Swap seats Astra J OPC Astra J 5D
What astroved does not dream about big and pure love seats from J OPC? Probably only dead Astrabad. But let's not about bad.
May holidays slowly came to an end and the rest of them I was planning to spend with benefit for health, namely alcohol intoxication. But called Paul Hitchkok and asked me to help pick up seats from the shipping company. Road Nefteyugansk – Surgut – Nefteyugansk flew by, but then I noticed that when loading the trunk was released I was protacal their fashionable garage robe... But it's the little things in life.
As you probably already realized, this entry would not have happened if seats was a pain-it. Here we go.
For a start, had to deal with a safety belt, if anyone knows GTC in he second end of the growing threshold, and the 5D version of the seat, and its growth option 2: cable and lug... GM be the GM...
the cable
Eye is (already disassembled)
In our case, was the eye. The swap began with the passenger seat, so if something was the ability to travel by car.
Removed the seat, disassembled the casing of the rack and started looking for where to transplant the belt. The solution was found relatively quickly – fastening strap through the steel washer was put on the same bolt that holds the seat belt . Previously on the bottom plating made of propyl through which the belt will go to the salon, and the harness is allowed otherwise below the lugs when tightening the harness would be damaged. I must say: the eye is the hardest part in your car, and straighten it or give it any other form, you will not leave. Personally I would bother with a custom mount and the subsequent remaking of the belt under it (like when it looks like from the factory) but Paul said that and so KLO.
Propylene under the belt
The new mounting location
The belt is fastened
Next, the passenger seat stood bolt-it, and inspired by the first victory, we unscrewed the driver's. But there is sorrow, sadness, pain and humiliation hanging over us... Under the driver's seat flaunted the connector from the Chevrolet Cruze...
Counterpart standard plug
Connector seats from the OPC looks like this
According to the readers there is a third type connector (used on Cascada)
Then we realized that hit. But there is nothing, the seat was screwed and tidy strongly suggested to check the airbag. The rear seats rose as expected without alterations. Next was taken the five-day timeout to think it over.
4 days were spent with a shovel with which we dig the Internet up and down in search of the pinouts, and the most important connector in the floor of the driver. Connector was found in a teammate sold in parsing his Astra 5D (Yes, as said above, even in 5D there are 2 version of the connector for the driver's seat), and the Pinout found on the friendly British forum.
Friday night ended at 4 am with the following results:
— It was decided to transplant donor connector in parallel with the standard in case of some sort NEH...
— Pinouts standard connector has not been found, and chevroleta not fit the arrangement of colors and pins
— The block of management of heating of both front seats lives under the driver's seat, and if it is not connected, the ass will freeze the passenger too, not just the driver
Saturday morning was spent with multitester (because the colors of the wiring in the connector seats in the socket floor are not the same. However, the colors of the wires and donor staff contact coincided and after checking, it was decided to combine the colors. Here are a few nuances:
— Red-purple wire remains untapped
For the power of preheating unit answer red grey and black wires with 2.5 mm2 cross-section, their location can be determined by the standard connector for the driver's seat.
The second pair of red-gray and black (mate which is not in regular contact seat) will go to the pump control cylinders of Sedalia/lumbar/back
— Supply current of the heating block is 25-30 And so just stranding here do not go, you have to either crimp sleeve or propagate (we chose the second option as the casings of the desired diameter is not found)
— As mentioned above, the cross section of the power wiring is 2.5 mm2 heated so you will need either a powerful 2-nd soldering iron or soldering station to solder the power section and not to burn the signal (can-bus, terminal strap, harness cushion, etc.)
Here's how it looked in the production process
As mentioned above all connected with the stranding and subsequent propanol and subsequent isolation using heat shrink tubing. Have also recorded the whole harness with electrical tape. The result in my opinion looks very neat.
For greater fidelity (for, where, and how to store seat we didn't it was decided to swapnote the heating control module
Oh yeah I almost forgot, when grandma listened to what we were doing in her yard came to the conclusion that a bit of Voodoo magic can't hurt us
So Pasha, if you're reading this and feel a strange smell, get the amulet from under the seats, I think we can.
After connecting everything worked except the side bolsters back support (perhaps the amulet helped but not completely). We will repair here HERE. Left finally a makeover in the salon, but it will have Paul himself. The result pleases not only the eye, but also the back with sidlesham
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
hi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
gi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
gi can you send me meseg on gmail,[email protected] i neeed you ask something about this seats
tell me please, and really the seats in the Honda accord stuff?))))
there are heated and pillows, and it will be necessary to do so in such seats, they are also left and worked)))), and the slides probably need to be redone...
really it all?
well, if I was doing it I would put 2 questions:
— if the slide and how to modify them gemorno (the Opel front hook rear bolt on each sled)
— how the system reacts to the alien airbags.
then just have to redo: regular heating of these sensors is controlled via can and it will have to be dismantled together with the heating mats to put Honda's.
the hardest part of this swap will fit the sled mount-to-body, heated with the wiring to redo it is really believe. About the pillows may also have to put Honda's if there was, if not much easier. Just say disassembly data sidoh fun thing, referenced in the text
RunWithMe
The saddles look very cool. Epic, I would say. But this crap in their setting are not, in my opinion)
well, IMHO it is better to do this than to tenacity or suffer any garbage ))
vitek8825
My dad would refuse, but he can change a set of regular casting 17радиуса on the same smaller radius-not like him to jump over bumps!
Regular casting 34 diameter? He Bigfoot?
My dad would refuse, but he can change a set of regular casting 17радиуса on the same smaller radius-not like him to jump over bumps!
90% of the color of wires on your and on regular saddles coincide and thus can repeat our path. but better take a picture
The Angry-Engineer
look at photos of native accident is not the same as yours?
the staff I saw, not at all
Nene. there is a heating control module with three connectors in the driver. in the photo you'll see. it was removed. the rest is all in one connector lives
loose a healthy one with pins similar to the standard connector of the current form is not the same, and 3 separately, probably pillow(new poles dismantled) and lumbar support campaign
snickerz
wines of the new seat I do not give, do not find, took the Opel cascada, where the elongated connector like this and 3 next to hang out, I don't have a picture, they're in the garage, I came home upset
look at photos of native accident is not the same as yours?
wines of the new seat I do not give, do not find, took the Opel cascada, where the elongated connector like this and 3 next to hang out, I don't have a picture, they're in the garage, I came home upset
well, take a shovel and dig the Internet. the only way. or looking for a diagnostician/electrician of ML and with 2 VIN (donor and recipient) and a bottle or envelope something go and ask for a Pinout. throw in a personal photo of the connector. what seat bought something and for what?
and where are the schematics to see the connections, I finally finally other plugs on the seat which I bought
SashkaPozdeev
Where these chairs can be ordered?
not easier to put the Sport seat Sparco Pro 2000 FIA Approved 8855-1999 CS 917 98 ?
Dodge-Ram
wouldn't it be easier to put the Sport seat Sparco Pro 2000 FIA Approved 8855-1999 CS 917 98 ?
And why are they in everyday car? ))
so who said anything about prof level? there was only a question of aesthetics and convenience, every day.
The seat itself will not damage Your body where You saw the same pillows? the issue of security on prof level prof solved by the installation of accessories
wouldn't it be easier to put the Sport seat Sparco Pro 2000 FIA Approved 8855-1999 CS 917 98 ?
well, form one)
I know that they are not identical
where such sadly just do not put the factory...
ProWooLF
they are thinner and a rag
same
They are completely different! Variations of these seats a lot, the concept is the same, but for each brand and different car sizes, support, etc. etc.!
ProWooLF
they are thinner and a rag
same
and regulirovki ass and the sidewalls are?
will not work I think
the sled is different
and Clio all adjustments are mechanical (for weight)
but on the Opel Corsa, Astra are they electric
by the way, our electricians also without for 100ку sell))
The Angry-Engineer
with the same? you will not find. design under the copyright of Opel
they are thinner and a rag
same
YuryDSM
Firm seats MOMO accidentally?
Recaro. Only on some versions (like pictured) put the Recaro lettering, and some OPC (Germany) or VXR (UK). Recaro seats, OPC certified independent experts of the medical Association of the health issues behind AGR (Aktion Gesunder Rücken e.V., Germany).
Mazix9
NO, agr gm
AGR (Aktion Gesunder Rücken e.V.) is a medical Association for the health of the back, not the firm seats.
I set from right-handers. in the course of this error. raspoznovanie seats have 2 seats or just the passenger?
no nothing. everything is working normally. but unit climate spread to every native
hi . you have some errors and mistakes AirBag sensor seats? do I need to program ( sew?) seat?
