DONE :) NOW WE ARE GROWING! - Toyota Corolla, 1.8 L, 2003

damn what with the sound I have :(

vkontakte.ru/video.php?ac...id=13600309&uploaded=true the
link from the contact there is definitely a sound! :)

I didn't even figure it out there :) :)
I'll try again ...

yes there are jambs ... try to upload to YouTube :)

Thank you :)
I like it and a couple of friends have also listened to them saying that ice!
why I have a video with such sound, I can't understand how :(

not bad :) 5!

yes, let's see :)
now we plan to change the wheels, buy 16 rollers by the summer. and if a spider turns up at a good price, you could buy it too :)
in Moscow, how with such devices?
tense?

I'm not saying that you need to quickly drain money on such or a similar device! )

I just can't spend such amounts on such things ...
I'm not a millionaire :)

You can search for B U, the price is half less, but it will take more time.
And the price corresponds to the firm, as with Mugen at Honda. =)

excuse me, but 40,000 for this ...
no :)
this is not a little car to put such things on it, well, or I'm just not ready for such things ...
for 40,000 you can find a more successful application :)

In general, 40,000 rubles, by the way, I think it should come up, since the layout of the unit is identical) It remains to collect the required amount)
Although, it seems to me it is worth thinking about which offices there are still, it may be cheaper to find it.

1200 of what?

TRD has a collector for 1zz-fe, although for the MRS model and the cost is about 1200, the design is very advantageous, 4-2-1!

uh ... trd? :)

What offices are preparing Toyota for racing?

if everything is as simple as a vaz :) :)

So what's the deal?! Go ahead and search! eight)

yes, the same with the filter :)
but I would buy a spider ...

Heh heh - is your club muddied up with filters? =)
A good collector can be found at the office that has been preparing cars of the same brand for all types of racing for many years. A well-made device works well from 1500 to the very top. With a smooth increase in power and torque!

I changed the cut, the filter is new, but soon it will be in the regular one :)
and the spider is a whole problem and as 1 special told me it is not worth it for this machine since the spider works in certain ranges of revolution ...?

You need to find a good collector, then the machine will cheer up, fortunately, there is already a bank :) Change the candles, the filter is correct ...)

:) ok :)
I'm so ... I want to cheer her up

In my opinion, the cat-neutralizer should be removed in two cases: 1-car spends 80% of its operation time in races, 2-standard cat-no. hammered to the impossible and his death came. In general, the elimination of a normally functioning cat. will give an increase of about 3-4 kW and a torque of about the same.
And we will not blame the state ... we must be responsible for our actions ... sorry for the poetic :)

you know, our state with its factories would better take care of the environment ...
well, in fact, a car in Russia for half a year, mileage 50,000 (99% that is native), the driving style is different but I like to drive and in the summer the afterburner, idle :) :)
92benz ...

I will not talk about what to clean or not to clean!
Just ask yourself a few questions: Why, what in the end, but what about the children, and the trees and animals, how old is the car, what driving style, what kind of fuels and lubricants do you use ...
Option two: take off and look at the lumen, assess the general condition of the insides ...
Draw conclusions ...)

ideally :)
I want to get to the catalezator ...

why in the Corolla forward flow? :) :) :)

In principle, as in any car, to improve the exhaust gas current!
Ideally, when the middle part is of a larger cross-section and with minimal curvatures ...

I want the sound to be beautiful and at least a little easier to breathe

why in the Corolla forward flow? :) :) :)

beautiful sound

everyone liked it except of course the parents :) :) :)
you and I went for a ride normally :)

The sound is nice!

everything is ready :) it
works

re-upload video

no problem!
cooked gozom like everything is clear

solid 5!
then take a photo at the welding place

sweat by the same theme, under the pictures at the end! :)

what time did it get up?

with installation!
I want, but not just cut out, but instead put a flame arrester

is it with the installation? do you want to cut the catalyst?

thank you :)
nice bass, just kicks now :)

5-ku for forward flow) Growling crown))

I want the same class now =)
after the previous car, having changed to the Corolla, I always wanted to return the old bass sound =)

everything fit only a tube of 20 cm was welded in length. the sound is normal, with my sister, mom and an employee drove everything said not loudly in the cabin, but if you go exactly, then almost a drain and then gazanesh is ice :)

By the way, did you just put the jar? It turns out on your own goose?
I got confused by this business in the spring, but the couple's hands were slowed down by the ancestors, too, in my previous 2112 they could not ride with me =))))
but your report made me think again =))))

I even did not quite understand about the gander ...
listen, they cut off the drain barrel almost to the very tomatoes :)
then we measured the forward flow and the length of the pipe was not enough about 20cm and that's all ...
but the "gander" if I understood correctly is where the knee is movable, right?
stayed in its place, see 6foto after the video there you can see this knee

and the type to goose for the length of the navarliya chtol?
well, by the sound of smarah what can =)
my friend stood outwardly the same, but no one could ride with him and he threw it out in the end, and I’m normal =) by the
way on the flame arrester? roofing felts in general 3 and type can some problems arise = (((

nope, I do not respect anything except round! :)
but on each side it is generally cool!

Well, yes, yes, it turns out that the native goose was left with a shortage of current =)
kada on 2112 put the same thing =) also welded 20 centimeters, a tube from ZIL =)
it turned out super, respect =) I currently want an oval output =)

thanks, glad you liked it :)

not like a cheap nine!
I like vopschem =)
well done!

oh yes :)
he is satisfied himself, normal sound and does not yell like TrAKToRrRrRrR

nicho so! cool ass =)

it's just an old topic, so you can't put it, it's already closed for ratings: (
yes, the spider is very difficult to find ...

For some reason I cannot put an estimate. Apparently uzho put it :)) So I meant to stick the sports wheel. Unfortunately, there is no spider on mine yet!

Thank you :)
I don’t want anything else yet, the bank will be that way, but the spider and the spider would gladly change

It turned out cool. My sound is about the same. True, I decided not to stop and put the sports center. And for the work done5!

WRITTEN AFTER THE VIDEO!

thanks

almost :)
it should not exceed 96DtsBel like so, and if there is a certificate, then everything is cool

And as I understand it, if the forward flow is certified, then the inspection can be passed without problems?

yes, if not loud, then what are the problems :)
mustache gud

well, great. I'm taking myself a tanabe hyper medalion, I think there shouldn't be any problems.

butUproblems :)
passed, everything is ok, asked to "pitch", listened that it was not loud and that's it. especially since there is a certificate

but what about the passage of MOT, have you already passed? there is a problem?)

how much does Glushak cost and where did he order