Rearrange the dashboard of a Ford Sierra.
Welcome gentlemen!
Not long ago I came across devices with this car. And here were made the order to rearrange. Almost the same procedure I've done (in a personal blog there is a record). But still not quite the same.
The differences in transfer indicator lamps, the separation of rotations and the installation of more delicious toppings. The appearance of new scales remains very liked person this design. By the way I like it also... Nice device this rejuvenates the design =) But, as said difference in the transfer of the warning lights.
Again, I repeat, how does the stock device is Ford Sierra (good if it glow like the photo (!))
Please note where the test lamp factory in only one place.
Knocked out under the instructions of the customer layout and it turned out so.
The final touches and print
Further autopsy. Not a big disappointment brought me a small tachometer is the HS in these devices. So how to put all the stuffing in it ... so you know.
Not a lot of space for filling it, eh? =)
Output — to cut and make cost control tachometer output + extendable contacts.
That's much better! =)
By the way led boards never changed. Just re lit under two channel ignition with the regime of day / night, that will also be hidden near the tachometer.
Now what is most raisins the alteration of the transfer / separation of some of the warning lights on the gauge tachometer + icons turns (tachometer and speedometer). Was manufactured by the conventional wells (taken ordinary syringe and pulled a black opaque film) and drilled holes in the fibers in the required areas.
Oh, I forgot to mention about removing the old adhesive from the fibers after the dismantling of the factory scales — it was something! =)
The difference is obvious, isn't it? =)
Well, after the build, daily test and correct deficiencies. After you get a picture.
Check for new / transferred indicator lamps
And the General appearance of the updated device
Tomorrow the device goes to the owner for installation. Report after the installation is here on the website by the owner — will definitely share with You how it all looks on the car.
With HC,
Paul
Our page on DRIVE2:
LEDSTREAM instrument Panel, salons from LEDSTREAM! 3 proven review Watch prices, photos and contactsLEDSTREAM
The old in the trash. Is the seal of the new scale by the customer.
And now the us was clear)
Scoring in General it's very modern.
No, none of the individual connector was not provided. All wiring for the "bun" was withdrawn for further installation man mediocre is not already on the car. The owner of the devices auto-electric — on this did everything at his request — problems with the connection, he will not certainly. =)
And all the extra buns the conclusion was to separate the connector? On what type of connectors do? Can share a photo of the back of the panel?
I'm not annoying, I'm really interested)
Then the question after indicators turn signals also blink together? Or separately, with the separation of left/right?
It is quite implemented and so, even if You're right. Just divide the on-Board LEDs and display extra 2 wires. Problem is not even the owner of the devices.
I do not know. Have you thought to share the same functionality? If I remember correctly, the connector on one contact on the bulb both wires coming from the handbrake and brake fluid reservoir. That is just enough to split the chain... there wasn't an offer to the customer to do even better?)
The manufacturer of the plant this bulb sensor low brake fluid level and the trailer hand brake lever. If they light up simultaneously, the logic "and"- what is the point of separation?
I repeat — the same, and some were made by the manufacturer. h-a.d-cd.net/1b8fe28s-960.jpg
I just divided one test lamp with two icons on the two — light they will at the same time.
Absolute repetition of the functionality of the factory bulb, just separated icons into separate warning lamp.
Do not quite understand the functionality of the extra light bulbs... Especially with regards to brakes.
nice, fresh, pointless :-) performed very well.
question: I have on the panel there is free space in size where it 2х2см (ATO 2x3 and if you remove the bulb size) and 2cm in depth, here's the photo shows, under the charge lamp:
e-a.d-cd.net/3ae7fcs-960.jpg
is it possible there insert some sort of screen that showed the clock and the outdoor temperature?
I mean not only peresveta and comprehensive work on the interior. I have a classmate Glory Pochenkov Togliatti began in 2004. Now, the freight division of the Volvo running. Devices on the new Kalina-sport its thumbnail by the way.
I meant green illumination) Yes, I and Lexus peresvyet on easily, VAZ — funny, my eyes closed. The hill I need for sure, believe me)
LEDSTREAM
Why so modest, Vladimir? I would be in the Skoda lot of things replaced, like the greens, it does to anything in the salon =P
Hmm...the instrument suits me completely. But the rest...I think. Why modest? Miserable VAZ devices long ago in the trash time to throw. I think Your ability there as possible. And then with experience and over the hill)
Why so modest, Vladimir? I would be in the Skoda lot of things replaced, like the greens, it does to anything in the salon =P
I do not know how better get Sierra after such outsizing, but the look was cool! Dear, you have to AvtoVAZ in the Department of interior fitting.
Bambeano done!I'm Scorpio too, would Preobrazhenka bring me...only blue light rushing!)))
No matter how will go car after these changes, most importantly the owner is always in a positive mood from the beautiful outsizing!
Great!
Yes, there is a lot to discover in principle, everything depends on your imagination =)
LEDSTREAM
What do you mean he didn't? :O
well, when сиерру2.0 changed gave her the present master in DND
Paul and Scorpio transition is possible to make? I would have ordered for her. But I have Kossi and tidy is different from the usual!
Thank you. Resistance and so worth it already. Or to put above the value of resistance or to replace the led's on the smaller size.
in the Sierras, not all that bad — the lighting inside and lighting the arrows. Her brother Passat idol which direct illumination as in the Lada. but it is.
You have turned out luxurious. Now a stupid question — at its Almere rewired dull yellow diodes on a white — came out a bit garish (to say the least). Is it possible for food to put rezyuk and what?
Well here it is not just a replacement of the scales and installation Svetikov, and work...
Nicely done! My first car was a coupe...pleasing rear-wheel drive... to always remember
Backlight — Yes! Scale in principle, change is not always necessary. But improvements in terms of the transfer of the warning lights — this is an individual matter =)
Thank you! The analogue of this device only one. And that so is not installed on the car =)
How do you see a similar tuning, so many times, convinced that the factory designers
no wonder we eat the bread. :)
Super. Full year 2009 travel on the Sierras. Tidy were generally satisfied with the readability and convenience. This is the tach worked, no. You have turned out very nice and hopefully reliable.
Anything can happen =) This device too, can someone not like a particular moment =)
Well, about "Race" and similar labels — each case personally. To each his own =)
I have a lot of customers sculpted in the layout of future scales awkward inscriptions in strange colours, but do not forget that he was the client — he's right! =)
just a bunch of times ran across a rework of the dashboard, the result is simply uzhoss... a bunch of starbursts, rycerskie habits, and so forth... and then, the backlight is just perfect and so all works)
Understood, thank you) out on the course level! Class!
Can you tell me: tidy works Van bus, it can be the indications of the tachometer and speedometer shift? That would be cool not to 7thousand revs and up to 8, and similarly with the speedometer, from 210 to 250km readings to shift. This IOS tidy is solved? Or resoldering the motors? For earlier thanks)
Credit!
Tell me how much it will cost to print the scale on the plastic, if you send print-ready files in Corele?
I will not answer. All questions on prices and other details are discussed only in BOS.
No one was "busted" and your job does not put into question.
But tastes and sense of style — and to hell with it, generally not a topic of conversation.
To each his own and do not all fit your tastes raking. Nothing personal, but I can about Colt to ask — is it people like? Nothing extra in this version I don't see everything perfectly and harmoniously. Open the blog and look carefully, I think works without the "stuff" you will find.