Peresvet PTF Mitsubishi Pajero Sport
3Добрый day! Today we have the same lot and not once I was done, namely Mitsubishi Pajero Sport my chief Jura Stony55. This time he asked me to give him another PTF and DRL! what a good idea, why not do it! now he ignition on turn on and the front DRL and rear — complete harmony)))
And so what was done, dismantle the lights with a hair dryer and screwdriver, then a little, just a little modify: Unscrew the reflector, cut the baffle a little and one corner well remove the tightness of the lamp is not as not suffering! Further from the vent cases hole a little bit(well, it is not clear why it was originally taped piece of paper) and insert the 3rd wire which are responsible for "+" the DRL and everything! fee ulitsa on 2 sided tape, the wires from the PTF soldered to the cap with the led lamps and going all back! power at 12 volts: DRL — 6.4 watts, PTF — 6.8 watts.
used red 102 led 3528 resistors for these, 430 Ohm, 51 cold white 5050 led's and resistors for them 240 Ohm stub voltage 12 volt a customized and third-party PCB 2 1.5 mm.
Recommend to friends, do not forget))))
Will perform custom work, more details on my blog!
Will be after the holidays( I checked on the street well, the wire still pull for the DRL
Motel on a mustache))) mono and you do, he will set easily) after the holidays will be the photo with the car!
gyyy)))) there is, and there's a patient, che would not break his bones))) it is Nexia will not take a lot but podgaric moget)
As is usually the vital best in the business! Do not give to live in peace with their innovations))
Yes, just don't like guy 2 a third-party to do these jumpers well direct yyyh! red I've soldered for about 30 minutes-an hour, but the white kind of soldered on to sense something, then resistors, then jumper upper, then lower... in short some lantern one day was doing the second the other day! eyes just get tired!
all, give yourself installation that the holidays do! I will not sleep and you will! chief just said you need holidays to do that is to do)
yyyy, well, if the current work in the centre, the house can not the mi child and eternal creative house)))