The collective farm helped from the cold :) - Toyota Corolla, 1.6 liter, 2008
I'm tired of that (below -36 degrees) at a speed on the track, the car freezes right on the move, and the engine temperature begins to fall, and the clutch becomes tight, I decided to poke around, I took the cardboard cut out in the shape of the muzzle, and pasted it over with self-adhesive film, well, fixed it from below the same thing, the result surpassed expectations, the car thawed straight out, it became much easier for the manager in such a frost, and the heat was immediately spun into the cabin. Do not judge strictly vidon of course flawed.
Price tag: 200 ₽ Mileage: 32,500 kmeverything is clear!
I understand you, I was looking at the thermometer 5 minutes ago -38! :)
I have felt under the hood and the rodiator grill is closed with a cardboard, the heat keeps the experience decently longer today.
let them laugh, but the ride is really smoother and warmer!
and in the summer or when the degrees minus 5-10 will take off and you will show beauty!
a hammer!
Yes, I also immediately felt the difference, the current is not very good to go to the sink, you have to shoot. And so thanks for the approval
but I am not cold! on the street -36 (the thermometer below -30 refused to show) and on the highway on the way! never cooled down! I really don't have a clutch, only a robot can judge its tightness! ) and the idea is cool, it will definitely not be superfluous! probably tomorrow I'll torture myself the same!
at -30, the factory brake freezes and the oil in the box must be changed to a better one. Factory is not always better proven.
I agree in the Toyota Center they said that the native oil in the box is full "G" but it's expensive to change, and it changes very rarely :)
To hell with beauty with such frosts ...
Although it looks good ...
As I read about frosts in this entry, and in the main entry, I was already stunned ...
for our winters, sasoe IT, Vidon is not flawed ... the heat of the bones does not ache, and the machine is easier in any way with a warm face ... all the rules
Thank you, I helped a lot, I need to stir up this with my own, only I have a slightly different grill (Restayl), the main thing is I understood the essence of the matter)
Added. It is imperative to put more washers on the screws so that the caps do not break through the cardboard, I cut the washers out of plastic. And I had the paralon from the packaging from under the modem, it is very hard, in the photo where it was squeezed with my fingers I had to press very hard to squeeze so
If you can take a photo, I will be very grateful, I just cannot understand how it is holding)
On dense foam (at four points), which is cut in the form of a cone, when it is inserted between the bars, it expands and holds very tightly. and in cold weather it is generally impossible to remove. And it does not scratch the grate. If you need I can upload a photo
I don’t even know, maybe in the auto market, I had it from a 3G billine modem, maybe just take foam plastic from any packaging, I think it will pass
It's me again!)) You can't tell me where you can buy this hard foam rubber, as luck would have it nowhere))))