Tuning taillights)) - Toyota Caldina, 2.0 l., 2000
After a little thought and reflection, I decided to slightly modify the taillights and make them colorless. Everything took 2 hours of time and a little "haemorrhoid" and voila, look what happened!
I replaced the stock bulbs with LEDs (of course I had to look for them a little, especially the one that was placed on the stop and the size, it is 2-pin) I had to suffer a little with the turn signals, but equipment came to the rescue here too: a diode light, orange, was bought, there is a round plate of diodes on top, which shines forward (it looked like a sludge), this plate sits on the sealant, I pulled it out and turned it horizontally, it turned out that the diodes shine down the headlights and are normally reflected))
Price tag: 2 500 ₽
Thanks! Of course I have been to Yaroslavl, but I never got to the drag, so I drive in Moscow in the club "Independence"
And where did you buy diodes ?! :) not a bad idea, as an option for myself I will do a similar thing))))
I've just disassembled mine, but then how to collect them? there is no sealant as such. How did you collect? Glued glass or what?
disassembled with a concentrator knife, cut between the plastic and the "glass" until the knife falls between them inside and becomes a wedge)) and then you drive it and the headlight is unstuck. only you need to do it carefully - you can break it!