Pioneer 5700 and console, and after carbon - Toyota Corolla, 1.6 liter, 2008
I recently bought a Pioneer 5700 tape recorder, but the hole in the console remained for two din. I didn't buy a frame, I decided to remake the old one. At the bazaar I bought a box for a hole (from a ten-piece panel) and began to sculpt "Buratino". The glass fit very well, and below I began to solder the frame from my mayfun. An hour later, everything was soldered into place. it remained only to putty and paint, but not everything is as simple as it seems. For this I had to select paint, but there is no such paint in the market and I went from the opposite. Took off the whole middle console to hell. since there is no paint, then everything will be BLACK GLOSS. As expected, all the elements were sanded and painted. I fiddled with the frame a little more. At the end of my adventure, the console turned out to be very good. Well, then see for yourself.
Price tag: 1 400 ₽
there is a carbon film of all colors right now, so painting is not an option, especially the gloss, dust will be erased once and the scratches will glare, there is matte black, it stretches well and does not scratch, I covered it under carbon, now my native mayfun does not look like a native
in reality, this film is any scratched, but no one can cover the podiums with a film, I soldered the frame from the mafon! Everyone understands that this is a film, and even now everyone molds it anywhere.
Nefig is not visible, but carbon drives) And why is it scratched, do you have a textured one or not? Texture 3M only if purposefully you want to scratch.