Bluetooth adapter settings for LPG. Part 1 — Making Of
Looked at the implementation of Bluetooth adapters users on the drive. Also wanted something similar to collect.
Hunting small, so compact and convenient.
Figured as it is more convenient to place the module over the connector, so nothing was sticking in excess.
In the end, more than 6 variants of the seals drew.
1) Option # 1. The module along the slot. Unilateral signet, but had to do the jumper on the back side of the Board.
In this embodiment, a connection indication is not true was chosen (24 feet).
2) Option No. 2. A similar location. Unlike the first, indication not output 24, and 32.
3) Option # 3. The difference from the previous is the use of the diode bridge MB6S. What is the reason, and the fact that the connectors STAG (digitronic), power pins (+12V and negative) located in the inverse block AMP Superseal 1.5 in relation to the connectors LPG Zenith.
4) Option # 4. A different arrangement, with a diode bridge and a display.
5) Option # 5. With Converter 3.3 V — 5V.
6) Option # 6. Similar to the previous, with slightly different wiring.
In General a lot of options, I wanted to try.
That's good information connectors SuperSeal 1.5 — instructions for use
The scheme is simple. Voltagestorm to 5V used, because the 3.3 was not available yet.
To indicate the availability of food is a led to +5V.
For indication of communication with the module 32 output module HC-05 is derived led.
Well, the diode bridge at the input is disconnected from reverse polarity.
I wanted to try to make friends "digitronic Maxi for" software for plansee on Android. <>StagMobile
As here:
www.drive2.ru/l/7236270/
www.drive2.ru/c/2165835/
As already understood, tried with a level Converter to connect the tablet, a negative result.
Scheme for experiments with Converter of logic levels was so.
In the end polucilasi fee simple without any logic converters. 78L05 replace later on 78L033
The adapter with my unit Digitrinic for MAXI in the environment Win7 connects. Once the connection is established the status led
CONNECT begins to Shine constantly. As soon as I disconnected the connection, respectively, then the led goes out.
Appearance were as follows
The view from the opposite side. Beyond the connector failed.
For clarity, the photo with flash
Use transparent heat shrink, 16mm and 20mm.
With this case 20mm shrink not nalazila really, if someone will buy, looking at 25-30mm.
But I got out of the situation, and stretched it with pliers to the desired size and it came very close )))
Conclusions:
1) With the factory adapter bare HC-05 is intended to supply 3.3 V. But it turns out that the unit from 5V directly while also working...
In the future it will be necessary still to alter the power on 3.3 V
2) Chinese module HC-05 did not have to configure via at commands. From the factory the speed to 9600 and the connection without problems
is the module under Windows.
3) signet with a Converter 3.3 V — 5V it will be necessary still to alter the mind.
Bluetooth modules HT-6630. mini-review — comparison
Because the laptop I have has no built-in Bluetooth module, so it is necessary to get.
In local stores the price of the modules in the order of 250-350R. Expensive, wait we can — so we order from Ali.
the price is much cheaper.
It's two apparently different module.
Case look different. More compact on the left, to the right a bit podlinshe.
Understands it's very simple, just use your fingernail to pry. With the module on the right is a bit more complicated.
I was surprised that the entire Board is hidden inside the USB connector. Who soldered standard USB connectors — I need to understand.
Internally the modules are identical, both on the same chip HT6630. It turns out the producers only of the case in such modules
doing different. I liked the one on the left.
Here is a photo from both sides. BM20-v CW6630.1.0
So I don't know how to understand. The box says that the Bluetooth 2.0, the signet that 1.0
Maybe it's just a version of the seals?
Well as external looks. Visually of course sticks out a little far, but it's only 1mm relative to each other.
Ask why write all this?
"well, of course, to boast, and what else ..."
maybe someone will be interested ))
I forgot. The radius of the line of sight of course much more.
I did it that way. Connector installed in the cabin, near the front passenger footwell, under the shelf.
Went with a laptop from the car and watched the range. Got about 2m from the hood.
Ie about 3 meters from the adapter.
good luck to everyone )
himiks
Thank You, Alex )
it seems to work, but I think to reduce the voltage still to 3.3 V
don't know how long I can work on the adapter powered under 5V
atiker safest fit?
himiks
Thank You, Alex )
it seems to work, but I think to reduce the voltage still to 3.3 V
don't know how long I can work on the adapter powered under 5V
And there is on-Board Bluetooth adapter isn't there a stabilizer on your 3.3 V ?
At the same time check how long it'll last, and the next will do even better and less.
Thank You, Alex )
it seems to work, but I think to reduce the voltage still to 3.3 V
don't know how long I can work on the adapter powered under 5V
himiks
in the pursuit of miniaturization?
not that we don't remember that )
Yes, just look how it was before all clumsy, from the word axe
like when on the Board nicely
Here here.Stumbled upon your palce two years ago, the cinder block associated fittings.Just HORROR.
Not looking for someone is not necessary.
Small is not always convenient and practical-for example near connector will be a small fee if not convenient.
And about axe-if you take less then careful work.
in the pursuit of miniaturization?
not that we don't remember that )
Yes, just look how it was before all clumsy, from the word axe
like when on the Board nicely
Smaller and narrower and thinner.
Somewhere it has been a couple of years ago.
The main thing that is very liked and was healthy.
Beauty will save the world.
Yes, the Cp2102 will fit perfectly )
the same UART as the ft232
its main solder
or Chinese ready-made module in a test?
they all want your gasmask to inspect, holding back just a nuance of tolerance ср2102 to 5V level. there's also a 5V UART ?
Here are all ЛМ317
www.danomsk.ru/component/...shop&view=search&Itemid=0
in different buildings. Select current smaller, say in the case SO-8 11R, the current it is designed to 0.1 )))
or to-92
For lupupa this is enough
But better without ЛМ317, so that the resistors don't count.
Take for example this
www.danomsk.ru/shop/2-mik...3265-l78l33acutr-sot89-st
there should be the input and output capacitor (ceramic Yes, the electrolyte and all)
you can try.
I will change the 78L05 in the case сот89 on 78L033ABUTR in the same housing (in Dan he rubles 15)
and лм317 with resistors can be configured for any voltage. there are calculators лм317, there is only complete data
if 1117 3.3 v
Yes, I have the Bluetooth of the laptop is ripped)))) found + — rx tx) and collect, food microhei lm*** (don't remember... 3.3 v) is lowered, it can work)))) if not, go your way)))
stain, i.e., impregnation is applied to the test, i.e. trained on the shelf
at home I have a few hanging shelves made, I'll take them off, starve and Lucite. Lacity only home
And in the garage yeah, screw nail, and so will descend
well, I just can't break all things
have the mood to choose
here's a shelf built in the garage from plywood 12mm, bunk
today, coated, impregnated spray gun to color.
tomorrow will be Polish )
stains no store where purchased, had impregnation to take.
gently walked, slightly
it is written that dry day. So tomorrow Lac
well done !
now have a wireless gas pedal to master )
cable doesn't count ! do not Unscrew )
thank you )
enough and such
here and August it's rainy
I heard .
bomb experts used Wi-Fi channel, but the router have spent dlinnyimi include using an extension cord from the post operator ))))
Sit 2 addict in the movie, the film starts ...
— Hey, do you know how are they so light extinguish ?
— No ...
And this is because they mmmeeeeeee the plug pulled .
these things are wireless and never will be. even explosives and insure those wires
well done !
now have a wireless gas pedal to master )
cable doesn't count ! do not Unscrew )
himiks
what getmsg?
the plug is the same as in the record, plan or other?
On eBay saw another similar adapters but vayfay.
himiks
what getmsg?
the plug is the same as in the record, plan or other?
LPG Lovato, plug takoyzhe.
The same figovenko is already almost half a year.
no matter how banal zvuci but I can't find a good plug for connection to LPG.
The difference with mine, you have only Bluetooth I have with Board Rx Tx.
If any final version of the universal adapter is ready, would announce the price in PM. I would like the wireless adapter for diagnostics/setting LPG BRC Plug&drive and WOOS of Microlut. I understand that there is just and right would switch.
the idea is good, we need to think how to organize worth the small price, so compact was
Great stuff! Only need to add a switch Tx-Rx \ Rx -Tx, some of the gas minds they changed. And to the masses! I think a gasman will want!
thank you
great, what happened ))
and then some comes out on the modules HC-06 is probably just doing it wrong
gathered such that 2, yourself and other. LPG DIGITRONIC 3D POWER, bought on aliexpress Bluetooth HC-06, bought Krenke, power taken from the fuel pump of VAZ, and collected according to the scheme which many in the net and radius, but the main thing here MYSELF! and it's good! Well done
here is the link — highlanderclub.ru/node/12966 but there are signs, permanently you need to change the relay that VAZ is talking about it! just possible of foreign supply, but will be the same. It's simple and easy!
Can I ask, and it is possible to assemble such an emulator FLE-P for LPG, it is assigned for use in the car, in which there is a problem with disappearing fuel when operating on gas, namely go to gas (for example, as I have a Lexus RX300) and arrow tank falls to the level of blank (mileage involved with the consumption and so hand runs down) and then returned for an early discharge, you must simply discard, if required and all will return, but it's every time do not want to. There are homemade, but better of course something good!
.
name
AMP Superseal 1.5 to 4 contacts
ru.aliexpress.com/premium...003214&isViewCP=y&catId=0
where such a connector to buy in from what? saw this on the housing of the fuel pump, but it is a glove there
MegoMatiz
Turned out fine and compact, it is a pity that have not yet mastered the technology of printing circuit boards.
LOOT taxis)))
Turned out fine and compact, it is a pity that have not yet mastered the technology of printing circuit boards.
that's also interesting, as he will live.
And for the other I have yet taken L78L33ACUTR in the body the same
the Chinese sell ready-made modules (Bluetooth is installed on the Board with a power circuit)
and the price of such a module is not different from the bare Bluetooth.
however the voltage regulator, if memory serves, is powered up to 7 volts.
the experience of predecessors on the 5 volt power module works better---more stable connection.
how it lives at the same time---the question.
it's a fad to connect to the brain, and LPG, which have a connector like the picture
currently not available connectors
there in the vast well-known website a cheap wifi modules, at the time I also shoved almost all their devices, the principle is the same team at dimensions are the same as those of the teeth, wafer in the laptop built-in and range more!
used only HC-05, 06 were not working.
Yes, there the difference is small
everything is how to configure in which case
www.poprobot.ru/home/bluetooth-hc05-hc06-setup
All the cards are in hand )
only me bare module HC-06, it's all go with ready-made conclusions.
specially certainly not looking for...
Wanted Wi-Fi or Fresca but will have to do bluuu -though the nubuck, at least on the droid.
Bookmarks.
Printusage the file is not preserved under module Bluetooth 05того ? After tomorrow it should cost to do
IronMan89
and stage really the IOS device to connect?
Yes . I have a plow . however I'm slightly different adaptercable.
then if you count only the components is not enough out, and painstaking work to create the Board — that still occupation
how will the ability to solder — prompt
hi
you have to check ready available anymore. in General, for all digitronic (Stagg)
good, only for his unit soft see appropriate.
their works in the form of the ready device in rubles-Yaroslavl appreciate.
but now is no time to collect
who thinks that's expensive, let them try to collect themselves
Interesting crafts. Soon I will put LPG, so I would like to know about purchasing. HBO EUROPAGES. Work?
When it is in the hands of the documentation and the connector that I think will be easier. There must be something special. When I give it all, give it a try?
Please tell me that is not signed for the items, well the one near the LEDs, as I understand it the resistor\I would like to clarify the denomination\, and the second near the diode bridge?Well, if You don't mind working circuit of the adapter.And then provided two experimental Converter with and without it.And I understand through their connection could not be established.
Thank you so much, happy Easter and holiday, 1 may, and of course the 9th of may\a holiday of our ancestors\.Thanks again and good luck in all businesses started.
Lyah69
A working version of the layout Board on which I have asked? Right?And then went through many options to connect to Maxi 2,but all the options were not successful.And I had to buy a cable.
dropmefiles.com/0no1Y