Hub spacers! - Toyota Corolla, 1.6L, 2007

Always please =)

For my needs, excellent and sufficient!
Thanks for the comment! )))))

Not enough, I have + 20mm =)

The studs were just enough, the length of the free thread was 11mm))
well, there were simply no such discs available. And I didn't want to wait 60-70 days)))

Objective necessity;) were there enough hairpins?
that is why it is better to immediately choose casting with the correct offset

do not worry))

Max88

Listen, does the fact that the front and rear track widths are different?

Affects! The Corolla has a front track of 152.5 cm and a rear 152 cm. these are the basic settings, now the track 152.5 and 152.6 wheels follow each other =) it has become smoother.

Didn't look at the date of the comment =) In general, litter if the question is not relevant.

Nicky couldn't tell the difference. I don’t think 6mm will decide something)))

Listen, does the fact that the front and rear track widths are different?

ilya-mark2

I think the bearings will detect the difference much faster than necessary, but in general it's just fire.

6mm. do not decide. The bearing (during normal operation of the car) will not be affected in any way.

Didn't look at the date of the comment =) In general, litter if the question is not relevant.

In general, I think that the bearings should first of all feel the difference when installing 17 or 18 wheels. Well, the spacers, it is, in the appendage! )))))

I think the bearings will detect the difference much faster than necessary, but in general it's just fire.

gywex

There was no drawing, I drove into the service, they removed the rim, and made a "mud" drawing from it.
This was the inner plane of the disc that was redrawn onto paper.
So they did the spacers!

and in what service? and how much does it cost?

why this device?
just for beauty?%)

There was no drawing, I drove into the service, they removed the rim, and made a "mud" drawing from it.
This was the inner plane of the disc that was redrawn onto paper.
So they did the spacers!

And I could throw off the dimensions, if of course, or the drawing is there ... I want to order these.
Thanks!

No! Even with 18 rollers, lowered springs and 3 sacks of potatoes in the trunk,

Do not overwrite the rear arches under load on the car, when installing these spacers?

I noticed that the departure of the light Camry is not enough, for this there are reflections on the spacers! ;)

I am thinking about installing this device, at least on the rear wheels. I want to fly no more than 1 centimeter. Of course, I have read about bearings, but that does not stop, especially since the overhang is not critically large 0.6 or 1 cm. The
question to you, is it clear in the pictures, but did you feel the difference in your spacers visually?

For deeeens!
Yes, visually the difference is visible even in these 6mm! It's just that if more than 7-8mm, then these will no longer be spacers, but plan-washers. With your studs and new bolts! Put it on and don't even think. No, absolutely no load will be anywhere)))

gywex

Well, I see how thick you put the spacer and what it will be made of))
if 20-30mm. then I think the load will be a little more, but not so critical that the bearings are taken and immediately collapsed

And what about your spacers? And still the question is if 8mm studs are enough for relatives?

I don't know yet from what, I saw a couple on Ibei ... there are heavy metal that looks like stainless steel,
there are durable aluminum ... I can't do it myself, there is no access to handy craftsmen / turners here either ... These only remained in the CIS.
Or you can put the spacers only on the rear ones, and not touch the front ... does it not affect anything, or should they be installed everywhere? ..

Well, I see how thick you put the spacer and what it will be made of))
if 20-30mm. then I think the load will be a little more, but not so critical that the bearings are taken and immediately collapsed

With spacers, of course, it's cooler,,, in my Leganza I also want to put a 20-30mm departure,,,
Ho heard and read that the load on the bearing increases with the spacer, etc. ...
I have 205mm wheels, 15-inch disc, 5 bolts , a car for a quiet
ride on normal roads,, what do you say - there will be no consequences?

And where did the spacers do? otherwise the identity was urgently needed))

and I would not be disturbed, throw off the address where you ordered)

rather it will not affect the bearings, but on the silent blocks and ball bearings, the lever is more bending moment, but if 40 mm, like my patrick, it will already be noticeable, but he does not care, he still has bridges and 5-6 mm is not even about not visible to the naked eye

the hub will eat the attachment. what prefix and what will be eaten. xbox or something

Good night) tell me, I want to put on the back of the spacers 6mm disc width 6.5j Rubber 215 and the departure with spacers will be somewhere around 47. The question is: one Mazdavod said that there will be a beat and that the hub will eat the prefix? What do you say? That the disc will not be on the hub, like your flight with 6mm prefixes

the reasoning of summer residents.