Change interior lights Opel Corsa
All kind time of day. Today Peresvet got Opel Corsa with its yellow light. Unfortunately the photo UP there, so photos took from the Internet.
The first thing took over the bar. All of the standard.any pitfalls.The arrows were removed with a fork.as we sit very tightly.just hand counter-clockwise and they have not given.
BUT only. the backlight BK used the 3528 LEDs with 4 terminals. and the site is made so that 3 contacts were in the red.and one plus, so from the side plus one contact minus.who would have liaised with advantage when soldering. Ripped contact the track and you're done.
Then proceed to the buttons and the light unit. The block lights are 0805.I replaced 1206,cleaning the contacts for soldering.
In the block of the stove are lamps, as in the information display.they do not have time. Will finish soon)
And that's what we have! The result is in your court!
Sincerely, LEDstyle!
sanshesss
Well drugan)) Vanek on the 7th sky from happiness))
Vanek only on the second day from shock otoshol))))) and was able to appreciate the beauty!
Thank you so much, I of course was very worried, but the result is beyond praise. Waiting for the completion of the project! All super.
Momentary
mileage at the same time overpowered?
mileage to twist if you remove the mascara it is not necessary)
I wrote that the photo is not mine, so as To not have time to take a picture, only After
But I would be here, on the contrary, white in a yellow remake... =))) this is exactly the taste and color =))
Nils116
if the plant produced white backlighting, the craftsmen immediately called her tasteless and altered in any other (for example yellow) 100% fact
and that's the thought wanders in my head! )))
if the plant produced white backlighting, the craftsmen immediately called her tasteless and altered in any other (for example yellow) 100% fact
Artepin
Fine began. Yellow looks awful in my life, my sister of Corse this.
Yes, normally it looks
radio there is not native with RGB backlight. and the power of the stove, and a Bulletin Board soon so as peresveta
Denistsuprov
Have shooter diodes, too, must change, even if you are satisfied with red. The old brightness LEDs background of the new lack and it shows in the photo. And yet, if the odometer window to put red LEDs instead of white, it will be a beautiful red screen, like BMW, not blue and white like yours, which is at all out of place.
In the photo the exposure is so chosen, therefore, talawila a little red. In reality, all the rules. As for the red display and I talked to the owner of the car, but as this saw said to keep it that way
Have shooter diodes, too, must change, even if you are satisfied with red. The old brightness LEDs background of the new lack and it shows in the photo. And yet, if the odometer window to put red LEDs instead of white, it will be a beautiful red screen, like BMW, not blue and white like yours, which is at all out of place.
feelnvnet
Can you describe more about how the arrows were removed, and then the other Subaru's on the Fox wanted peresvyet tidy, and all rose because we could not remove the arrow, pulled up, nick's not going to turn against the clock did not dare, then suddenly go and all will cease to work ((( and fork as ? just under them is the plug and pushing the plug to pull off ?
I have mine in BJ there is a video on peresveta Ford
Under the plug, put some nito piece of paper, feed it through under the arrow and pull on it lightly .but we may have a little to apply force
Can you describe more about how the arrows were removed, and then the other Subaru's on the Fox wanted peresvyet tidy, and all rose because we could not remove the arrow, pulled up, nick's not going to turn against the clock did not dare, then suddenly go and all will cease to work ((( and fork as ? just under them is the plug and pushing the plug to pull off ?
I don't remember the little things such forty pieces on the face dvuhgorbogo stereo
yeah, I'm a medical patch pasted, but the desired color was not achieved )
and just like need to choose, right?
and you try resistance to change.a little more put.and(or) stick on svetice film white matte(ORACAL preferably) it will give plus a little yellow(which will soften the saturation of the green
Looking good
Tell me, maybe picking up someone, which led to take to percutit regular stereo RCD310 from a VW(red) in colour Skoda (green)
I slightly got, I got a more intense color, reaccurance
Oh, I remember I had a machine with such tinting, at first everything was fine, then started to irritate. people were changed to white and blue and obviously interesting and enjoyable
Looks fun staff. It's the first time the same, only seems to be Vectra. Pliz the price issue voiced in the PM. I in General that with his price tag was determined, moreover, that this training will be the discount to arrange a regular customer. But I wonder to what extent the master takes. :)
Unfortunately I do not know. There are community led and tuning Led lighting in forum ask a question
Of course, the work done is enormous. And very difficult...
But, IMHO, of course, regular lighting even as it looks interesting...
UPokrishkoy
I have my own markers. In all modern cars — white - blue-green backlight, IRS. Yellow looked interesting, though it is a plant.
I agree!
And not only in zoelah yellow in backplane present. For example nissanov it just as often.
I have my own markers. In all modern cars — white - blue-green backlight, IRS. Yellow looked interesting, though it is a plant.
Do you like the first photo? Front panel(cladding ) latches. It needs to be removed.pulling and prizing the latch contour
Good afternoon, tell me please, why not preserve the intensity of the backlighting after the ignition is turned off. Removed the battery.
Can you tell how the emphasis is to remove the green filter on the PCB? And then all brain already to itself broke.
Where some can't remember exactly. Used 1206 and 3528. On the Opel club is full of old
Good day, please tell me the numbers of the LEDs, where to put what. Thanks in advance.