Diodes in the rear reflectors. And down with the red filter from the left headlight)))) - Toyota Corolla, 1.6 liter, 2008
found an interesting device on ebay!
Diodes in reflectors on the rear bumper! I thought to buy ... But then she came ... Well, you know her! Toad! And she began to choke)))
It was decided to do it myself. Moreover, I have already seen how it is done ...
Issue price:
35 UAH)))
In the reflector, 12 LEDs were installed in series. The new headlight was connected in parallel with the side light bulb.
All wires are laid in a corrugation (corrugation as a factory one) The connector is soldered to the lamp. In short, everything is in the best traditions))))
PS The mortality looks alive! The photo is not entirely clear ...
... but I almost forgot! The filter was also removed from the left headlight (fog). Now I have symmetry!
Thanks to 017 for the idea!
www.drive2.ru/cars/toyota/corolla/corolla/017/
Dimon, so I told you how it is done) This is how it is ... I put fives) Only you can stir up the diodes more often))
Darius-ptz
connected in parallel to the size lamps)
Shine brightly! Very bright. Now I think I’ll hang up the resistance, so I can dim it a little!
LLIRIK
yes, I generally wanted 16 pieces. put, but there is not enough space ... and stiffeners on the back of the reflector! In general, this business is troublesome ... But everything is possible ...)))
toyota753nnov
yes no everything is fine! These are diodes ... there are small heat emissions ...
And inside the reflector itself there is a void)
It turned out great, but I just can't get my hands on transforming the rear reflectors into foglights. So far, only time was found for the front. Well, nothing, I'm going on vacation! .. :-)
thanks) I
will soon make some electrical changes and unsubscribe! otherwise the pulses are caught by diodes! )
nuuu! "It all depends on the straightness of the hands) But it's not difficult at all! It's harder to bring your mind up ...
glow angle 160 degrees.
color: red
supply voltage: 2.2-2.5V (don't remember exactly)
Hello dear! Did you drill or burn holes for diodes? Did you put the diodes to the kata fotu on glue or just put it in? THANKS!
It turned out great, I looked at the people - you have a better option, I will do as you do, thanks for the idea. And what if we run six about the inner one - close to the bolt - it will be possible to lower the voltage without resistance and the inner circle will appear - it should be cool. Sorry I chose the limit with estimates for the day ...
that yes, this is probably a disease, a car and a loving owner, I love mine myself :)
Hi Artem, here I am, having finalized your version as well, I finally did it for myself. I apologize for not mentioning your name in the report, I forgot who I saw, right now I just came across and remembered. Thanks for the idea.