Smooth ignition tidy Forester SG9 restayl AT
Hello!
Small report Peresvet tidy with automatic gearbox. Let me remind you, the restayl the tachymeter scale is not erased, a green filter applied on the external side( So ordered a new scale from k1taez.
Scheme of a smooth ignition belongs to Stepan Pavlovich once respect for the development)))
Display peresvyet easier than on corestyle, to use no need of contacts all with one hand. Turn down the screen wash Zelenka, insert scarves and rejoice:
To check the work tidy and install the shooter need apply voltage to the contacts of the plug:
yellow +12 green minus
When the ignition is turned on, the arrows should stand up to the SOFTWARE zero position, it does not correspond to "0" on the scale markings, so before removing the arrows to scroll clockwise for the stopper, and turn the ignition on, and then take a picture.
Day mode
Night mode
Scale tinted
To connect needs only 3 wiring: +,—, and the brightness control (+12):
Video about setup modes:
And tidy is sent to frellander
Pozdravlyaem!
All beautiful Primorac)))
Well, the most fashionable tidy my)))
VerterS
Only on Forester SG5,SG9,
If you're interested in PM)
What stands in SG9 automatic 2007 left hand drive ?
VerterS
Only on Forester SG5,SG9,
If you're interested in PM)
Beauty! MNU just SG restayl, interestingly, the PM wrote about the salon, but also have the desire and the tidy Attunity.
Insert is no problem, but is harder to get. The main thing that the axis remained in the motor.
Details here www.drive2.ru/l/6640389/ )
oke, and how to insert arrows then they are not jammed, I last killed her, and all podklinivaet((((
Supply power to the tidy, the ignition contacts. The speedometer and tachometer go to 0, the tank and the temp at minimum)
Thanks, but not necessary to have, I rescued her buddy subarist, he with his back rearranged their instruments and ezdiet is happy, but myself I'm a black set for cheap))
Send, mend) was not such that would completely die)
This might be useful www.drive2.ru/l/6640389/
Supply power to the tidy, the ignition contacts. The speedometer and tachometer go to 0, the tank and the temp at minimum)
Klaaass! ! ! I have all this live seen)) Simply super! Well done! Golden hands you Sasha ^_^
so what? Beautiful! Probably the most adequate and high-quality work of which I met for the last time on this topic !
There is no such mode) Blinks when the maximum or minimum brightness values when configuring)) for visual control
Kruchenykh!
And nobody knows how to Impreza 1.5 (Prol) to put a dimmer on the backlight, and then the middle day include side vaapsche not visible!
VerterS
Thank you!
will do of course, but after Balashnikoff )))
When you write to me? ))
IT'S A MASTERPIECE! NO! THIS CHIC!
HOW?! HOW CAN I MAKE YOU SAY SUCH A THING MADE?! )))
Listen and BK only on the machine there? I don't have on display oil temperature.
Well, change the backlight on a white smooth ignition and test what is the price of at least about
Yes, the 10.5 volt output
heated of course, there is lineiny, but not critical, 48-50 degrees
you can look at the wiring of the LEDs to the onboard network of the car? the downside they are connected to the controller, and +? On the Board you can see some detail. The voltage regulator?
Alexander good day, respect the Golden hands !) it is possible to order the instrument panel and tail (running) lights on the Forester SG ?
Good day. Would like to receive great dashboard for forester sg5. Interested in price and conditions of work.
something went wrong apparently, in the dashboard several stabilizers at different voltages.
They do not need to connect enough to the bulb for example, or to the ignition.
Here is the actual work www.drive2.ru/l/487323620591272328/
Tried to make myself not work. The instrument is a stabilizer apparently. Caught fire late and sharply