Two reverse moves. - Toyota Corolla, 1.6L, 2008
Finally, I made the second reverse, it turned out symmetrically and at night it became much brighter. In the printer, it is not difficult to do this with a hairdryer and a couple of screwdrivers, warm it up, pull out the reflector itself and pop the red filter. After the filter I cut it and broke it easily pulled out. Well, and then insert it. heat the reflector and return the plastic to its place, i.e. press it in a circle, then connect it to the reversing lamp.
Quiksilver
+5
For symmetry! So much better!)
I finally can get mad if it's honest. I don't understand why they did it ... but with white people it is much better to look at)
=) I did a little differently) but it turned out the same) ... well done for the work done.
Nothing) I'm thinking how to connect it. I think just disconnect the standard wire and stretch it out. but without foglights at all). I think it is necessary to change it safely or not?
Well, of course, it works from the handle when you turn on the tumanku, but what?
And without a hairdryer you can - if you are careful) the main thing is not afraid to break and do it carefully).
You pull out the reflector like a thread) help with a screwdriver, etc.) In general, it is difficult but possible.
In parallel, white and gray is a minus and red and blue are plus you throw 2 wires, connect + to +, and -k- and everything burns.