Exhaust System - Toyota Celica, 3.0L, 1984

Well, that's great! I hope everything will turn out well for you and there will be no more difficult and ugly situations. And you will please us with interesting projects)

Supra finished recently-gradually spread! and so I do two jobs now! one just kicks happy, soon I'll start spreading it too!

Yes ... Hi, Valera. for a long time something you have not seen with projects.

em for sure!) without stirring nowhere!

don't forget about money))) without them even a piece of pipe with electrodes no one will give.

good when you have 1 - garage, 2 - tool, 3 - straight arms

I just really wanted to try to do it all with my own hands. Learning))

very confused

not yet ((but there are plans)))
Right now it's cold, I don't often start, warm up and roll back from the garage. not to shoot something yet))

wait, it seems tough to me :) quite forward flow ... is there a flame arrester?

one of these days I will definitely do it)))))

Is there a video with sound?

I will try to repeat this business! The other day I lost the catalyst, and the flame suppressor did not have time to stick it in yet)) Sounds however.

Well, a flute so that it would not be so loud. it is removable.

6 meters of pipe cost 3tyr or so to mine.

The flute must be removed from the can, because the outlet is very small, because then there is no sense at all from the forward flow ... But in general, 5 is great!

Are stainless steel pipes expensive?

Good luck!

Class! Respect! I will also do such a release on Crown ...

So with this then the problem is damn it, I here cooked a piece of iron with a wall of 2.5 mm and melted that one for good health, I must be familiar, apparently)) thanks again for the info!

without argon, there are special electrodes, rubles for 300 pa 15 pieces like. current is about 80A. well, look there yourself so as not to burn a thin-walled pipe

stupidly simple swab? at what current? without any argon? )

I looked and got to bortovik)))) Yes, no question. I took electrodes in Leroy Merlin, where they were sold for welding stainless steel, thin, two. well, then you cook them like ordinary ones.

Hi, great idea and implementation, can you tell me about electrodes and welding process?

Informative Artem, useful to any lover of kupeshek =))))

I'll try. Thanks!

yes, it was a hundred years ago ... they just had cuttings from some order. and in Samara it was. I think where they cut with a laser there should be a different material, ask where they cut.

Are there no coordinates left? Or was it a one-time promotion? :)

the guys where they cut had pieces of stainless steel for this.

Can you please tell me where the flanges were made? As I understand it, this is laser cutting, cutting is certainly not a problem to find. But I don’t know where to get a small piece of steel of the required grade.