The Fireball project: correct and powerful diode PTF
I think that "American" Morimoto xbLed known to many.
In quotes because they are made, as you can guess, not in America :)
Morimoto just layback that mold on the box.
For fun I ordered a Chinese counterpart. Cost about 6 800R.
Three days ago was 7 300. Sometimes laziness allows you to carve out a couple of hundred :)
There is reason to believe that the STG they have a good and they are quite a will be "working" as an additional middle. Of our also someone put.
I'm curious to buy the Chinese version (although you can "original" Moriaty to take, they are not much more expensive) for them, I'm sure there are Cree chips, and the "Morimoto" — Phillips.
The idea of the experiment is simple:
These PTF in run-off should produce about 6 watts of light.
So a figure, although in the presence of STG it might be nice to highlight near.
Morimori issue 9 watt.
I will analyze these lanterns throw in the stump, surplus diodes and stick there Cree XP-L. the value they have 10 Watts per piece, total 30. But I think that the "working" version will be 2/3 of the nominal value, i.e. about 6-7 watts, while maintaining a STG one bulb should give around 20 Watts.
Taking into account the loss on the curtain in xenon (35 Watt) lens it should give the same amount of light as xenon, but in a very narrow beam.
Well spermahungrige driver.
He is already in the current lamps in tomance, so that left only the algorithms work to come up with.
In General, should be cool and exclusive :)
Our page on DRIVE2:
High Performance Lights Automotive lighting system 50 verified reviews See prices, photos and contactsUmmm...I don't even know how to respond.
There is a phrase in the text:
"I will disassemble this lantern, throw in the stump, surplus diodes and stick there Cree XP-L."
The guts there are the most common.
If you succeed, then I think I know what I want next time :D and so very interesting, I!
PTF only H8/11, kit no lights, I think every easily, and he will buy) in short, to even think about it before. Come, we will see)
Well, if there is a "total cost", it is likely just a "kit" for installation. I already own the exact lanterns pick will not )))
It is also interesting. I would like to see and compare Your modified standard (prior to opening)
Wait for the falling exchange rate and order))) If you do not fall, it means not destiny))))
High Performance Lights
Max, why not just a second pair to take?)) Even if replacing the diodes will not work, it should Shine ) but then you can GroupBy to stir up the Chinese I know how to sell )
SchA know their
High Performance Lights
Max, why not just a second pair to take?)) Even if replacing the diodes will not work, it should Shine ) but then you can GroupBy to stir up the Chinese I know how to sell )
On grubby I subscribe )
Well, Yes. I wonder what was shining and it was possible to use instead of standard xenon when driving in the city.
Max, why not just a second pair to take?)) Even if replacing the diodes will not work, it should Shine ) but then you can GroupBy to stir up the Chinese I know how to sell )
Earrings you know all)))
How would I piece of work it is necessary)
I am sure all will be fun)
Evgeny242
Interesting PTF!
Decided to find them, but on request led fog lamp some corn across such did not meet...
days will come and do a review
then will follow the events, an interesting alternative to the PTF and different light bulbs
Interesting PTF!
Decided to find them, but on request led fog lamp some corn across such did not meet...
Plant Esuse Taiwan.
www.esuse.com.tw/en/produ...evel1_id=49&level2_id=188
Interesting idea, would love to see. Moreover, recently got my kit original Morimoto. Honestly don't know where, but bought in America. cost a little less than 10 000 rubles with delivery until you put.
timenergo
www.caroptics.ru/mitsubishi_outlander_12.html here for 3770р for experiments at the time, a week will I have it on good authority that a very good Shine
Interested in the mount Out XL fit?!
High Performance Lights
Well, write how will have you can my faster from China will fly)
OK I will write
Yes, it seems that it's the same :)) Curious, thanks for the info. The price is ridiculous. But PTS looks like. The same price tag, just at the old rate.
High Performance Lights
Well, first task is to take the most cheap was not.
At the same Ali was and 4 thousand but I did not dare.
And secondly, I Choate't seen DLAA "such a plan". Is there a link?
There were some options with two old XP-G or even XP-C in the center, but it's about nothing, seen even in the photo.
www.caroptics.ru/mitsubishi_outlander_12.html here for 3770р for experiments at the time, a week will I have it on good authority that a very good Shine
Well, first task is to take the most cheap was not.
At the same Ali was and 4 thousand but I did not dare.
And secondly, I Choate't seen DLAA "such a plan". Is there a link?
There were some options with two old XP-G or even XP-C in the center, but it's about nothing, seen even in the photo.
Well, it is also going to watch, Earrings when there are many people who want, I am also in gruppe.
Well you actually used itching ) there are many options, so it's possible that there is a need
Little, I have a 123mm. But the selection of bulbs will have to come back to you. Planned maximum digitaria...
Yeah, there are 115mm! This is better.
Mdaaa.the right to these on our roads more and to live became easier.all the best and success in
Lens it is spherical, there's nothing else. Well the reflector piece
And You can detail to show the device? Interested in how this band of light is obtained?
Then, too, Valeo and koito. Your answer is not the topic, because the question was about something else.
Even so? Well, You will not argue, neither one nor the other in the hands not kept.
Nicho, let's see if the experiment. These tomance not going anywhere.
They, like, they're already gone, Max.
There above is a link to 3,700 people gave.
And, in this respect,... the Design of the thing, but about the versatility I agree :)
No, not trash, but there reflector + design I don't love. Spherical lens cooler in my opinion and more versatile
Well, I had never heard about autodistribute and 101е wanted to buy a year ago, but she came. And the glory of God.
They sunk into my head, because autodistribute sells them and float them in the case and no case )))
About OSRAM three times already wrote, this is the fourth. apparently it's a tradition.
And then there are the OSRAM diode tumani )))
But honestly I wonder what these inside :)
Phantom-258G
Got somehow into the hands of
s24.postimg.org/59kcuzidx/1led.jpg,
s24.postimg.org/f85bhgrth/1led1.jpg
The enemies sounded the price Tag is unreal, decided to do without them.)
are seen as the tuning for wrangler
Got somehow into the hands of
s24.postimg.org/59kcuzidx/1led.jpg,
s24.postimg.org/f85bhgrth/1led1.jpg
The enemies sounded the price Tag is unreal, decided to do without them.)
Thanks, mine too.
Driver nothing happens, povilika on the family stress works nasty. Any. Stick 5 chips and will be better. At the got 14.2, 14.6 поэтом3 to "pull" ineffective
Sergei, once touched on the replacement of the diodes in a regular diode optics.
www.hidplanet.ru/forum/vi...f=7&t=5022&p=60389#p60389
This unit has a chance to change the diodes to something more energy efficient?
there is a diode powered 1.17 And at 14.8 V (obtained 17W), while heated to 55℃.
PS the fog lights also ordered the Burg at the link above, only with a slanting glass. On the track in Moscow tomorrow, probably get.
Can give for temporary use for experiments to You, Sergey, if the Chinese are in no hurry. Still he will only remake the beaten track.
Well, heat in this case will be 20 minutes only. So there is a good supply. I have DXO 7 watts, PTC to do 15 at least. Chips there what? Thanks for the info, my even in the track is not yet lit...
Got their yesterday.
complete harness with relay and button.
the driver inside the spotlights.
Test: fed from 12.1 In
when connected with 2 lights — current 1A. Total: 6 watts per lamp.
when 1 headlight is connected, the current is 0.7 A.
Shine white light. Heat — barely noticeable.
Well, if not broke, then it will be. Chips usually through dinso even. And the curve with such photo will be clear. I think there is still Epistar
The chips are not visible, but can disassemble the glass on Hermetica and latch it seems
xim737
Pictures are not mine, but I have the same, only with beveled glass and ordered the same.
www.hidplanet.ru/forum/vi...=7&t=5099&start=45#p51558
It is clear that for the diodes? Me unfortunately no(
In the post about the Chinese lamp 50 watt ori same
Pictures are not mine, but I have the same, only with beveled glass and ordered the same.
www.hidplanet.ru/forum/vi...=7&t=5099&start=45#p51558
It is clear that for the diodes? Me unfortunately no(
It makes no sense — the signal goes over CAN.
He needs to be caught, and then the wire from the cabin to manage.
To fence is stupid, frankly, simply stupid for the turn signal.
To start, just need to do normal light.
By the way, I looked at the phone, right now, on the laptop.
It seems that there XT-E worth. Well, judging by the color.
Maybe unnecessary)
Really would like to unreleased backlight rotate from the position sensor signal wheel