Auto Shumka (part two) - Toyota Corolla, 1.6 liter, 2005
SHUUMKA SHELVES
Cut holes for more tangible and better bass
Noise the shelf with Vibroplast M2 STP
I also left the factory Shumka, this is the sandwich
Final result
TRUNK LID NOISE
And finally, the trunk lid is rolled up with Vibroplast
TOTAL
On all doors, arches, trunk, shelf, trunk lid and front panel, material has gone:
Vibroplast M2 STP - 11 pcs.
Bimast Bomb STP (4mm) - 2 pcs.
Spline STP (4mm) - 3 pcs.
Bitoplast 5 A1 (1m x 2m) - 1 pc.
Madeleine - ...
Degreaser ANTISIL 1 l
Roller assembly 20 mm
This is a dreary job, I know not by hearsay. Five for the set. By the way, there is a question ...
Well you can still make out the trunk) Good approach! It is not at all pleasant to drive with a disassembled cabin, I know from myself)))
I'm getting ready to install a 1din receiver instead of a standard 1din receiver. Bought Facia 2 din (in the future may put din and 2, as long as the hole in the floor cover, frame cost only 350r, and 1din 1300)
How to connect the receiver to a standard wiring? They offered at the car market to buy an adapter for 500r, they say, one end is to the Toyota output to the radio tape recorder, and the other end is already a euro connector to a new receiver.
It seems like in this case you cut less wires, or do not cut at all, stretch the line rulers to the linkers and the wire for turning on the amplifiers.
So is an adapter needed?
Tell me how I removed the rack overlay. On which I hung a squeaker.
I tried to take it off, it's dumb, there is a side cushion curtain under it.
The upper piston moved away, slightly bent the pad, in the middle, too, the piston shot off. But in the middle the piston is interesting, it is also with a plastic connector (darling), at the piston, daddy's mom are connected by a 4-5cm darling. As I understand it, when the pillow fires, the upper piston will come off, the central one too, but the pad will not fall off entirely, the central sweetheart will hold. I still don't understand how to remove it. Did you shoot her?
This darling is the only thing that keeps the pad with me.
To lead the wire to the buzzer, did you have to puncture the pad?
I understand that you cut the shelf so that you can feel the sound pressure better? did not put pancakes?