Installation of various s / h that came by mail - Toyota Crown, 2.0 l., 1981
Put a green round glass in the O / D switch
Replace the petrol level sensor in the tank
Repair the damaged trim of the driver's door
Replace the light on the inner handle in the right rear door
Everything is done, though the gasoline level does not show and the remainder lamp does not light :(
Price tag: 960 ₽ Mileage: 129,900 kmAnd if it does not work, you can rewire the variable resistance resistor in the tank.
Looking for friends who have the same car! If the fuel residual lamp is working - go and do not worry!
where do you order spare parts? I also have a problem with the gasoline level sensor
no, I put a piece of exactly the same dermantine (from the same machine) under the original skin
Of course there is - right here in this expansion. Blue dermantine from the same car, from the middle racks - you can see it in the original photos.
I also had it after the purchase. I immediately tore it off and glued it so that it would not creep, as I found the dermantin, I changed it.
Apparently, the problems of the cladding
have recently seen the same crown - also all the cladding burst in these places and all in pieces of electrical tape
As for the lamp, by a very simple modification with a copper wire from a transformer and a soldering iron, everything starts to work, however, it flashes like in a Zhiguli, and does not light up smoothly. The price of the issue is free!
the remaining fuel just does not show, I found the original sensor, 2500 costs, a little expensive, I'll try to pick up from others