The Fireball project: disassembly, overhaul and test results
As they say "hired a gardener this evening" :)
Now you can not mow the grass, and deal with bullshit. Especially if you get out of work early.
Lamp, recall, are:
In General, the problem number 1: the very gemorno to disassemble these lights.
Glass firmly sits on Hermetica, heating is not particularly effective.
In the end, freaked out and fucked up just with a screwdriver on the perimeter. The burrs then will undermine, well, either buy more glass or other gadgets. It is necessary to think.
Here is a "stock charge". On the sides of the single diodes is DRL. Type. Shine less than 1 watt in total)
In the middle of the 3 diodes, one lamp gave out 650 mA, the second — 445мА.
That is, 9 and 6 watts... judging by the other tests, the correct value is 6 watts.
But... no, it's not blue shit, it's thermal interface in Chinese :)
"Spit uncle Liao" is called. Right in the heart.
How long will work 6 watts with such a quantity of thermal paste is necessary to guess only.
But what thermalpad uncle Liao "slaps" on their boards. 1/3 of what you need.
Where there it will heat through these "strings" is also a question. On the driver chip the same crap. Bitches.
And this is the Cree XP-L. Single chip 10 watt. In top speed. Well, the driver certainly normal, your on 2A.
On 3 and with a microcontroller, but it is then, now to torment the diodes on this Board is a sin.
The final commercial version :) Shutyu. Test.
3 pieces Cree XM-L and my most unassumingly driver 2A.
And now "sweet".
As Shine.
STG is great the beam is very narrow and very broad.
Replacing the diode on the form of STG is not affected, all gorgeous and even became sharper.
All photos in manual mode (shutter speed, aperture), settings are the same.
This is a stock 6 Watts. Well... Yes, well, widely, and I think slightly better than the 35 Watt halogen H11.
To the fence ~25m. Not blind at all, in principle. From bullockstone, of course, very different — each time retreated and watched.
But my modificirovannaja version. 21 Watt.
Let me remind you that the photo is ONLY ONE PTF.
For those who don't think the photo write — result Ah...nny. It is LIGHT (does not Shine, and LIGHTS) at the level of the regular xenon. Yes, the shadows long, but this is purely due to the low position.
I am, frankly, that's not really expected. Who was screaming about opswat — here's the second middle in fact.
All sorts of Hella nervously Smoking in aside, talking about the farm type lisovanim PTF did not speak.
For comparison, the regular xenon
And this is my current lamps in PTF mode the far, 30 Watt
Modified PTF for 5 minutes, warmed up to "lukewarm".
That is so light you can ride constantly.
I will order a normal Board, make another 2 rows of diodes, for fun I'll try to make "far" 80 watts — if you put a number below and a number above, it will just need a strong illumination into the distance.
Something like that.
In General, everything turned out as I expected.
Our page on DRIVE2:
High Performance Lights Automotive lighting system 50 verified reviews See prices, photos and contacts
When I took them in hands did not expect that so well done and the fixing metal, a surprisingly straight for China with the same price
In fact, after the simple fashion, this is the best in the world tomance diode essentially. All sorts of OEM from BMW and DIY Morimoto nervously Smoking in aside. So Yes, Chinese vampires that are timid on the design boards, but everything else is done perfectly.
Pornography, she and China pornography, Chinese pornography so separate pestni.
Well, now at least good came from these trinkets.
Max, Hella, shit, there the lights twice less )) I want another mode to do so while it is only the first tests.
BLL
Serge you jobs BL
Each time higher and higher
Postponed I bubble on your balls)) fire))))
Don't forget the driver with the gates))
Hello д2с I even decided not to put in the PTF
Although nurtured and prepared gooood!))
I'm not critical 20% — so 20%, with 15 watts per headlight (include three emitter, 5 W) that does not greatly disappoint. Dimensions will be smaller, the shape of the entire module rectangular — shaped of the lens.
There are more in the nature of a Fresnel lens. That would be quite cool...
Lenses you do, I should say. For pouring you should be under pressure. In the poloidal case the losses will be 10 percent. And if you do not "push", 20
Well, it is, of course, no offense! :)
I will watch the evolution of your PTTK, look for lenses for its.
Good luck!
Well blah, you voiced the obvious, no offense :) Well, except that the words "astigmatic" I forgot for a long time :)
The Board has long been in production, and checkerboard're not needed.
Headlight is not to say that expensive. I bought 4 pairs at 2900 5000 in addition to the first and second 7000 ) for the 2900 are the same as for 5000
If without emotions, I'm just trying to understand how this headlight works, to estimate the possibility of a repetition structure. That is from the human perspective, just understand the physics. To convince you of something — there is no such desires, I respect such as you, considering the opponent rather competent in his job. Just sincerely believe (may be mistaken, not a question) that in this type of the headlamp reflector is not needed. Thinking out loud, as they say. If you include it with the lens, but without the reflector, it is possible to see this (or I'm a fool, and in General you are right :)). While all wrote it — finally saw the reflector :))) that collects the light coming past the lens up and down. The pics did not immediately realize where he is, and that's what it is. I apologize. He's a little complements the lens in terms of efficiency (the price of a small defocusing of the beam). That does not contradict your observations.
Here, an astigmatic lens, that is not the same in the horizontal and vertical plane. What she collects — it's all clear. Vertical is very good collects, the diodes in focus. Horizontally — no obligation. Hence, the cylindrical shape suggests itself as the most easy to repeat.
If I'm already quite tired — I'll try not to get it. Just buy vtridorogo simple "little thing", which is also necessary to alter — not good, thoughts about your option.
Just say about adding rows of emitters for high beam. The number above will give a band of light under the nose of the car. The number below will give the individual a clear band above the horizon. Another thing — the checkerboard pattern, the crystals have to overlap each other vertically. The spacing of the diodes horizontally the weather will do, places under the lens bulk, reflector under it too can be cut without problems. For PTF've been burning the main (upper) row, and further all the diodes.
All the best!
I think no use to continue the conversation.
I Russian and white that have personally tried.
I did it. Saw and held in hand, and you nifiga not seen, Choate there on a photo saw, but persistently telling me that it's not so... strange how it looks...unhealthy...
And physics, of course, is not your strong point, just do not understand how to vygljadet converging lens.
Colored — mean, "chromium coating" reflector? This is a big problem?
Look at the first picture — well, there is no reflector, the diodes on the Board can be seen, the reflector is not visible. If to look a photo reflector, but no lens...
Looked at the pictures — the lens is not exactly a cylinder, but Oh to hell with it. With a clean cylinder (without reflector) would work too, STG will provide a clear area of illumination is wide. It is necessary to try the case for the lens.
You can even five times to apologize, but this fact will not change :)
STG forms a reflector. I've included a spotlight without a lens, on the basis of that claim.
The lens still focuses the beam a little and stretch it horizontally.
But the main part is a reflector.
You can even cast from silicone, it's not a problem.
To paint you than you? :)
Sorry, but there is STG that is a lens shape, reflector Pettneu owned in part, because through the lens it stupidly is not visible. The lens is CYLINDRICAL (in cross-section is part of the cylinder), it can be of Plexiglas or politiki/epoxy to mold, removing the mold from the chrome pipe (for example).
OmegaBY
If it is good for microscopes, why is it bad for the car?
Lenses for xenon glass are doing, and for ICE optics too.
And despite the size, like not a pound weighs? And this lens is clearly smaller. That is especially the focusing part, and not that the sides hung.
I wrote:
and. Heavy
b. Have PMMA light transmission is better
V. the Plastic is easier and cheaper
Optics for xenon has a different operating temperature as you can guess :)
For ICE optics one glass does not. Well, maybe there are, of course, examples, but it is only the exception that proves the rule.
I focus not see the reflector. Where is he?
Without reflector losses will be great, but I just didn't see it in the photo. Otherwise, really no sense to fuss.
Well, if it's about the handmade one-off, Yes.
But it is easier to buy and tear from ready.
I don't think glass will be cheaper...but hoo nose.
Gravy, by the way, that 50% of the work makes the reflector.
In X6 100% glass.
I realize that it is cheaper and easier, but I do that to make a lens of PMMA nowhere, and glass these lenses do side.
Trained I like that the samples with different focal lengths, but they are small for a single diode.
I'll try to ask to made a long 3 diode. However the holder will have misrecite myself...
For experiments...
I wrote:
and. Heavy
b. Have PMMA light transmission is better
V. the Plastic is easier and cheaper
Optics for xenon has a different operating temperature as you can guess :)
For ICE optics one glass does not. Well, maybe there are, of course, examples, but it is only the exception that proves the rule.
If it is good for microscopes, why is it bad for the car?
Lenses for xenon glass are doing, and for ICE optics too.
And despite the size, like not a pound weighs? And this lens is clearly smaller. That is especially the focusing part, and not that the sides hung.
Well we, like, about automotive optics, and not about microscopes )
Okay, I'm probably the wrong picture of the scale evaluated.
We have lenses for microscopes glass do... and all over the world too...
In glass with a pound pull. No one does glass for a long time already, and PMMA light transmission is better
so there's a kind of lens is not very large.
the rest of the decor for the installation part.
Glass is makes no sense to do because of the weight. Parameters can be removed by buying original
I can such lens from glass to make. And enlighten even...
I have the parameters of the lenses...
There sfericheskoi lens, it's not a reflex optics. And the quality of printing on 3D no
But it is possible to make a model of the reflector to repeat on the 3D-printer? You can train and mass production will be ;) If anything, I'll be first in line for such a device)
Nigrechok63
Sergei, you are a magician! A striking result) And what color temperature from cree? And I wonder how the "fireballs" in wet weather behave)))
Went in a terrible fog and rain with a Volvo. The Volvo is only xenon, I have xenon and fog with yellow bulbs. In fact from PTF's useless. There were a couple of situations where the PTF was given the win. But it was minor. More important than brightness and STG. Of course, in wet weather, better visibility with yellow light. But the diodes with the same bean don't get together often Shine less brightly. It is therefore easier and cheaper to put a white bright diodes.
Sergei, you are a magician! A striking result) And what color temperature from cree? And I wonder how the "fireballs" in wet weather behave)))
Sergey, and where there is a reflector? In the photo, I didn't notice.
Lens straight or arched along?
The result is good! And what kind of lens or lens system is used inside? Can I repeat without buying essentially junk tumani?
Sergey, welcome! The only ones I have are already a couple in stock lies. How much will it cost to upgrade? :)))
Well Serge, again waiting for more)))campaign have been thinking about where the old lamp from PTF to put))))
Class, a very impressive result when it's finished. And yellow (~2700k temperature) is also really such to make? After all, in the fog\rain\snowfall with yellow would be better to see the road.
They are impressed with Sergey after he had them remade. So if you're going to take, take, Sergei redone. No alterations will burn quickly due to pigeon poop
Sergei, good morning. Thank you for such a detailed report. If you are impressed — it is necessary to take. Will take. Long dreamed of extra light. That would be like a day. Here it is the new era of Led Light
Don't know yet, need to datastorepath with normal cards, and there already and to think.
J up should be no collective farm in the regular places.
Serge, to buy such alteration or wait for the finished version? On jihe they easily stand up or the bumper it is necessary to elaborate?
Great report, not that I have))) I think it is better to make two rows: one tomance, the second DRL
at this moment there are no plans to do this.
so I definitely saw them will not.
and then we'll see.
Great report. And how much money these lights you will have to cost with the upgrades. ?
MAXRUS85-4x4
Yes, my jaw dropped! I'm impressed.
And the driver what?
Where would these lenses to get! well, at least something similar.
PS And under the driver always need heat to make.
Can I purchase such
That it is much more accurate more accurate and more efficient. Frequency post 10 times more.
High Performance Lights
It is no secret. A6210GEUTR.
Than this driver is better АХ2003?
If better of course...
Thanks Sergey. To read about him.
PS I know You are ready to build the driver on-Board mass-produced in industrial conditions is made. Properly understood.
Driver usual. My. Hundred years have to reverse used. With the heat everything is normal, I have learned quite normal Board design with heavy thermoregulate.
Yes, my jaw dropped! I'm impressed.
And the driver what?
Where would these lenses to get! well, at least something similar.
PS And under the driver always need heat to make.
Price for a pair of 28 thousand. Think wanting the crowd, all the more want to buy
Hello!
And about such PTF that you can tell someone has put www.allhella.ru/catalog/m...odiodnyy-de-svetodiodnyy/
Sergey Hello! I bought the same as yours I break. It is possible to order you have the finished boards with all the trimmings LEDs driver if Yes then how much it will cost.
Because no hunting was prazdniki to do it. I'm on the bike riding, Quadra, booze and moral decay. It is enjoyable. Reach your hands, draw and order fees normal, then finish. Success was gorgeous, left technique.
Sergey, why didn't you graduate? Has not achieved the desired success?
I have found three willing with such lights ))) Ready so to speak to give Pdfci in Your Golden hands!
Sergey, welcome! Finished a project for the alteration of these PTF? I have 2 sets of these. How much will it cost to remodel each set? My 2 led strips — You remove them completely or replace?
I would also charge with two-three rows of diodes bought, that you could use as DRL and tomance. What else to come up with two lines? To leave like an envelope? Can also add brightness?
How to get a new Board, and before that they must draw and send to production.
super. Do you plan to "implant" the decision to not round tumani?
Well, something versatile lenses in the headlights
In the photo you can see everything, and in the text I wrote.
STG is great, illumination is not. Not blinding at all.
Gee)))) T9) is not sent by looking)
Right: what this solution with STG?)
Is there a glare?
they are good but the unit that went to him went missing(lost) if you connect to premul they barely Shine that stick instead of block
HELP WITH daytime running lights sho-me unit BARELY MISSING the LEDS WHAT to DO?
Hello! Appeared full led fog with DRL's beautiful, but tsenik. www.golf-tuning.ru/Renaul...yie-faryi-hrom-17395.html
Colleagues, as you dismantle them?!
ETOGES impossible some lens refuses to come out ((
respect you! long burn this case there are diodes 10ватт in the form of a square and lenses, here's a question for you - I've PTF with the reflector and lens if you put the diode distance from the led to the lens plays what role or the lens directly on top of the diode to sculpt?and about the driver - my diodes are heated horror the radiator from the system unit (processor )-gets hot, feed the led direct from the battery 12V what driver it is advisable to put a reference to aliexpress or self-made variant on several of the available items, maybe just a resistor or without it to manage? Thank you!
Sorry(
I wonder what is the width of light from these modified PTF (degrees)
And whether the width is more, if you place in series 3 and 4 of the crystal?
And Lepage haven't tried you to tune? There are in fact reflector is — I wonder what will happen)
The beam is two times wider (in proportion to the size of the LED crystal)- only as DRLs.
well, in that case, all of a sudden would THIS lenses made slightly wider than the height of the beam
I'm not interested, because even finger obviously THIS lens will work with him not as intended.
So the question: with one Cree XHP70 not tried? I wonder how this lens will focus.
High Performance Lights
About "9 led" the first time I heard People got the test kits, waiting for reports
Painted reflectors and side lenses Chorny. When you turn off the headlamp appearance became different, I don't know how to treat this. But in aerochem option left unnecessary glare, blinding now finally. Dipped xenon and the more illumination it gives. In General 👍.
The diodes in the 3 series, tipo — DRL, far...
Also want to upgrade.
And what is the price of the test kit?
About "9 led" the first time I heard People got the test kits, waiting for reports
Well, that there 9тидиодной modification?
Identity lying in the garage these lanterns
Have it running in the basement H13. now are the usual galogenki — so they are useless almost there. yellow and do not illuminate anything. In PTF are diodes. Also do not Shine. Yuzayu as DRLs. it looks like this prntscr.com/9hypzz
prntscr.com/9hyq83
prntscr.com/9hyqb0
prntscr.com/9hyqdc
prntscr.com/9hyqfs diodes are. 901 per couple Ali. in short, they don't hate me, but near/dal angry... and galogenki heated and warm glass and they dry on every road of Guano, and the PTF does not adhere.
Well, if it's not head light, and all sorts of DRL/turn signals, I think you can.
And you can come up with something to replace the poor halogen American option on the Mustang with base H13 and H10?
well, in any case due to the low mounting height even when the fucking light from the PTF, the result will be less spectacular than a good beam. But in KACH-ve a Supplement to the middle light very well. By the way, tomance Microde very good light width! I have such standing, but with the xenon light they are much better than halogen, with a good STG (when put xene first checked in the shop as it will Shine in terms of flare past the "goal"))))
There certainly is, but from the side. Before that the previous owner put xenon. I went and took a picture of the light from him in the subway. (directed PTF was max down). Then put the LEDs, and also filmed in the same place at the same distance, then lifted them a little to not Shine as the xenon 50 cm from the bumper, and a bit further away (to the lower edge of the wall were getting to (the junction of the floor and wall), that could be seen from the place even with them and filmed. In the end, raised the LEDs higher xenon in first light is better than xenon (evenly the light is distributed on the pavement, not spots and some lines, highlights and xenon is like a haze all the lights slightly and almost ceiling) and wall up light is not falling as from xenon. From xenon were some vertical light stripes on the wall, and these led on a wall light falls (gets about the same amount of light on the wall from both dimensions). Ie they are not blind as xenon. Go with them in fog, rain, snow and poor visibility. Much better with them. No one blinked once. In addition, traveled with friends on long distances (they are on passenger cars), with his father (SUV). Asked then, blind or not. Said as middle, not blind. Even 1 time I asked to see, blind or not. And tried to move on long distances and watch. Not blind. Photo if to take a picture up close looking at the lights, but in the photo the flare is, but as well as from the middle (the camera apparently, so any light in the dark starts to paint, it is necessary to think how to take a picture maybe). So in your tests it may be like that and shows itself not, but in real life, in practice, normally. Maybe PTF is not a regular stand or fixture as it is rotated (xenon because I was stuck without alteration), and can therefore better light eventually came out. Instead put Xena for inspection staff galogenki, light like 0 from them, even at close range by a person you can lean on PTF (can of course lamps are cheaper).
And how can they Shine up from the bottom if led 2? Then they must up and down to Shine simetrice if they have out-of-focus is with the reflector. And if galogenki, it is in all 4 sides, as she round the light diverges from the spiral. If the light is right and the focus is going, it doesn't have to Shine up and down. The LEDs are directed not forward (then blind) and the hand, respectively the light reflected from the reflector and needs to fall correctly if we want the distance from the reflector. Sources of light less (than the filament, which shines in a circle) accordingly, just a portion of the light in some areas needs to be clipped, there should be nedostaet in comparison with the standard lamp.
Looked at the photo diodes installed (then rearranged them and the situation has changed) but in the photo I have the diodes at the sides left and right, not up and down. You should try to turn a half-turn (up, down, and to watch the flow of light).
On account of the blink, better blinking light, I always blink, who can think about the headlights, and he would be over if I blinked, then for example it would be clear about PTF. But I blink only when I forgot to switch far. 2 times in 3 years of operation of the car.
Me more pissed DRL at half intensity or whatever in far do. Kick it as a blind, even during the day. Or those idiots in full heat or go idiotic with this floor heater, like it or not, the light still in his eyes after all, then at least the floor, as though from the glow, personally I blind and often, almost every 10th car. As we drive closer, we see that the section of the burn where the far and the middle does not Shine, respectively, this DRL.
I tested the bulb as you. The report for a year if not more.
First your LEDs are not very correctly, so Shine a little out there.
Take a photo in the dark and compare with the stock lamp.
Secondly there is no STG and it's not the fact Google everything is written how to Shine PTF. You Shine from the bottom up just in the eye. Stoke is shining parallel to the road above axis PTF.
If nobody blinks on the road, it means nothing — I personally every freak is also not blinking, but this does not mean that they are not blind.
Second, the impact there of 1280 lumens at approximately the temperature of the heat sink 90 degrees.
This is slightly more than the regular halogen at 12V (1260 lumens) and less than the halogen at 14V (almost 1400 lumens).
So the meaning of these lamps is that as DRLs. Night with them to go — bydliste, sorry, in other words I can not find.
Cool though:) It would be time, too, so would do, but yet stuck the LEDs in regular PTF, kind and never has and Shine well, at least better than xenon when there was, it lit up was.
www.drive2.ru/o/b/1724614/
the links in each topic's description is, prices
In jokes future physicians regarding diseases of old age, and it sounds like this question: what is better to choose Parkinson's or Alzheimer's? The choice of potential patient, of course not, but students will always find the answers: Parkinson's disease is undoubtedly more acceptable, because "better to spill a little bit of cognac in the pants, than to forget where she hid a bottle." So this doesn't apply to me, I'm in good health and quite adequate, and what you want. But you know what stupid is getting smarter, and we're just... old fools :-)))
Age is not an indicator of the presence of a brain, for the indication of a high probability of Alzheimer's )
Watching on TV, and we really like the thread here.
Your coldest "teach materiel" does not impress me, I think that tomance this one, and extra LED in the foggy Farah is another. So you have to learn the materiel.
I think our debate is finished, if you're like Pindos not admit reality and taldonish that "Russian aggressors" and do what they want in the plan.
I haven't toldonyat.
On descriptive level, these tumanami couple of years traveled for several hundred people across the country and a lot of reviews there in the fog and outside the fog.
And dashed they are generally much longer than even two of your life.
Who are you what you want to prove?
With yellow tumanami do not travel a hundred years and no problems. Why? Teach materiel and understand.
I will not teach, but just noticed the fog lights and additional light is a big difference. You heard the sound, and really don't know what it is and toldonyat "teach materiel". My life was the trip except when on the yellow tomancak and the ride was not practically possible — a solid "milk" even in the middle light, not to mention far.
I do not care how much someone has passed — materiel teach yourself before someone to teach.
But if not, you should not meddle in things, nature doesn't understand.
You not even born when I went to fog :-((( I'm 52 years driving passed that God give you so much to live. I'm on the potty sat for more than you're driving :-))) Not to be confused with extra light to horse radish headlights with tumanami.
Materiel read about the eye's sensitivity to the spectrum before you repeat like a monkey, another legends, fact you don't understand.
Then you can talk about the fog )
I'm in a fog I travel a lot, living outside the city and the lights and fog on all the machines led. Tell me more fairy tales, a connoisseur of fog)
High Performance Lights
It's a silly tale.
I have a car with led PTF from the factory. Yellow smoke on the sidelines.
PS
The return of the yellow chips TWICE lower than the same white at the same current. Constructively.
While heating to operating temperatures nearly tripled.
You're just not driving in real fog, your LED vs yellow galogenok rest:-))) It's show-off with LED in the fog will be with them like a blind mole, a circle will be white and where the hell leave. All fools invent yellow tomance, and reliable brake, they are all ignoramuses and cowards and in the process, you are one clever and a revolutionary.
Where is it? White diode is actually blue, to white "achieves" phosphor. Monochrome has always been brighter. Ridgid became a reason to put yellow in their beams.
Even have the interest to talk on this subject internally. Those engaged in General LED lighting why avoid car theme party
Probably because legally require a complicated procedure of certification.
Dim, if you actually do this and have a base, we can meet to discuss.
At once would write, and then there is mostly just the writers :)
About the stamps really looks like :) Stock halogen on 1250лм yellow still does not compare with 2000лм "blue".
Recently I was driving in the fog is bad, nothing will help if not to dissemble :)
I have X6 with led optics and is.
About point sources you are not quite right because these Pthah they don't scatter at all, and the thread in fact, is collected by the reflector and lens.
About the chips you are quite right, 10 watt chips 3.5x3.5 with small chip a lot, however, the die area I was looking at seems to be just 1x1.
In FireBall, they live well on the 2A, and if a little modify, then 2.5 and even 3 master.
We can check? :) tonight I will be in Moscow (I live in the area). Lenses are on the base of my Hella 90 Premium 66240CLC lamps (4000K). LEDs nervously Smoking in aside. Compare Infinity QX-80, four-eyed Mercedes and BMW X6m with led optics. In the rain LED nichrome is not visible, unlike a normal xenon, which is almost gone in modern cars.
And this is not the stamps — I'm nine years animaltalk lights, and even a physicist-optician. The shorter the wavelength (closer to purple), the more refracted the light. In short, the higher the color temperature, the more the light is scattered, because in fact microcaps water, the same prism.
But greedy manufacturers LED headlamp deliberately increase the color temperature in the pursuit of efficiency, instead of make cluster spotlight. Here to mersedesov finally came, and they still had 4 headlights instead of two, and shines it on the regular level xenon. What is the problem to do 6-8 clusters and to finish them to a normal brightness?
The trouble all modern Svetikov in that square millimeter of semiconductor well, does not pass a current more than 2.5 A — it just burns. No problem to make "scrambled eggs" watt on 200, but for the middle and tomanek need a point source — only it is possible to focus and get a clear "cut-off". Therefore, the only way out of the cluster optics. Something similar has already started to make Nolden, their three clusters, each illuminates its area of road two sides, one shining in the center. But the price tag!
You have production capacity, why don't we join forces and not to make normal, affordable and quality LED lights?
You repeat stuff that people write without thinking.
Yellow light a little more comfortable and familiar to the eye because closer to natural sunlight. That's all.
I drive a car with led head light a long time and no xenon not be compared with him. About halo, I generally keep quiet.
Please do not treat me the stamps, I have them all heard a hundred times.
Nothing CRI has to improve the efficiency of lighting in the car, svetodiodnyh headlights it is generally below 70. No offense but you hear the ringing but don't know where it is )
The blue spectrum is much worse than is reflected in the direction of the light source (i.e. the driver's eyes), so despite the higher brightness of the "white" diodes illumination of the road with increasing color temperature deteriorates, especially in wet weather.
In theory, everything is beautiful, but in practice halogen work lamp Hella makes any led at far less cost.
From Cree is the technology of True White — there dosvechivat white spectrum red monochrome LEDs to increase color rendering index. Maybe one of the crystals to put yellow? For example, three white, one yellow for the alignment spectrum.
My interest is not idle: I never found a sane manufacturers svetodiodnyh buns, and what you are doing is really cool!
"On a positive note".
No offense, but no time to paint separately, you could write a note about it.
Meantime take the same Datasheet on Cree XPE2 series and look out, there is more than obvious.
PS
What rigidity it puts me a little worried, because it is populism and divorce on the sucker.
It is obvious that 1000 lumens yellow will Shine in any case worse than the 3000 lumens of white.
Well, I have a car with full led optics, so I know whereof I speak.
Where is it? White diode is actually blue, to white "achieves" phosphor. Monochrome has always been brighter. Ridgid became a reason to put yellow in their beams.
Even have the interest to talk on this subject internally. Those engaged in General LED lighting why avoid car theme party
It's a silly tale.
I have a car with led PTF from the factory. Yellow smoke on the sidelines.
PS
The return of the yellow chips TWICE lower than the same white at the same current. Constructively.
While heating to operating temperatures nearly tripled.
If you can price the finished solution. Ready to buy. Like Morimoto, but now your option to buy.
On Ford M5 would be such. Only in the middle...
As well as H7 and H15 to replace the headlights... but there is a problem that the rear edge of the lights very close to the wall. Bulge should not do :(
90mm, while limited editions, separately, will be classified with the characteristics and prices will go to the productive.
Plus far have at least blink and the DRL. Although DRL rather envelope, but you can do far 30% as DRL
"Let me remind you that the photo is ONLY ONE PTF."
That's what I missed.
It turns out in 2 times brighter. Good result.
Features written, compare.
Not very clear what the question is.
Or need help to compare 9 watt and 18?)
And if to compare with led PTF from Lexus?
www.drive2.ru/l/4825217/
The price of these 9 thousand, if I can do cheaper or brighter?
Sergey and Hello!
What will please, when it will be possible to get a long-awaited kits for PTF?
Good night! Also interested in how the process is moving, just shut Off this company and want to put fog with DRL.
You add "I think" in your comments.
In the nearby posts have a photo with the imager, it is even such to the couch experts like you, it will be clear.
Well, 2100 lumens in a narrow beam PTF is more than enough. Especially considering that the factory fog led provide at least 1000 lumens.
in the manual all the parameters given to the transition temperature of 85 degrees. Even if the operation of a single diode is on the average of the current 75% of maximum — this is 2250 mA, anyway the driver is weak)
Seriously? You read the Datasheet again. And then calculate the transition temperature at 3A and derating flow.
And then you hear the sound of...
You've already written about his discovery in koito, OSRAM, etc., and then they are fools, all in the 75% of current chase. But often lower.
I'm about the same) you load the driver on high, the diode can not get even basic features
Well, that's why at the maximum current in the machine one chips and not to drive.
Your car the maximum speed of 250 km / h.
And your average speed is 30-40кмч.
It turns out you brake... :)
Looked Datasheet on the XP-L, one diode in the hot mode with up to 3000mA consumes, it turns out your 2A driver very weak)
Good day, Sergei.
Lights were purchased a year ago, disassembled and waiting. And I'm waiting.
When you can buy the Board for modification?
Welcome! In the sale will be such a PTF? Bought-have for ASX happy... Tormented with the choice of DRL, China does not want to... here's a thought or PTF or a kit in turn signals.
Sergey Hello. PTF 90mm when you can buy or circuit Board with your alterations. Thank you
Thank you will follow, just as soon plan to buy a bumper with tumanami about the right size :)
Yes, but you need to swing and to start production of new card and driver...
Say the project is still alive? Very interesting good light in tomance, native catastrophically lacking
Hello!
Tell me how much it would cost to purchase such modernizirovannyi (modified) PTF?!
Looking forward to the massive sales :) And how many they approximately will cost? Well, at least plus or minus.
i.e. without dissipation? I just don't see the problem of movement in the fog with the main light, standard tomance always lose my glasses, so was thinking about the solution to this problem by installing lisovani, they are more streamlined in form, should be less disposed
Hello! What's wrong with linkowanie xenon in PTF? Now it is ready to sell the modules to install...