Now it's time to change wheels - Toyota Land Cruiser Prado, 3.4 L, 1998

Sorry, I just didn't notice,
I'll check it out :)

So I immediately posted the last entry in the bortovik. It turned out somewhere 17mm

well, you show the photo, we will check
it out as I did not notice it there should be a change of at least 20mm

So I put enough studs. Only I did not see the difference (

something is clear I doubt it
usually they don’t make such a stock,
well, this is not a problem in all cities there are car markets and there are guys who sell sports reinforced
sports studs because they are stronger because
they must be stronger to hold such a take-out

Yes, it should be enough. Let's see

Well, I mean that they are not enough in length if you put spacers have
to buy new ones!

Hairpins. What?

do you have bolts or studs?

Well, you're right. Right now I thought of another muddle. I will saw off the old spacers and make the wheels out.

well done that he noticed in time
because if the microcracks have gone, then you can grab such a brake wedge in a puddle, from a scattered disc that popandos on the suspension;)

Well, yes there are krendili and abruptly. And I have vidish from the inside, so I decided to look at the parking brake pads and noticed this kind of garbage. So I saw that it was time to change, well, I thought I'll pull it again, but here it is. Fortunately, 15 began to ride it while I was interrupted.

Well, you look at your title photo and it is immediately clear why the cracks on the disks :)))
this is not a lot of wear and tear, once I saw a chela who came because he had something creaking during braking :) so he already had one side only the edges on the disk :))))