The quieter you drive - the more fun! - Toyota Avensis, 2.0 L, 2001
The quieter you drive - more fun or soundproofing the floor! Almost the last stage of Shumkov.
So, what I want to tell you) It's not as difficult as it gets hot)
Dismantling:
- after all the seats and carpet were dismantled, we realized that not everything is as simple as we would like.
- having seen the thickness of the "native" sound insulation, the thought flashed that there would be no sense from our STP + SPLEN, but it still exists.
- Skillful Japs so securely attached the "native" Shumka that it was practically impossible to make noise in front, but somehow it turned out) It could have been done normally) but I didn't want to disassemble the wings and torpedo! Therefore, I had to be sophisticated)
But with the back of the car it was easier. Factory Shumkov was removed, everywhere STP + Spleen lay. On top of them, again, NATIVE!
So what can I say! ) And the result is!
There is still a lot of material left, since it was not possible to glue it up ahead as desired.
I will give the torpedo to specially trained people, so as not to twist there something))
Photos the other day with salt! This is the first time I have not forgotten to take a camera)
BTW! Greetings on the first day of winter! Let the winter, if it is snowy, remain frosty (-5-10), white and squeaky, and not porridge with salt on our paintwork! ))
I'm happy only because I did everything myself)) Maybe, of course, there is no radical result, but I took my soul away, that's right)
as always)) played in 4 hands)))
in time: for everything about everything from 10_00 to 16_00)) at 16 the machine was already assembled and washed)
material:
1. STP M1 - about 6 sheets are needed, maybe even something will remain, but I glued it a little in front - I could not get under the factory noise))
2. SPLEN - I bought 3 sheets of 1.5 squares like)) one and a half sheets remained.
In general, I advise you not to do the bottom yourself) Anyway, you need to remove the torpedo, let them do it by the pros, at the same time they will glue each hole. But the rest of the salon and most for fun)
and where are the numbers? how much material did it take? what time is it? how many hands?
aberten
and the additional weight noticeably affects the dynamics of acceleration? in the same place it was normally added, kg 50?
but right away the sound in the car will play differently)) even if you just make the doors)
of course it will increase) well, think about it, like a little man you still carry with you! ) you don't go to the track)
maricone
so come - we will forget))) you will immediately feel the difference! In general, Shumka should be done immediately. as soon as you leave the salon!
and the additional weight noticeably affects the dynamics of acceleration? in the same place it was normally added, kg 50?
hardly in the evening) but I'll look tomorrow!
there is no garage ... but there are shovels, an ax, and still take some tool)
uhhu))) klassyak) you just need to have some kind of tool with you) well, let's figure it out) is
there a garage? and see in the evening how globally it needs to be disassembled in order to remove that shelf.
Well, we'll make the rear shelf for you in general for an hour)) I have the material if what is it)))
she may be a psycho))
you have to start somewhere, with doors for example))
oh, or from the back shelf! stsuko already got it to rumble!
hehe))
so come - we will forget))) you will immediately feel the difference! In general, Shumka should be done immediately. as soon as you leave the salon!
o my god!
if I saw my car in this state ...))
but on the case - cool! well done!
I have been quietly dreaming about obesshumke for a long time, but all my hands do not reach))