A manual for the martyrs or how I solved the problem with breakdowns - Toyota Land Cruiser Prado, 3.4 L, 1998
Or how I conquered a one year old problem. The whole reason is the breakdown of the rear suspension. What I just didn’t do springs, salen blocks, spacers between branches, trimming bumpers, and finally found. It's all about the rear cushions of the body and the frame of the most, very rear. Struck 2.5 tyk for spare parts. rub from Moscow and 1.5 tyk. rub. month from the Emirates. (for one pillow). Well, I think I'll try to pokulibenit. And everything worked out the issue price of 180 rubles.
What he did: He took off the pillows, squeezed out the old silent block, got one body from it. Then from the top he put a pillow from the UAZ, too, the frame / body, put it all back, put the pillow of the GAZ-66 handout from the bottom, twisted it all.)))) Now you can't recognize the car. Which is very happy)))))
Price tag: 180 ₽cool =) from Oise to Toyota little things are suitable =)
I wonder how much the box from Toyota will fit the Oise =)
Well, I don't know in a scientific way. This is probably the only way. I did what I did and I usually do. I take a spare part in this case, the pillow body and went to the spare parts (freight, gas, UAZ) You walk, ask, measure, well, and sometimes it turns out less time and cheaper. Here Glushak recently removed the sealing rings from the ZILA there as well, as relatives stood up. So experiment.
I read on the UAZ that someone inserted a box from a Toyota ... it is interesting to put it from Padzherik. it would be cool.
Yes, everything seems to be clear! There is nothing to jack up, raise the body above the frame inappropriately ?!
It was a long time ago my friend. But the bolts seem to be old. But from the picture, everything is clear, what to do? If not, then ask, I will try to explain on my fingers)))
I have the same problem! Yesterday, too, I got to the rear pillows, but I can't unscrew the bolts, the edges are drawn around. I decided to look in the net, and here your post-Uraaa, I'm not the only one like that))) The question-bolts that fasten the cushion body were drilled or unscrewed? I'm just afraid to drill too much!