Appearance changes - Toyota Chaser, 2.5L, 1998
Once I wrote about what I made cilia for myself, I did it, but I didn’t manage to finish the job, because one of the eyelashes broke.
And just the other day I decided to finish what I had started. But again.
I’ll write everything in a word.
We started with car wrapping
Next, we apply fiberglass and apply epaxid:
We wait until everything is dry and take off
we get the following blank:
Well, then everything is like everyone else's - we putty, equalize, primer, paint and this is what happens:
In addition to the eyelashes, I decided to modify the lattice (to walk as they say =))
I was not going to do anything beyond the natural, I just wanted to cut out the middle and insert an aluminum mesh there.
Cut out:
since at the very top of the grille are the main fasteners, it was decided not to touch it, but simply to close it up. But how? I found a way out easily - I just filled it with foam)
Further, according to the same scheme) we
putty
We clean up
We prime
And paint
I stuck the net into the grate, and this is what happened:
It's as simple as that. There are not many final photos, I'll throw it off later.
Special thanks to comrade Sergei for your help! Without it, the end result would not have been smooth and well painted)
originally planned to do just horizontal ... but then something wanted something original.
IliaMarkSib
I don’t want to cut the lattice, I’ll look for this old broken thread, I have long thought of the same topic ...)
on the drome, such grilles are sold for 500 rubles. if you need it)
I don’t want to cut the lattice, I’ll look for this old broken thread, I have long thought of the same topic ...)
Thank you all for your comments! =)
Similar changes are expected, only on another chayzer - from my good friend Skared .