Carbon 3D - Toyota Celica, 1.8 L, 2001

Thank you ...

contact

When I get ready, I will consult ...

Everything comes with experience, the first car that was made did not work out the first time. Celica turned out pretty quickly and without problems. And of course it is of high quality ...

Try it, everything is real

Is it difficult?

yes, yourself. I just do vinyl, carbon

Did you glue it yourself?

=) yeah, what are you ... just Celica =)

Good morning to you…

Too much honor :)
Hello :)

TheFaceballs

Oh, cool, looked at the first photo ... well, damn SL!

I would even say SLR ...

=) thanks

Oh, cool, looked at the first photo ... well, damn SL!

thanks =)

eh beauty hold 5+!

thanks! glad I liked it =)

Awesome, Dim)
catch 5)

you need to take into account the quality of the film and its properties. different film stretches in different ways and glues too ... some kind of easily glues to any curved surfaces ... but in general, a hairdryer in your hands and forward =) when heated, it takes the desired shape

Well done, well done!
I myself am thinking about pasting some parts in the cabin. Briefly tell us about the technology and what pitfalls you need to consider?
Thanks in advance!

there are a lot of things in the internet + there are videos on gluing. Look there, it becomes clearer and clearer =)

and just take more material, you will practice for one =)

I understand, I myself have not worked with such films, so I am gathering information that there were fewer jambs.
I'll look in the depths of the Internet for what and how!)

unsubscribed

but can you tell in a personal where there is what to look for?
I understand with ebay? I want the same for myself, just for the sake of controlling the oil level

everything is stuck =)

I pulled the sensors from America, they were cheap =) yes, pressure on the left, voltage in the center, and on the right is the temperature of the oil, not the coolant. connected through an adapter that is screwed under the oil filter. I am waiting for his arrival, while the sensors are simply installed in place ...

awesome! I wanted it so myself, but they said that 3d would not stick, I want a hammer
damn it too)

Can you tell me more about the sensors? where did you get it and how much? how do they connect? I correctly understood that oil pressure on the left, cooling rate on the right, and voltage in the middle?

thanks =)

Excellent result! Hands where you need it.

Yes, I pasted it myself, I'm doing it. Pts technology is described in detail on the Internet, you can read it there ... try it, everything is real =) in addition you need a sharp knife, an industrial hair dryer for heating - so that the film takes shape

Thanks for the information. Did you paste it yourself? If YES, what are their features? Where do you need to start and what do you need to have beside the film?

Hello! yes, this is a 3D carbon film. bought over the Internet in Moscow. Cost - around 3 tr. per meter. And how much you need, see for yourself ... Better take more, you never know ... suddenly there will be jambs.

Hey. I didn’t understand a little bit about carbon! Is this a 3D carbon film or how? I am interested in this topic myself. And in general you do not know what 3D you can buy that would be enough for the center console, etc.?

do it! I'm waiting for a photo report =)

I was convinced that it is beautiful, I will do it myself :)

Ask me if there's any need

I need to do this in the summer, I don’t know with a prom hairdryer, but I’ll try
as usual during production I’ll consult with you))

Thank you so much

looks good ) ) )

it is necessary of course, because after the film has cooled down, it will decrease slightly in size ... 1 cm is enough

And how much (and is it even necessary) to bend inward?

I can't see how the watch area is covered. Stretched out to its full depth in hours or from several pieces?