Tail lights MUSTANG GT500 (continue).

In this case, not only are RGB.

Well, I thought so too, but the conclusions of the diodes a lot, seemed to RGB

Another question — why under the red glass RGB?

96 diodes :-) Rgb 5050?

Zhdems! :)

All the time ))

And I began to worry...how so, where fonariki mustangsqa? )))

Soon

Beauty
Waiting for the continuation

"We atomic bomb scare hardly - we are the Ravers in the life of this kind..." ))))

Especially after Leningrad ))

About the Boobs you always )))

About Boobs not aloud cattle has not become )))

And Boobs?))

Titek does not exist, is a myth! )))))

Another teaser-slanovskiy for the needy))) And th Boobs no? )))

Try )

As usual above all praise)) Everything is neat and beautiful))

"Golden words".

Do not feel ashamed, we should all show ))

Beautiful! Factory Board sekas! Quite interesting thing will turn out, considering that each chain Svetikov its leg of the driver. Wanted their new home, the led lamp with the control unused button on the remote control to show, but now as it is a shame such a disgrace to show=)

Aleks-mo

the Board was done at the factory? the installation apparently too automatic?

Only Board factory

It is important that b was reliably.

Oh well, all is worthy :)

Some manual )) Left heel in a hurry ))

Judging by the photo — installation manual :)

the Board was done at the factory? the installation apparently too automatic?

If so, is it a conspiracy of car manufacturers!
Because manufacturers something different...
Although I don't mind. I work more.

Maybe, we can only guess.

I believe this was a DELIBERATE joint. To earn more and on the secondary.
Because it's not only GL, but ML and Eldorado and Eski.
Well, Audi all.
But BMW brought the turn signals, burned yellow with 3W diodes.
Lexus diode in PTF burnt too, 3 watts.
All have photos if interested...
Simply astounding is the fact that ALL diodes OSRAM!

So the factory school. Or during the build or of the LEDs themselves. If you do not exceed the parameters and obviously normal LEDs, they work almost forever. The car will rot.

Of course not. Native the factory lights.
I meet very often... just because they are engaged in repair...
Here is an example. From TWO diodes in a single native GL lamp...
www.imagebam.com/image/a33b06399808975

Brand OSRAM diodes? I hope it is not those who shove light bulbs instead of the car owners or to sell?
Never met with burnt branded modules in the Benzes and Audis.

If this were so, then branded diodes OSRAM had not departed in batches in a virtually new car...
I'm on the Benzes and Audis.
A paradoxical situation, brand diodes + lots of electronics and still massively burn out.

So so "branded". No self-respecting automaker would not put outright and get a cheap hack, which will burn just like that for no apparent reason.

Honestly I don't understand it, hence the question — just see cars with burnt LEDами as "the farm" and with signature DRLs.

If done properly, and are not in acid — I think that is almost eternal. And why are they suddenly have to be unreliable?

Maxim, without long and persistent reading forums such as Board and selected LEDs reliable?

Well, it's too much ))

A work of art and not the lights :)

Wow!

cool

well, not destiny. )))

hmm... to look at the authorship of the video and read the caption to it it is visible not destiny. well, okay, not all of us experienced

I hope the video is not the result of the work? and the right Blinker only on two sections mogreet, and the left on all three.

Coming soon )

Waiting waiting waiting!)))

Be careful, and then you from his mouth smells

Shuffle

Nothing happens.
Just do not recognize, then juicy red diffuser, and switching the colors do not recognize. Then, they are the deer, that would not look at the indicator.

Are you a deer, just do not adhere to the requirements of the SDA.

It's up to )

Well, it is necessary to look in General, the situation on the road, not the turn signal =)
Stop it in Africa and Stop, burning both and not faded out. The turn signal flashes. It's hard not to recognize. Zhto or need to fly in the stream, playing checkers, or to get used, reconstructed on the fly. In any case, no one is immune, but to engage in Masturbation with colored LEDs under the red reflector not a solution.

Yes. I'm here to caliber a little ass did not come. Thought he pressed stop, and it was a red turn signal... Used that they usually have norms lights. Well, the owner of REM — not only JIP, is with what to compare.

Nothing happens.
Just do not recognize, then juicy red diffuser, and switching the colors do not recognize. Then, they are the deer, that would not look at the indicator.

The experience of the owner of the American car, the red indicator is often not recognized. Therefore, if you have such opportunities, it is better to do two-color diodes on the turn signal to do switchback to yellow. IMHO.

Also I think )))

Always admired the monumental American muscle!
I think the final result will be worthy of respect;)

varnish shed you need when it's all soldered together with diodes? great job.

plan

great result as always! varnish to cover the cost of not planning? to run forever?

Shuffle

Well, except that someone will make the lenses with the orange insert. Will take? No? Well, I never knew that the chatter alone.

and the option to play with the led color to red using the lens, get something like the orange color, or not an option?)))) The execution is perfect!

Critics have always excess

It is not necessary to be a cook to understand that the soup is not tasty.

In fairness, beginning to show her something.

Shuffle

It is now conversation or it.
First look at the car. Read carefully... then Maybe ripe the idea that the owner is not the boy of 16 years and ordered genuine parts from the States that would then hang the curves of the homemade diffusers, and even then "inside colour film"... Similar machine on the object to install the farm-tungamah lenses?

In fairness, the machine is not similar to the object to install custom led optics. Now you are doing exactly the same farm, opposed by, so that superfluous stroke still would not spoil this amateurish mess.

I just do not understand the part about "kettles" and assaults on other people's red lights are absolutely not in the address. Or kettles now are gone?
And before that you don't care about my crown, I also do not care. It's in the brain it is present, not me )))

We see you've forgotten the time when we were "kettle" in electronics... And to your crown I don't care .

You my crown prevents? )) So don't look. Go to where you are comfortable.

Vaskrol

You hurt someone? I'm trying to communicate with you, and so you react aggressively.

The guy is just a little arrogant ;-)

I benevolence ))
I'm impossible to offend, and get just immediately go to the foot erotic. Just stating facts that I see. Just not everyone like it, including you.

You hurt someone? I'm trying to communicate with you, and so you react aggressively.

Well, fine that you finally indicated that you are not interested in everything else except the +1 to the comment of a comrade below.

No, that's not it. Now I do not care how they are made. You said yourself that someone showed the lens with the orange insert? Therefore, you still know how they are made, and, if necessary, it is still possible to implement. Clear, certain, expensive, but you could just tell me about it, once you know.

I told you, I only left my +1 to the review companion below that red diffuses uncomfortable.

However, I am confident that with the help of a milling machine and acrylic (two colors, red and transparent) will have quite a decent lens, because I worked with these materials and with the milling. Light a wedge on the same film together, but you can consider all the options, it is foolish to condemn something on the move.

The fact that you probably have a vague idea of how to make custom normal lenses. That would not farm, and really normal.

Hmm, the optics in the form of a simple matrix of LEDs, as nine of us like to put — is the equal of "original spare parts from the States", and custom lenses in a single instance — a farm? I understand what you want to say. Actually, I needed to hear only one thing: alcohol turns the owner did not soar.

It is now conversation or it.
First look at the car. Read carefully... then Maybe ripe the idea that the owner is not the boy of 16 years and ordered genuine parts from the States that would then hang the curves of the homemade diffusers, and even then "inside colour film"... Similar machine on the object to install the farm-tungamah lenses?

I think you can just calmly respond to the person that is very difficult to find, not ernichat. The conversation will be shorter.

I only confirmed the words of the person who posted below that it is unsafe for the owner and uncomfortable for others. And the USA is the only more than two hundred countries, which goes.

And so — I can see 2 ways to make such lens: 3D printing (expensive) and simple milling from 25mm acrylic (cheaper).

Great answer, I think )))))
You are sure not to Viburnum offer to find the lenses?

Shuffle

Well, except that someone will make the lenses with the orange insert. Will take? No? Well, I never knew that the chatter alone.

And it's easier to find a transparent lens, and if you don't like the transparency, use the inside of the color film.

They slow down then left, then right side I think. Evenly so click "jerky" on the brake =))

Shuffle

Yes, it's not logic, it is experience.
All Americans goes on for decades and they see everything, and suddenly "can't see anything, need orange." Well, when you show me a GT500 diffuser from 67го year orange color, and then it will carry on a conversation. But first look, I'll wait )))

It's very simple.Is the SDA.Standing in front Dodge Caravan turns left.And will not understand, roofing felts it intermittently brakes, roofing felts it turns.Pendosov let him ride the way she wants.

)))) right in the bull's-eye ))

Yes, it's not logic, it is experience.
All Americans goes on for decades and they see everything, and suddenly "can't see anything, need orange." Well, when you show me a GT500 diffuser from 67го year orange color, and then it will carry on a conversation. But first look, I'll wait )))

What a strange logic? You do not need to criticize and Express their opinion?

Well, except that someone will make the lenses with the orange insert. Will take? No? Well, I never knew that the chatter alone.

Confirm that the red turn signals you can't see anything, so vote for the appearance of orange stripes, if the project will be repeated in the future.

I believe that you are violating several requirements of the law make changes to the design of the car, not provided by manufacturer, and in executing the same, such work does not take into account the traffic rules of the Russian Federation.

By law, if this model is discontinued.

+1 the lawyers Fig

Say goodbye to immediately.

I believe that you are violating several requirements of the law make changes to the design of the car, not provided by manufacturer, and in executing the same, such work does not take into account the traffic rules of the Russian Federation.