Sprayers from Camry 30ki - Toyota Carina E, 2.0 L, 1992
Today were purchased and installed a fan type glass washer spray. On the recommendation of a friend, he took a spray from the Camry 30ki. Catalog number 85381-AA042. The name NOZZLE ASSY (300N / 301N). They are exactly like Karin's and stand up perfectly. For installation, it took another 30cm of tube with an inner diameter of 5mm. It is possible from a VAZ or another (I took a silicone one).
1. disconnect the tubes from the old sprinklers.
2. Press the sprinkler latches with our hands (no need for screwdrivers and other things - everything is done perfectly from the inside with our hands).
3. we take out the old sprinklers and put new ones
4. a short tube can be connected without changes, but a long one (to the driver's sprinkler) is not enough. Therefore, we measure the stored one and install it.
Voila, you're done. Everything takes 15 minutes.
Happy as an elephant! One press and all glass is wet. And as a bonus, there are no drips on the hood after splashing.
The price of the issue is $ 20.
Mileage: 212,500 km
Clearly, well, you look, if it's not difficult, but you really want a similar thing :) thanks
Hello Subject. There is no height adjustment. In general, there are no adjustments. But they put it on a pradik or on a Lexus jeep (like there is a report on the drive - I'll look and throw you a link) and like the rules he wrote. And if we do not find the links, then you can remove my squirt box and attach it to you. And then everything will become clear :)
Dim hello! Tell me, do the new sprinklers have vertical adjustment?
It's just that I want myself for a long time, I just think that they won't fit from a sedan, etc. my glass is much higher and at a different angle, that is, it will splash very low.
It's my pleasure. Gradually I will watch my friends' squirt (who is ripe for such an upgrade) and pull up compatible cars.
Subject, article www.drive2.ru/cars/toyota..rnal/4035225266123984126/ on replacing pistok on pradik.
on relatives and Kamrevsky in different ways the fitting comes out. The photo shows. And because of this, the native hose on one spray bottle bends (literally 1cm is not enough)
Cool, too, probably I’ll order myself, but the current is not clear if everything is the same. ... The entrance sprinkles themselves seem to be the same, or where did I understand?