Upgrading headlight Eagle Eyes

thank you my friend)

You as always is cool!

AAA) 220ω

I'm talking about the shade))

I didn't put in at all

Grey, and how much load resistor set?

OK thanks

Between the led and the core of a thermally conductive adhesive and outside epoxy

Welcome do not tell how you connected the LEDs with the rod

Soon I arrive at the bottom and be sure to drop in )

Sergei! When your hands get to my headlights?!))
Class!

Thank you so much )

Now, as it should))

)look for a new job.your brushes)

why not)))

From the heart) then we think that nito would do also)

professional!I recommend to all!))Very good man thank you)))Photo lights interior led strip off your Board then.Unreal shines brightly.Spotlight live!))

)))))

this is what I have thought already then. But since used them for the first time, I did not risk) In the future I'll be smarter))

Well, Yes, actually ))) Why not use one driver for the current to 900mA (for example)

With these drivers I encountered for the first time and did similar. The 1W LEDs and the driver respectively 3х1W on a chain of 3 Svetikov. You mean why not connect through the driver 3х3W?

Standard drivers for РТ4115, CL6807, ZXLD1360 one of these chips, the driver you have... they all have access to ADJ brightness control... And after all: why 4 driver to the lamp (well, a maximum — 2)? In General, the use of al.terminals for heat dissipation and mounting the LEDs directly to the terminals — the perfect solution in terms of the lack of space for the location of radiators in the spotlight...

Interference is not detected. Driver standard! 3х1w, that among these drivers is the chip which has the function of primocane diodes when applying for one leg of the supply.

Hi! As with noise from 8 drivers in the FM range? The drivers were modified? Why use a number of drivers on one headlight: as many as 4 piece? Why not one driver for all 12 PCs LEDs?

Stra)

A serious approach!

dectane and more can be found on ss-tuning.com

))) thank you

Handy)!

space would not be enough.inside the lights are all back to back

These photos look good. Maybe worth to hold on them a little bit higher?

well, Yes.

Here such?
www.caranddriverthef1.com...agen/VW-Tiguan-R-Line.jpg

well, in the Passat the same thing)and the Tiguan and the Touareg.

Made sure high quality and right look like that from the factory. However, this style in my opinion does not match the car and looks at least strange :)

I do not know much about lenses )

KMK cost already lens to send it back. because she Dectane Mr.)

Looks great! Will be able to implement Such an option on the Passat CC?

ahhh.but I would put, I think that will burn out. but this is purely my opinion)

the fact of the matter is that they will not at all . they will be installed in a very small place directly in the mask close to the glass.

So I will measure the temperature . If you will be close to 80 degrees it will be messy

I think sites like under 1W will be enough

well, I think appropriate for me . In Pai of difficulty should be about 1.8 amps.
Mykruha designed for 5 And with that of the radiator 3 And

Right now collect one gerlando and I will try. The diode nagrevayetsya 60 degrees.

At full load the stub with the radiator very hot ?

Yes, but from a ready www.drive2.ru/c/2024733/

And stab homemade?

Yes less. Much less

They are smaller to bask needs

Not. All as before DRL and envelope but 5730 . + linzochki

Envelope turn ?

Right now, typed nadhnennya and go to finish.

watch)

Soon to be another implementation.

Otoh, I think really in DRL Foltz piranhas))

No, not the original.

I understand the headlights are not original?