New fashionable, full of holes, plastic hood))) - Toyota Sprinter Trueno, 1.6 L, 1997
So, finally, I waited for my hood. I went to the transport company today, took it, and then went to put it.
The installation process took about an hour and a half, because the hood did not want to close. But after several dexterous movements with a grinder, a drill and a couple of light blows with a sledgehammer, the hood still closed.
What we have: a black FRP hood by the spring I plan to cover it with 3D carbon film. The crooked loaders in the transport vehicle made a little mess of it - a corner broke off, about a centimeter, we will restore it in winter.
Subjectively, it seemed that the car really breathes better with him and it reacts more willingly to the gas pedal. But in principle, this feeling always arises when you screw something to it))) Therefore, you should not draw conclusions from this.
While the photos are only from the mobile, I will do normal later.
Well, I xs, when you open it do not you feel? I'm so used to it that when I open the thread of someone's thread, I go nuts :)
About 13 kilos, you Pash exaggerated a little) When I stand in a traffic jam, I see how it works, you can see how hot air comes from the engine)
when you first go into a hot puddle you will see how it really works :)
+ it weighs 13 kilos lighter than the stock one :) weighed it myself
yes, it is better to glue it straight, until the poop in the gap is
neatly stuffed with a syringe with epoxy and clamps for 2 hours, let's skip the current to glue the entire edge over
Yes, they all look like Meyser and D-speed, but they have a drawback that is not in my hood - they do not have air intakes, only heat outlets.
Hello! The hood appears to be a replica of the Meiser S1, only slightly redesigned.
The D-Speed ​​has one heat shield, the Meiser has two, and the hood shape is different.
Combat hood, the engine will be easier when annealing!
I am also looking for where you can dig something like that.
I am PEC. Yes, when I saw how they took it out of the packaging with this one, they just didn’t nailed it, so they could easily break it off when packing it.
by the way, on my own, a piece will be broken off, and in the same place =)
you didn’t pull the railroad by chance?