Disease Progression - Toyota Land Cruiser Prado, 2.7L, 2000

At the stage of buying an alp svr1042D, I already approximately "saw" and knew the future system, in the end it was like this:

The construction began with a raised floor under the wuxi, and also decided to cover the wuxi with glass and illuminate it all from the inside.

In parallel, I made boxes for subs. I decided to first try ZYa, then FI, tk. the boxes were minimal in depth, the pipes were cut into the top cover of the box. the volume of dirty was 36 L per head. in general, there is nothing special to describe, everything is in the pictures:

Then it came to power supply. Akkum replaced Puma with 100A, wiring-2Ga Belsis, minus from the body and 1.5F (bedsores) - without a conder, you can't beat it :)))
In parallel, the Shumka of everything and everything, well, everything is clear, I think you don't need to throw pictures, there is not much to look at :)
with the front, too, everything is clear - the middles on the plywood rings to the regular places, the food in the panel to reflect from the lobovuha is also in regular places (yes, the pradiks have tweeters there normally), the front-end under the water sidushkoy.

In this form, the result went to the first competitions: 3 cups, 3rd place in EsKu, 2nd place in the absolute in SPL (139.2 dB) 2nd place in ESPL (I do not remember how many)


I decided nothing for myself, but I needed better. and new thoughts on the upgrade were already ripening in my head and I had to get acquainted with polyester resins and new technologies in car sound for me :))
damn it, why can you insert only 20 photos?: ((sorry , okay, I'll insert it into the next post.
in 30 minutes there will be a trace, I promise there will be more interesting and there will be an exclusive :)