Nice little thing - Toyota Sprinter Trueno, 1.6 L, 1999
Recently, on a night ride, he was stopped by a traffic police officer. There is no
technical inspection (. In general, I decided to go through a technical inspection myself, bought mud flaps 2 pairs (xs why, one would be enough). Now we need to attach them for the weekend, for passing =)
The house is being renovated, but I really don't want to offend the car either. I bought little nice little things for her)
I'll write the code for exist, maybe it will come in handy for someone.
fuel filter (SP-2068), air filter ( CA5466 ), oil filter ( 90915-10003 ), spark plugs ( 90919-01164 ).
And replace the standard windshield washer nozzlesin blue writingwith nozzles from Volvo, this operation is described in detail on gtextreme, but I will still make a report, when the nozzles themselves come ( 30655605 ), the valve has already arrived ( 1450650 ).
And most importantly ... I can't decide which oil to buy:
> Castrol Magnatec 5W-40 C3
> Mobil 5W-40 Super 3000X1, API SL / SJ / SM / CF; ACEA A3 / B3 / B4
> BP Visco 5000 5W-40
> SHELL Oil 5W-40 Shell Helix Ultra synth. SL / CF
> Toyota motor oil 5W30 SM engine oil, p / synth. 08880-09105 , V9210-WA04
------------------------------------------- ----------------------
From bash:
announcement at the entrance:
Tired of staying at home or going to the same clubs - BUY YOURSELF GARAGE! 52 square meters for unforgettable chill-out parties, with a viewing and vegetable underground. Garage cooperative xxx ...
My brain was slightly torn> _ <
Apparently at Volvo they are mounted in a different way (in terms of connecting to the highway). I'm thinking of putting one more valve on the jumper between the washer nozzles, or in general from the splitter to power it in parallel with the valve for each. In short HZ how to proceed. But the fact that the washers should be fan-shaped is a fact. Here, in one pass of the wipers, they leave almost clean glass, and with jet ones until everything is smeared, it softens, until it is washed off, and more than one second will pass. And turn them on, like any others in a dense stream at high speed, of course, you must carefully (I try at traffic lights, or lag away from those in front, but it seems to work out by itself, not that I drive straight and think, figure out: " How could I stay behind to clear the glass :) â€).
they write that the Kamryukhovskys fit, only for them the fasteners need to be slightly altered and that the fan "beats" low on them.
PS the injectors will come, you need to check, the Volvo is not a Russian manufacturer, they had to think it over.
Update: 85381-AA042 - Kamryukhovskie fan.
Volvo writers work wonderfully well, don't give, don't take. But! from them my whole hood is flooded with "washer". Since they (pisalka) do not have an internal valve, the water that remains in the tube of the writer when turning freely pours out onto the hood, there seems to be not a lot of it there, but you look and it seems somehow too sloppy. I think Toyota machine builders, too, should have done something similar fan-shaped on the topic of writing, only with an internal valve, but have not yet found part numbers.
The forum says that at speed the fan becomes narrower and the visibility increases, but I myself try to turn on the washer at low speeds, because at standard these fractions of a second are also scary)))
Regarding the adjustment of the "pissing", it seems only "left-right".
and that the adjustment of the angle of "pisanya" is not provided for in the writing?
and yet - aren't such fan writers dangerous? half of the glass area splashes at once, and on the road they decide for a split second ...
Of these whiskey oils, the cheapest and least counterfeited. but in general 4a do not care for oil. Well, if you really spoil the car. current not pots and not mobile :)