3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First

VSC which is not, but it is real. - Toyota Corolla, 1.6L, 2008

VSC which is not but it is real  - Toyota Corolla 16L 2008

Hello.
When I put the cruise control in the wiring harness in the steering column, I saw an empty chip. Of the options, it is only possible to install a steering wheel position sensor. In the technical documentation, the shape of the connector for this sensor is indicated exactly as I saw. I began to rummage further and under the driver's seat I found another piece with wires not hooked anywhere. As it turned out, this is an acceleration sensor connector (like a lateral one, but maybe not only). Why am I. And here's what. In Europe, most of the Corolla comes with a stabilization system, even on simple trim levels. It turns out that all the wiring is done in our cars. But there are no missing sensors themselves. Again, the technical documentation indicates that these sensors communicate via the CAN bus. It remains only to buy two missing sensors with mounting and replace the ABS executive unit. I also need a button to disable VSC, wiring for which is also available. That's just the issue price is close to 150 thousand for spare parts.

When I put the radio tape recorder, I found another empty connector near the seat heating switch. It turned out that this is for the switch of the so-called Webasta, which heats the interior on engines with a diesel engine. In general, there are webast modifications, the role of which is to heat the engine not before starting, but during the trip. This is necessary due to the fact that modern diesel engines have high efficiency and they cannot even warm themselves up in the cold, not to mention the interior.

VSC which is not but it is real  - Toyota Corolla 16L 2008 Mileage: 2 900 km
214 Comments
Sort by:
t
twofast 09.12.20

It's great with you! ))) I want teplooooo! ))))

a
alhazzz 09.12.20

minus 33, it's cold here + 7-9)))

t
twofast 09.12.20

Valery, you just amazed me with your knowledge and insight of the question! ) I really wouldn't give up on VSC, really 150,000! It's uh. ... ... ) Expensive!
Interesting information! ) Thanks!

how is the weather in Krasnoyarsk? ? ? We have -33! ! ! Already like a month probably)))

t
twofast 09.12.20

Yes, I have the same bullshit! Frost zadolbal, sorry for the machine!

n
nlera 09.12.20

The weather is hard. On holidays I went to the village. There in the mornings for 40. In the afternoon 33-35. On the highway, the grip freezes. The gear lever is tight.: - ((

D
DARIK102 09.12.20

But we have a heat of +25 + 27 in some places +30))) I don't really envy you))))

k
kandalf 09.12.20

Clearly, thanks a lot for the info!

n
nlera 09.12.20

cloud.mail.ru/public/60b692b7ae63/connector.pdf A51
and A66 are chips on machines with and without vsc, respectively. If they match, then you can try. But this is equal and its weight and size parameters are completely different.

k
kandalf 09.12.20

Well jumpers are bullshit.
It's just why I'm saying, here on the disassembly of the photo of the block RAV4, 1 in 1 like a Corolla. The number is not written, but there may be a chance that it fits.

n
nlera 09.12.20

Probably there is interchangeability. Probably. Regarding the Camry, it is not. 12300 goes only to Corolla. The mount is rather different. I also found out that the connectors are a bit different. Plastic jumpers are different.

k
kandalf 09.12.20

Wo, thanks. Are they in principle interchangeable? That is, I want to find it on my restyling, can anyone?
By the way, maybe they were installed on other Toyota, such as Camry or Rav4, don't you know?

n
nlera 09.12.20

Yeah. Thanks. Here are just 12300 or 12301 depending on the year of manufacture.

k
kandalf 09.12.20

Hey. Could you correct the abs block number? It's unclear, maybe 44050-12300 ?

n
nlera 09.12.20

ABS block with exchange rate stability system 44050-1230 at a price of about 91t.r.
Steering position sensor 89245-12020 at a price of about 7 tr.
Lateral acceleration sensor without mounting plate 89180-12080 at a price of about 32 thousand rubles.
You also need to change the plug of the wires in the ABS unit. There the finns are a bit different (you can cut too much)

s
somebody 09.12.20

Can you write the article?

s
somebody 09.12.20

Thank you, it is really very expensive through exist, I will try to get through my friends how much they cost, you can double-check the correctness of this code "ABS block with exchange rate stability system 44050-1230" - it is unbreakable

k
kandalf 09.12.20

Class. Thanks!

n
nlera 09.12.20

Two parts are a bracket and fasteners, plus bolts. Don't look at ade / nde in the picture, it's a diesel.

k
kandalf 09.12.20

Thank you very much, judging by the diagram, it consists of 2 parts, right?

n
nlera 09.12.20

Found a number. 89189-12091 is an under-seat acceleration sensor bracket. www.japancats.ru/Toyota/P...21-40ee-a810-4602fee0b589

k
kandalf 09.12.20

Man, is there a number plate for the acceleration sensor bracket?

k
kandalf 09.12.20

nlera

I will read it. It's nice that my observation became the impetus for action. Maybe I'll do something. It all comes down to finances. Unsubscribe according to the results.

I completely forgot. Made on the drive.
www.drive2.ru/l/8258174/

k
kandalf 09.12.20

OK.

n
nlera 09.12.20

Excellent. Try to search.

k
kandalf 09.12.20

Thanks! Without your theme, this would not have happened!
It seems that fielders also have this system.

n
nlera 09.12.20

Congratulations! In Krasnoyarsk, it is difficult to deal with left-handed Japanese women. In general, you can think about the installation.

k
kandalf 09.12.20

nlera

I will read it. It's nice that my observation became the impetus for action. Maybe I'll do something. It all comes down to finances. Unsubscribe according to the results.

Unsubscribe for sure! Everything turned out to be about a dozen for me, I took the sensors and the module with the bracket from disassembly, bought a new bracket for the acceleration sensor (it was infected for 34 days). And the wire for the esp off button into the module connector, normally only the plug for the button itself, and the wire does not go into the engine compartment. Oh, and re-pin 3 wires.

k
kandalf 09.12.20

If interested - put it. There's a report in the middle of the page. There is no topic on the drive about cars yet, then we will create it.
tc-club.ru/viewtopic.php?f=11&t=1891&start=160

n
nlera 09.12.20

I will read it. It's nice that my observation became the impetus for action. Maybe I'll do something. It all comes down to finances. Unsubscribe according to the results.

k
kandalf 09.12.20

Thanks!

This person
tc-club.ru/memberlist.php?mode=viewprofile&u=1631

And here is the topic on the corollaforum, which I started with your topic.
tc-club.ru/viewtopic.php?f=11&t=1891

n
nlera 09.12.20

Good luck. Who's first?

k
kandalf 09.12.20

On the one hand, yes, on the other - the day after tomorrow I will change my abs for the purchased one. All other sensors are already installed. I will probably be the second in Russia who put it on the Corolla himself.
I'll try to take a photo.

n
nlera 09.12.20

Interesting, but very expensive, especially in modern conditions.

C
Cobra-42 09.12.20

interesting topic !