Good overseas! - Toyota Celica, 2.4 L, 1984
And now, after a month of waiting, I received parts from Techno Toy Tuning!
A little later, I will write off directly about the replacement.
In the meantime, we have:
- Camber Plates (T3);
- Weld-on Ground Control Front Coilover Kit (eibach ground control);
- everything is under tight control!
And in this box there was a lever, but about it a little later ...
)))
Many thanks for the help to Tolik (tolikspb)!
I have already agreed on the drawings, they will make the usual + 3d model in the autocad. Then I'll try right away and come to an agreement with the mill-turner. Let's make a copy))) 1 client already exists!
For the benefit of drifting and other autos, I will share the drawings without any problems!
It seems to me that this is an unprecedented opportunity to help all the poor turned on cars (especially novice drifters)). So if you can make drawings, everyone will be grateful. Or you can sell them))). optionally shorter)
I've been thinking about that too. The supports were said to be done without problems, but I was confused by the bearing, which is pressed into them ... in short, it would have turned out to be a rather rough but reliable piece of iron. I can inquire about the price. Coilover whales seem to be able to do the same, but I was not very interested. I got everything for about 18,900, a lot of money for delivery and customs clearance, it can be cheaper if you carry it by sea, but it takes a long time (3 months approx.). I ordered everything here - technotoytuning.com/index2.php Coilover whales can be found cheaper on ebay, there in the region of 30 - 40 ye. And about the drawings - I'll try to help with that!
Do you think it is possible to make camber plates and coilover whales from a milling turner? Here are the drawings ... By the way, how much did they cost with delivery?
Great nishtyaki ...
about the drawings, the idea is good ... can you somehow get a glimpse of it?
My friend makes parts for his two rally cars himself, and such supports are a necessary thing.
I would be grateful and grateful!
Dragonmen of all countries, unite!
Luminium, cast iron ... a joke, while not interested ... I will definitely ask, unsubscribe;)
At the top of the pylon. They can adjust the tilt of the rack for better control. There are 2 types, casters and camper, respectively longitudinal or transverse tilt. The former are more suitable for driving at good speed, the latter are good for drifting.
Next is a coilover kit with reinforced springs. It is needed to adjust the suspension height, in particular to lower it. Something like that )
There is still a lot of interesting hardware ahead ...
Thank you))))) only the drawings of Camber Plates themselves were not found ... ((((It was they who were interested in ...
Oleg, welcome! With the drawings, such a thing came out - www.drive2.ru/users/inf1n...4053239664633492845/#post