Repair of the rear optics of the BMW GT, BMW STYLE for Chevrolet Cruze.

Hi all.
Today we will talk about tail lights from Chevrolet Cruze BMW STYLE.

These lights are on the car for about six months and during that time, in the section turn signals burned out for 6 LEDs.
Optics is not collapsible so it will have to be cut.

first thing take off wire that they would not interfere

with a marker made marks where to cut and using a soldering knife began to cut the body
in order that the seam was visible to the light took the led

through the holes and illuminated the place cutting inside

15 minutes later we cut the lantern.

here is what is inside

and here is the module with the turn signals which need to be replaced.

The difficulty lies in the fact that in optics in this section the turn signals are LEDs 3528,but they have 4 legs, not 2 like we used to.
It was decided to make the tabs on the PCB and to power all this with a pulse voltage stabilizer.
Well, for everyone to see threw this video on our channel in YouTube

That's that, then!
Good luck to everyone!
All the while!

Our page on DRIVE2: