 connect it to the console. Voila, no!
Bottom pillars of the middle pillars with latches: pull, tear.
Tops too, but here's the problem, strap! it is a lot of business to shoot it, I decided to pull it out (on a belt) and wash it.
"REST" for the left leg. We are looking for 2 circles, this is like a nut, unscrew, remove!
The floor in the rear part is held by 3 rivets, latches under the thresholds and a "rest". There are no fasteners under the part that goes under the panel. It is removed simply.
The lower ones, unlike the middle racks, have inserts. After removing them, the belt fastening takes place without problems. The pads themselves are on the latches. We pull.
Wonder thing, under the back seat! Until I took it off for the first time, I didn't even know about her!
On the B-pillar, a small but not pleasant jamb was found. So I had to take it off.
I deceived you by saying that there are many problems with her. ALL THE SAME! simply and easily. We open the cover on the belt mount, unscrew it there ... that's it!
And at once it was apparently too lazy to figure it out ...
And so ... everything is removed, wash and erase!
And a few pictures for comparison before and after washing.
Roof! Awesome drivers! wash your hair before driving your favorite cars! AND ALWAYS take off your MINK hats!
after…)))))
Seats! litter that sideways)
after
Well, let's start collecting!
We'll wash the pedals too!)))
The rear door trims are back in place.
Oops, more than 20 photos do not fit (((.
See part 2
Removed the roof today. washed everything, washed! it remains to assemble the driver's seat. and stick everything in place. (Yes, it seems to me that at this moment it is not bad either =) =) =) =) look at the WHA =) =) =))
Well, you have a superovy at that moment! And the engine is vigorous! And I'm waiting for the continuation ...)
Today I washed the floor, as it dries we will continue. It's a shorter thing, from it the cables go to the head restraints, you pull it down to the end. you can't do that without her. Why is this and what is the name I do not even know. but cool.
Into the hammer! Nishtyak you have arranged there! I look forward to continuing five in love!
And what for the belibird on the last photo ?!
I think to combine disassembly-washing-cleaning-assembly with shumkov gluing. In order not to disassemble twice ...
Well, then HOZ SOAP RULIT =) =) =) Take off Koneshn! There are not many smut with the ceiling!
no, I didn't. I cleaned everything on the spot. Cleaner Profoam 2000, foam for carpets and velor, Kirby vacuum cleaner ... You probably still have to take off and wash everything in the bathroom ...
VovanNumberOne
The result is impressive! And what did you clean the ceiling with? I washed my own with anything, but all the same it seems to be in barely noticeable spots ...
Powder, laundry soap, rubbed with a brush. Did you shoot yours?
The result is impressive! And what did you clean the ceiling with? I washed my own with anything, but all the same it seems to be in barely noticeable spots ...
Well done! :) Now I will work according to your recipe :-) just say:) did the rivets remain alive? :) or stock up right away :)? And also :) did you fix the driver's seat? :)