3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First

Engine ... 3 day ... - Toyota Will VS, 1.8 liter, 2001

Engine  3 day  - Toyota Will VS 18 liter 2001

... day three ...

dismantled everything except the pallet ...
we remove ...

removed the pallet, unscrewed the connecting rods in turn, well, that's the pistons ...
piston rings are running around normally, but with oily opa.
they do not move at all, respectively, the holes under them are all clogged.
let's disassemble clean, fun horror) every minute for 20-30. carbon deposits on top of the piston, not completely cleaned off as an extreme situation appeared, it is necessary to move out of the garage (((((but this later ...

cleaned the pistons, washed, blew holes.

step two. put back. Well Seryoga has been taking apart engines with me since the age of 16, otherwise I would have broken all the rings))) he put everything. but by the way, they put it with the help of the ring tensioner for the piston (a handy thing, from my photo) and not as before with pliers)

cleaned the sealant from the chain cover, pallet, from the engines where they were)

laundered the head covers and chain covers.

we got into the oil with removable caps (
fun, ... it was not possible to remove the end caps , since it is better to remove with a special tool to unlock the valves (the
result was left for tomorrow at home. (it may turn out that the thread

then we drove out of the garage on a tow rope on baby Vitze ... and pulls the same small one)

the rest was left for tomorrow ...

below is a little photo ... then I take pictures before ...

Engine  3 day  - Toyota Will VS 18 liter 2001Engine  3 day  - Toyota Will VS 18 liter 2001Engine  3 day  - Toyota Will VS 18 liter 2001Engine  3 day  - Toyota Will VS 18 liter 2001Engine  3 day  - Toyota Will VS 18 liter 2001Engine  3 day  - Toyota Will VS 18 liter 2001 Mileage: 115,600 km
214 Comments
Sort by:
S
SergioTa 06.12.20

dak Lyokh, I was there so much G ... pulled out, what kind of oil, there the needle pierced everything with difficulty)

M
Missory 06.12.20

>> blew holes.
yes, yes, you have this fucking important :)

S
SergioTa 06.12.20

sf333

live and learn =)

exactly! ..

i
ironbrew 06.12.20

...;)

s
sf333 06.12.20

ironbrew

soot is due to oil that gets on the piston, due to stuck rings, which are no longer able to maintain tightness, and burns there accordingly

live and learn =)

S
SergioTa 06.12.20

and in full)

i
ironbrew 06.12.20

soot is due to oil that gets on the piston, due to stuck rings, which are no longer able to maintain tightness, and burns there accordingly

s
sf333 06.12.20

well, it’s
bad, but
gray thick syudym =)

i
ironbrew 06.12.20

sf333

really TIN
you see, it's not in vain that you disassembled
this gasoline we have

and gasoline has something to do with it -)

S
SergioTa 06.12.20

anyway

s
sf333 06.12.20

really TIN
you see, it's not in vain that you disassembled
this gasoline we have

S
SergioTa 06.12.20

THE PISTON BATH WAS PERSONALLY MEASURED-2,3MM)))

s
sf333 06.12.20

tin plate, small carbon deposits

S
SergioTa 06.12.20

well sorry, sorry)

D
DIMA-PROJECT 06.12.20

SergioTa

Hello, we arrived))))) Why are you dim) and nah I take it
apart then) you just woke up or joked like that) OF course FOR REPLACEMENT)

it's gut!
and then you write: "step two. put it back.")))

i
ironbrew 06.12.20

tough

S
SergioTa 06.12.20

ironbrew

on this I completely agree with you
at the stations the fuckers work, but here - myself

ha, today I was hovering at home, because of these dryers, well, in Novosibirsk, at least three hundred are marked, with which people with our problems, and left with old details) in short, change a hundred MSK with your own and leave)

S
SergioTa 06.12.20

raised the question of rakskoksovke ... and so ... a hundred poods identically garbage! because I saw how it really does NOT help!)

i
ironbrew 06.12.20

on this I completely agree with you
at the stations the fuckers work, but here - myself

S
SergioTa 06.12.20

but it was worth it to disassemble, all the same at the station they will not do it as for themselves, how you yourself will clean everything and wash it)

i
ironbrew 06.12.20

exactly -)

S
SergioTa 06.12.20

yes changed) just in the parks you do everything, but you still scribble here too)

i
ironbrew 06.12.20

yes, you just wrote it so it's not clear whether you changed them or not

S
SergioTa 06.12.20

Hello, we arrived))))) Why are you dim) and nah I take it
apart then) you just woke up or joked like that) OF course FOR REPLACEMENT)

D
DIMA-PROJECT 06.12.20

Interesting))) we are
waiting for further report.
don't you change your ring?

S
SergioTa 06.12.20

))))))))

i
ironbrew 06.12.20

only a total bulkhead will save the father of Russian democracy -)

P.S. missed the button -)

I
IliaMarkSib 06.12.20

Wow, how dirty the pistons are ... Coke ...)