The wheel — a quick method of removing the cutting and thickening of the skin over the old one
Hello)
If you view my blog, you will see there my methods of removing the cut. By means of a narrow tape wound on the wheel glue up, etc, etc. the Method is of course good, but there are nuances.
1. Tedious and long. Really goes from one hour to one and a half on the withdrawal cut. If the seam is macrame is still somehow justified. But if the tree, a stupid waste of time. The Christmas tree was inserted braid, glued and sewn as a person))) No unnecessary movements.
2. Not cheap. Cattle are looking well, Eric Krause, sticks well. Little bean 50 rubles worth. And it is necessary for them to run around town. Hell find. Bought them in stacks)
3. Not always accurate. Were always distortions in the locations of the grooves, had to adjust and cut the material after the fact.
Further revealed another interesting detail. It seams I have always done the arc, as bequeathed by Lenin. Say so correctly, the seam takes a direct form of steering. I watched the blogs and pictures of the masters and thought about morons, they have the straight seam. Really thought I was. I when the old braid off from the steering wheel, it's the arc lies. This means that the seam should be arc. In the delirium. I did the first steering wheel "straight" in the transverse seams . And what do you think? Yes falls vsse as a native, Najera this hemorrhoids? ))))
Me Alex aav1711 have been told that my method is long and tedious and that I complicate myself a job... I Should have just listened to him.
Came to me rules with Lancer. Mileage 10 000 , the steering wheel rubbed in locations of the transverse joints. They are factory Packed and rolled. Of course they rubbed. People were asked to make a small bulge.
Thickening always did the old leatherette or leather. Again Alex aav1711 and Oleg www.drive2.ru/my/messages/1062075 led me to a solution. If the skin is tolerable, then pull over) Well ahead of th snot to pull)
Slotted grooves on the old joints, with tweezers removed the second layer of the skin
Remove the old filament to reduce cones, podmareva. The skin was glued somehow blew all that off and put on KLEIBERIT. It's all long. Transitions on the needles to the pads cut and postural too.
The wheel is ready.
Now the most interesting. Measure the lengths of all segments (from groove to groove). Also measure the circumference of the upper rim. And from the center to the edge plus 3-5 cm in any case for the side and bottom of the rim. Length take for skin and leather the same as the length of the segment. The skin is well pulled, the more the leather. Still going to trim off the excess. If the skin stretches poorly, I have nappa leather available, then add 3-5cm in length.
Right on the steering wheel make a mark
Cut. The whole instrument seen in the photo . Nothing more.
Take the top part and sew on the left (just for example, you can start from anywhere)
Sure beats the heart of all the segments, from it and dance. For convenience, slap in the center circle breakdown and in the beginning chatter the stapler, so as not to catch millimeters . Very fast and convenient
the circumference of the rim is 10.5 cm to Sew to size with hook up. I played safe and made no more zakrepiv. Then just dissolved to the desired size and tie knots in Nairit.
Cut Lyosha in the region. In fact, there all worried about the depth and width of grooves. Standard width — 3 mm. And the depth of the missing head 1mm. As I have — the depth of the groove is the thickness of the skin The same 1mm. All the fun lies.
Clamping finger groove. Pulled with a good tension in one direction, squeezed with a fingernail. Let go of the hand that held the flute, took the pen — gave the mark for the nail. Again the seam in the groove, pulled in the other direction, again mark.
Need to pull well. Directly good. Here is stretch to the max, like a bowstring on the bow and relax a bit. And this is the most perfect tension. I think that made the tension on the braid that is necessary when putting on the braid for about 30-60 seconds))) With force, hard, but wear. Much to do the stretch will crawl the transverse seams. Poorly, even worse, go cellulite, transverse folds.
From mark took a 1cm seam allowance, straight line sew the next segment. Again hold down the groove, pulled — note. And so while the ring will not merge)
Put the braid
Further all is standard. Glue, customize, etc. is Nothing new. About the seam herringbone I wrote already, will soon make about macrame. For each seam you need to apply glue. For macrame glue only the outer part of the rim and spokes, for Christmas trees glue all closer to the seam a little glue to hold the material. As marked out the seam, undermine the leatherette at 1 cm and sew.
That's what happened. The first time I tried to sew faux leather on the Aurora microfiber. The material is very dense and very thick. Imitation leather ideal . But he did not come to a seam tree. The nodules turned out to be very hard and inhomogeneous. It is not suitable for Christmas trees. If even simple leatherette somehow to train the perforation very viscous and elastic, as soon as it go, then immediately on another sewn. In short only macrome this leatherette. Formed on the wheel is perfect, no creases, etc. Although the main thing is hands...
The thread by the way very interesting. Italian Shoe thread. Very cool, flat and waxed. Not volosataya, not dissolved. Her work is a pleasure, for such work. Recommend
Like the way you factory soucci on the car for almost a million? huh? )))
StrusVlad
And you is the quality like? What is this seam like this humpback? In the photo you can even see...the skin must lie in the seam as the top, smooth and without folds and increased... And the stitch is beautiful to do...the tree not the most beautiful...Sorry for the criticism...not out of anger)) I can show how I did)
At Expo from the factory! Shev is not better...
The pathologist on Ford wheels sew!))
And the temperature which must be that the skin is not cracked? Household hair dryer will suffice or industrial need?
Tell me please, is it possible to straighten dents on the leather steering wheel? Read about the Hairdryer about a wet rag... You I see rummage in the skin, tell me something. Leather is OK, not worn, just the wheel is probably kept under some sort of heavy objects...
777monah777
Until I met a new car which has something happens to the wheel 10t. Whether it is Chinese or high-end Porsche.
Mitsubishi Pajero sport. Chat with the owners...
Wheels changed under warranty.
> for every taste and color
In my opinion just ask, but I'm also not in the literal sense.
nick307
No. The material will be turned
adhesive tape on the back side to stick?Factories so after doing...Yes ...not on the skin but on the tires, but here may be appropriate.
Here I am just one of 5-7 specialists agreed to do utolenie, just in the same way over the old skin, the rest do not know)))
DENS64RUS
The thread is Italian, flat. We will not find these. It reinforced?
This is a braided waxed polyester thread for hand sewing, in the repair and manufacture of footwear still being used. At any store that sells supplies for shoemaking come - there they are, thickness 0.8 - 1.0 (Titanium, Jaffna) prices in the district 200rub . Or Ali to order the same thing almost.
After several years of operation, is erased, leaving a thin thread? Or it generally is not erased?
As reinforced not reinforced... What? Thread wax 0.8 mm is impossible to break the hand
That has not kept the old photos, it has managed to wipe then to the hole.
So this section of the helm at all difficult to wear, he's not that involved in the contact zone with the hands.
nick307
On new machines starts to peretiraetsya for 10 000km.
Factory wheels are sewn manually, but the flow. There just sweep
By the time I drive about 1.5 years
LRRRClassic
Very often neskladuhi with the size obtained from the skin and its manufacture. There is a special leather for steering, other leather not suitable For... seats and finish the same.
I'm not special leather for steering the steering wheel made and I thought it'll go longer special 😁 now 20 tisam suitable mileage, the mold was made off the skin of her helm.
Mental wear...I have the feeling that in that picture the driver always went with dirty hands.
Good day! Transcripts! On the Octavia 4 spokes to pull also, thickening can know the cost and timeframe? Thank you!
I recently tried something did not work to spread, in fact, be normal. For the beginning I tried just on a sheet of paper to transfer the cut "pattern" of painting — the shape came out completely slurred... I was looking for the option how it is humanly thing to do. I think I found something, will try)
P. S. Great article, like even it is clear that how and where)
I'm so happy for you. You have no idea how😂 never in this way did not intend to. It does not mean high professionalizma
When I pull the wheel, it was completely wrapped in several layers of molar band, respectively, then where will the place of stitching cut and gently peel off the wheel, and it turns out the template.
Cool, but not understand half because I'm not a tailor 😉 when will need to understand 😉
DUNEGT
Sorry for the rudeness then. Normal working ignorant, tobish you. learning to pull the leather on the steering wheel, talking very. I for example Geophysics and master of rally sports. The category of tennis. 11 years of piano and 7 of the saxophone. and I your work, even work doesn't seem!)
ordinary laborer who consider sewing with leather — a great thing. Attendants You all!)))
By the way if his mouth opens in my party ))) I can make the wheel, badly, but I can. Go through the engine — good )) you cannot do anything not in Geophysics, not the piano hurriedly. To work with your hands — do not brag about anything. This is an indication that you did not go to learn Anywhere. And a good mine at bad game :)
you're jealous that you can't work with your hands? only the tongue and head. who needs your fortepiano with the saxophone if you need to change the wiring in the apartment or build on the country bath. run, probably, leaving his piano, in pants with podvorotni to hire these craftsmen
internet-hero
The most fun that any moron sit at the piano and the saxophone at 11 and 7 years and they will be able to play the same as you, the master of rally sports... same thing. And in fact it is all the work of his hands and by your own logic, does not seem to work. If I sit to play the piano will not play and complete shit due to lack of skills on the piano as you sit down to alter the wheel and it would be complete shit due to lack of experience and knowledge.
From here you can make a simple conclusion — you are a common laborer who knows how to play the piano and saxophone, I think that it kind of elevates him over others...(you're just a pathetic master of sports in rally, not the Director of any rally team that sits on his ass and gets grandmother for the very "possession" of this team, and not the Director of any orchestra)
Are you serious about keep a moron? Sorry — and how much time is necessary to learn. Your conclusion — just fire)) I have my own company and their production of the cable) that you now eat and I'm in the bathroom are giving the instructions of servants like you. Not taking in your head the word talent, not a gift. So gaikoku, changing all its Yardstick.
DUNEGT
If the artist works with his hands. We live on different planets and it's perfect!) if your any, you are likely one of those who believes "that every cook, able to lead the state" VI Ulyanov) I'm still one of those who believes that the Romanovs, 350 years still learned something) also, do not start the conversation in the direction "by your logic". In my answer I did, you probably refer to her!)
Yes Yes! you are apparently of the Romanovs)) and we are all peasants uneducated)) cooks and laborers, we understand the idea))
internet-hero
Seriously? And here's the artist? You said that the wheel will be able to alter and do not care that the bad happens. I said that anyone can play the piano or sax and do not care that the bad happens... what's the difference? To play the piano hurriedly? And you famously played on the piano hurriedly if or when not playing the piano? And the fact that it can learn any person is a fact and it is foolish to argue with that. Again, you started to poke their ridiculous achievements considering that it's for you as rise above the others, you have no idea what can the author and what are his outside interests. Poked like "I niibatsa hero will be able to sort out the engine, and a piano to play, and all of you because no one in Geophysics, not fumble, or the piano can't play" nu ahuet talents. 2 questions immediately arise: 1. Why the heck do I know Geophysics and play the piano? 2. These two classes are somehow elite define you, or servants?
Got off topic and late.))) "DUNEGT" wrote about artists, and I do not understand it, studied at hood.school, and there put the hands as well as musicians. Seriously, a few weeks you will learn to hold a pencil.) So here he missed. I dropped out and went to the music...and damn to play on percussion instruments — is also needed to train and teach hands (and even feet), to develop coordination, etc., and only then think about higher matters.) On the actual subject, I believe that fellow man that works with his hands, interesting and develops among other things.
Not determined heights. Especially do not think that my as you say "achievements" exalt or belittle me, to the outside world. I say that to learn to work on CNC, simpler, less intellectually costly. My personal opinion, the use in one sentence the CNC and piano, at least ridiculous. His opinion — not impose.
Seriously? And here's the artist? You said that the wheel will be able to alter and do not care that the bad happens. I said that anyone can play the piano or sax and do not care that the bad happens... what's the difference? To play the piano hurriedly? And you famously played on the piano hurriedly if or when not playing the piano? And the fact that it can learn any person is a fact and it is foolish to argue with that. Again, you started to poke their ridiculous achievements considering that it's for you as rise above the others, you have no idea what can the author and what are his outside interests. Poked like "I niibatsa hero will be able to sort out the engine, and a piano to play, and all of you because no one in Geophysics, not fumble, or the piano can't play" nu ahuet talents. 2 questions immediately arise: 1. Why the heck do I know Geophysics and play the piano? 2. These two classes are somehow elite define you, or servants?
If the artist works with his hands. We live on different planets and it's perfect!) if your any, you are likely one of those who believes "that every cook, able to lead the state" VI Ulyanov) I'm still one of those who believes that the Romanovs, 350 years still learned something) also, do not start the conversation in the direction "by your logic". In my answer I did, you probably refer to her!)
DUNEGT
Sorry for the rudeness then. Normal working ignorant, tobish you. learning to pull the leather on the steering wheel, talking very. I for example Geophysics and master of rally sports. The category of tennis. 11 years of piano and 7 of the saxophone. and I your work, even work doesn't seem!)
ordinary laborer who consider sewing with leather — a great thing. Attendants You all!)))
By the way if his mouth opens in my party ))) I can make the wheel, badly, but I can. Go through the engine — good )) you cannot do anything not in Geophysics, not the piano hurriedly. To work with your hands — do not brag about anything. This is an indication that you did not go to learn Anywhere. And a good mine at bad game :)
The most fun that any moron sit at the piano and the saxophone at 11 and 7 years and they will be able to play the same as you, the master of rally sports... same thing. And in fact it is all the work of his hands and by your own logic, does not seem to work. If I sit to play the piano will not play and complete shit due to lack of skills on the piano as you sit down to alter the wheel and it would be complete shit due to lack of experience and knowledge.
From here you can make a simple conclusion — you are a common laborer who knows how to play the piano and saxophone, I think that it kind of elevates him over others...(you're just a pathetic master of sports in rally, not the Director of any rally team that sits on his ass and gets grandmother for the very "possession" of this team, and not the Director of any orchestra)
DUNEGT
Sorry for the rudeness then. Normal working ignorant, tobish you. learning to pull the leather on the steering wheel, talking very. I for example Geophysics and master of rally sports. The category of tennis. 11 years of piano and 7 of the saxophone. and I your work, even work doesn't seem!)
ordinary laborer who consider sewing with leather — a great thing. Attendants You all!)))
By the way if his mouth opens in my party ))) I can make the wheel, badly, but I can. Go through the engine — good )) you cannot do anything not in Geophysics, not the piano hurriedly. To work with your hands — do not brag about anything. This is an indication that you did not go to learn Anywhere. And a good mine at bad game :)
I'm sorry, Dear "Spec-in-all", but how do You have so much gall? Man found himself, like his works to others. The writers can say the same thing: I can write all sorts of novels, the sex, etc. Let them, no one will read, let every word be after 4 mistakes, but write I will.
One word:
"... Who sews pants guys?
Well, of course, not a pilot!
The pilot drives the aircraft
It is very good!
The cook makes compotes —
It is also good.
The doctor heals us from measles,
There is a teacher in the school...
All professions are important,
All sorts of people need." S. Mikhalkov
puhskin
something in doubt that the school that overcame the average not to mention saxophone))
Plya) is not looked at once ))) crest of emergency flies in default ), resident of Ukraine is not equal to the crest)) but the smell issues — I even decided to check and bingo))) good luck on the roads and in life))
Yes, we shit on your performance (as well as you our) in fact you ignorantly write, and the knowledge of your "engineering in any industry," says that you have no idea what you are talking about))) "and as a consequence" pseudointellectuals incoherent nonsense, like a motherfucking knowledge engineering in any of the areas))) what areas?! Vologda and Nizhny Novgorod?)) the RAM you! don't need anybody to come down, write, study engineer)) the fact that you write like losers, says at least that you are not working with documents and will certainly not be any documentation, as an engineer you be concerned with the texts and with the need to make them up i.e. no letters, nothing)) or you would ridicule your colleagues engineer)) so do not puff brains to anybody here)) good luck to you, Professor, chemical and engineering Sciences!
You know, for me, an indicator of education, not the ability to write correctly, but knowledge of the exact Sciences. For example, the value of your car, can talk about knowledge engineering in any industry and as a consequence — your not a big income) but I need to you to come, is really mind to have) so let things remain as they are) and Your doubts also with You)
Ps — cubic Zirconia and a diamond kind of look the same ))))
DUNEGT
When you do not what to say on the subject, talk about spelling and phonetics)) (C)
something in doubt that the school that overcame the average not to mention saxophone))
DUNEGT
Sorry for the rudeness then. Normal working ignorant, tobish you. learning to pull the leather on the steering wheel, talking very. I for example Geophysics and master of rally sports. The category of tennis. 11 years of piano and 7 of the saxophone. and I your work, even work doesn't seem!)
ordinary laborer who consider sewing with leather — a great thing. Attendants You all!)))
By the way if his mouth opens in my party ))) I can make the wheel, badly, but I can. Go through the engine — good )) you cannot do anything not in Geophysics, not the piano hurriedly. To work with your hands — do not brag about anything. This is an indication that you did not go to learn Anywhere. And a good mine at bad game :)
* not in Geophysics, not on the piano* NO, actually it is spelled...learn ABC... geophysicist...)) Hands one to work, some *scientists*divorced!
nick307
Okay... never over tighten and give a person tips that it for money making )))
Just for fun — what do you do?
Sorry for the rudeness then. Normal working ignorant, tobish you. learning to pull the leather on the steering wheel, talking very. I for example Geophysics and master of rally sports. The category of tennis. 11 years of piano and 7 of the saxophone. and I your work, even work doesn't seem!)
ordinary laborer who consider sewing with leather — a great thing. Attendants You all!)))
By the way if his mouth opens in my party ))) I can make the wheel, badly, but I can. Go through the engine — good )) you cannot do anything not in Geophysics, not the piano hurriedly. To work with your hands — do not brag about anything. This is an indication that you did not go to learn Anywhere. And a good mine at bad game :)
I'm talking about normal autocoro say. What do you mean "your". I all work. I'm telling you for the normal skin type wolsdorf, Paloma, another Italy or Germany.
I terus on a huge Shoe warehouse. Started with the skin. It's not that. And the view is not the same quality.
I see you there satircal and began to turn his head and laugh, but it's true
Hi. Shoe repair, they have a lot of good and high quality leather. BJ look at the wheel and two handles out of about 1000 RUB If not the blue, it is cheaper.
Hi Dan advise the best option for the straight. Where what to take and she goes SK?
Do everything differently. I've always made from real leather, the rest is shit I don't recognize. Seam Christmas tree like plant in the same sew. Thread found you, thank you.)) Work is a pleasure.
777monah777
Until I met a new car which has something happens to the wheel 10t. Whether it is Chinese or high-end Porsche.
...The Opel meriva is the same...a heated steering wheel. Tin 10-15ооо. warranty replacement
What srach some people threw in comments? Not like a post, pass by! If you like, then ask the author the details, the nuances. The man himself did the work, it is very much worth it.The author, don't listen to "friends", do not waste your nerves, it's not worth it!
Good day! Question:when fitting the leather around the circumference of the helm is not reduced in diameter by the width of the wheel?
For DUNEGT! You're not just uneducated lout as it seems on the surface - you're just a REDNECK! And what about the smell, so you hear the stench of his rotten nature!.. R. S. Can not work hard to continue the discussion, I said!(that banned the public comments--CRAP!)))_
nick307
I have a Fortuna. I cut grooves as well. No fortune on the rudders will not replace groove. Not
Especially on the maps...On handlebars put the tree
Uh-uh!Don't speed up!On this machine, just no photos!But if swift so sometimes in my publications, if unbearable...Dig!
Grooves cut into 10 minutes.
Another view a bit better.
And can I see your work?
Don't like such talk, when one says that the best you can and not showing, and says to the one who shows a lot)))))
Strange...With the acquisition of fortune forgot (scored) on the grooves...the Seams do not stick out.Increased speed
I have a Fortuna. I cut grooves as well. No fortune on the rudders will not replace groove. Not
Work with leather, thread only such use. Braided, waxed thread. Diameters from 0.6 to 1.4 mm. Also want to alter the steering wheel, and as usual, the shoemaker without shoes )))
nick307
Well done! And paint the car himself and the capital. And finally a car Samos to make😂
Can he do my car.
well, if hands grow from one place and from there where you want it why not...or paint and capitalat cars not people?))
Well done! And paint the car himself and the capital. And finally a car Samos to make😂
I do not understand why these troubles if the Chinese can order ready-made and stitched pattern...then just pull the cord any seam you wish to be, and all business
Gosha-igogosha
In the automobile wheel covers for every taste and color!
Cover — very simple and quick method, but it, in my opinion, there is one drawback: as a rule, the cases do not take into account the spokes of the steering wheel and just say, "cut" them. Not very nice, but there is a dispute about taste)
Nicholas, You done it. Prompt, required hauling the helm, possibly with the increased profile, what kind of leather or a substitute of better, smooth and perforated? Better, nicer for the hands and eyes))
Excellent article, caceras study top of question, and found answers to many questions🙃
While reading, as much as I wanted the wheel to drag with thickening :)
Author, success to you, rukastogo people are now the weight of gold
Stanislav-B
only the meaning seam machine for Lam when can be done in the manner of braid: to stitch both edges of the upholstery thread and then hand sew together. longer, but do not need to spend Lam)
probably meant "car for Lam and his stitching on the steering wheel"
only the meaning seam machine for Lam when can be done in the manner of braid: to stitch both edges of the upholstery thread and then hand sew together. longer, but do not need to spend Lam)
Where's the photo of your seam? On it I would like to see how it turned out on the leatherette! I also tried ice! And also on top of the old braid as he went?
Thanks but then I was tormented by doubt comparing with clean skin . In the early cases gave the braid to tone, so I was in the throes of creation, to replace trimmed with a thick leather steering wheel counterpart?
Shurikidze
Question to the master: -can I use for a wheel skin, which is used for shoes? In Shoe workshops this is the direct in one piece (the skin).
take the furniture, she's norms lies)
Question to the master: -can I use for a wheel skin, which is used for shoes? In Shoe workshops this is the direct in one piece (the skin).
How much You have to sheathe Napoi the wheel of a Mitsubishi as in the example? Pure Nappa leather, no perforations.
LRRRClassic
The price of this leather within the available rubles. Buy from dealers and sell all makes no sense, last will remove his pants. Work directly with them and are very happy. She even sewed on the Soviet "Chaika", checked personally, the most important thing is to use threads and needles. That's it... arch is important.
PS. About cormorants, it is a separate Saga, the avaricious pays three times. Quality...it's all quality...
Wrong: the avaricious pays twice. Stupid — three times. And the Loch constantly.
At Honda Vietnam 3кузов what is the price to survive the wheel of the leather (smooth, perforated)? Where are You located? In a personal email.
I have the same seam on the steering wheel and it is very annoying to me. Decided to pull the wheel yourself in the skin. In the process. Stopped on the question: what allowances to make in the junction of the transverse and longitudinal seam.
nick307
Not for money not working. Toffee, lollipops, Chupa Chups
Uncle Col?)))
Kindersurprise take?))
nick307
Dear, read the letters.
I'm not a PR my own work I teach it.
Although apparently useless...
of course it is useless, because every wheel individuality, and the choice of leather is huge, but for three rubles like this one I wrote just wrapped with electrical tape
LSilver
Dear, contradicting yourself.
come on kusatta the steering wheel to alter the skin nasty is from 5 thousand to cool 7
Goods, there is a specific proposal or simply evening is not boring?
Look through my blog. Just for fun
Dear, read the letters.
I'm not a PR my own work I teach it.
Although apparently useless...
In my city, many who sheathes the handlebars than your work better?materials the same
I hope my grandma would understand what was happening,
she's a seamstress))
Thank you!
In Donetsk and pull the steering wheel I understood correctly, and give address and phone number
Skins Deputy, ECO leather, leather ( black textured options 4 types, in smooth 2) the presence of
Nice described, thank you. And it is possible the exact name of the thread or a good photo upakovochki, if possible. Thank you in advance)))
Great advertisement! constantly have to torture people before trusting the master work! But that is the layout of the execution I try to get on the pre-order! And even require a guarantee — this is perhaps an integral part of the deal at slightly higher price! In my experience, master the real easy to "give teeth"! ... or an obvious con man in search of waste vegetable gardens:)... If a person is nervous and is offended even at this stage — run away! :)...
And if you want cheaper there's always pictures and students :)...
Yes, the second part of the response more to the comments to you the first part bold +😉🤘👍