Controller led DRL, version 2.1

That's why I love your scheme.so it is that they are the size of flasks

And can price tag in a PM?)

Johan bogeyman, ETOGES how tinyscope soldering is needed?

Wow! That's the job! And the price?

Also the price tag is interesting

I'm on vacation

is in stock?

Pavlovich, I'm still on the second. the version in the queue and then 2,1)))

the size is impressive )

great talent

How much is it?))

And how can you purchase such a device?

Vano-minsk

To order. And then people said hang DRL — they had hung up, and to tell that they should turn off when you turn on the dimensions — is not told, at the end of the night a bunch of assholes with lights goes blind because hang of DRL on the dimensions that is fundamentally wrong.

Really just takes the installation manual and everything is done as it shows. If, in fact, such rules — disable DRL with dimensions will come by itself. If not, then DRL+dimensions not a crime.
And again, still do not understand why such a high: riding with some dimensions of the night is by definition a sign of a asshole, ne? And it's better to let it Shine DRL than not see him in the rearview mirror while maneuvering. Well, the day does not matter on size or not.

Vano-minsk

The UNECE regulation in force including in the CIS, reglementary the installation of DRL.
In particular the points:

Appendix No. 5 Requirements of the issued individual vehicles

1.3.29. Requirements for daytime running lights:
1.3.29.1. Daytime running lights, if fitted, shall be switched on automatically when the ignition switch is in a position which does not exclude the possibility of the operation of the engine. Daytime running lamps shall be switched off automatically when the headlamps, with the exception of those cases when the flashing of headlights is used for the supply of short-term warning lights.

And right DRL (not these lampochki of the button illumination mobile for 300-400 rubles on the market) will be significantly brighter beam, they have a luminous flux is very strong, otherwise they is no point at all.

Why, then, most of the "native" DRL does not turn off, and only abate?
The UN is engaged in regulation of traffic? Weird.

"The daytime running lamps shall be switched off automatically when the headlamps" — the inclusion of the dimensions considered? It is not clear.
"And the right DRL (not these lampochki of the button illumination mobile for 300-400 rubles on the market) will be significantly brighter beam" — how many saw the DRL, as a staff of Abduh and beh and others, and of custom — has never shone stronger than the headlights.

UdavKaa

I have looked through the standard, but have not seen a clear indication that the DRL cannot be used with envelopes.
In addition, DRL it is clearly less bright than dim light, and at night in the dark, no one will ride with them.

The UNECE regulation in force including in the CIS, reglementary the installation of DRL.
In particular the points:

Appendix No. 5 Requirements of the issued individual vehicles

1.3.29. Requirements for daytime running lights:
1.3.29.1. Daytime running lights, if fitted, shall be switched on automatically when the ignition switch is in a position which does not exclude the possibility of the operation of the engine. Daytime running lamps shall be switched off automatically when the headlamps, with the exception of those cases when the flashing of headlights is used for the supply of short-term warning lights.

And right DRL (not these lampochki of the button illumination mobile for 300-400 rubles on the market) will be significantly brighter beam, they have a luminous flux is very strong, otherwise they is no point at all.

At a distance of couple of meters and the more matter it has no special

Middle at an angle to the ground is shining, so blinding .

I have looked through the standard, but have not seen a clear indication that the DRL cannot be used with envelopes.
In addition, DRL it is clearly less bright than dim light, and at night in the dark, no one will ride with them.

To order. And then people said hang DRL — they had hung up, and to tell that they should turn off when you turn on the dimensions — is not told, at the end of the night a bunch of assholes with lights goes blind because hang of DRL on the dimensions that is fundamentally wrong.

And why is it needed?

Yes, didn't I size. Although they did in the CMD0402 and type this www.drive2.ru/c/1048514 but five of them are already uncomfortable. Although you can do seals with a resolution of 0.1 mm, but they are difficult to solder, the parts stick together when soldering, etc.

When the resistor values are read with the naked eye - this is not the limit... :)

price in PM pliz !

Yes, it is cheaper and easier

And not the cheaper on the two relays to set up the circuit? And it will be easier.

Thanks, I'll try to collect

Nice blog, subscribe.

RA1CAG

The whole essence of Russian mentality. Until you understand why you must follow the rules and standards — you'll stay what is called "Russian cattle".
This is a culture of operation, this is a culture of communication.

even nothing to add. Respekt :)

OK, bro, BB))

It does not matter, boyish pass. And perhaps with time will come understanding.
Remember — GOST's, OST's, etc. do not write the most stupid people.
And their lack of understanding — each case personally, they are not created for this.

if you do not understand something always following it?
the answer you already know...and you can not deny this, , ,
here I am not going to follow what I don't like, and if people are going to drive, and will not work and will not explain — this is exactly the trash!
so another time think before you write something))good luck, BB...

There is nothing to read, it is well-established expression.
With GOST-s in constant contact. And now the main thing — if you are a guest do not understand, just follow him.

read the explanation to this word, and list several reasons to call me that.)).
the culture of exploitation? ahahaha, you didn't see me behind the wheel and you can't judge me as I drive and what rules...
here, you think about some rules and Standards came up with just what would the money to cut down more, but from themselves, they represent nothing...
p.s. if you kapanui on the road — come under the following case and explain to the person what he did wrong.

The whole essence of Russian mentality. Until you understand why you must follow the rules and standards — you'll stay what is called "Russian cattle".
This is a culture of operation, this is a culture of communication.

Yes, I'll say that, nor illegal, neither of which is blinding in there...and the standards let garbage watch...
it's everyone's business to do so or not, isn't it?
just a man nothing to do, that's all)))

GOST R 41.48-2004

and do not think that the answer is hidden in the title?
DRL — daytime RUNNING lights...
dimensions — light bulbs for visibility of DIMENSIONS and\m
and why when you turn the middle frame does not turn off and the DRL should?

possible conditions and the cost of acquisition?

How much is the cost of this device, if it is possible in BOS

No. Not the kind of power

Is it possible to connect regular lamps near/far accounts for 30-50% of the power?

you price in PM, please? )

and what's the problem? custom now there is no taxes, most importantly the price and the cost of sending, I'm from Ukraine and ordered everything returned.Just Napoca to know how much it will cost to send, and add to the cost

Unfortunately only send to Russia.

You can order and the cost with shipment to Kazakhstan?

no, the stub will not do

if not hard, can request a modified version with an integrated stub to leave? for DRL it will be fire

You can connect of course

a stabilizer does not tie it to the exit? to above 12.0 Volts were

Yes.

Judging by your circuit, the led drivers are not in the scheme, i.e. it takes the stupid side voltage minus the drop on the fieldwork, but it (the fall) is not great. Right?

Thanks, Put in Sinaproc check.

It's the fuses. The clock frequency is below

Repeated Your circuit, all modes work, but the time of ignition and the damping increased by 5 seconds, i.e. instead of 1 sec — 5 sec instead of 2sec for 6 seconds, etc. what to look For what the error might be ?

good day I want to repeat your scheme.is it possible to connect to the turn signal?

Good afternoon. want to take Your controller for one reason: whatever during warmup the factory DRL were not shining in the neighbors window, translated automatic transmission with Parking in a different position — they were on fire. I read like all the links, but not understand where is mounted the controller in this case. it is possible for more and money?

thank you

ru.aliexpress.com/item/Fr...phone-MP3/1830709012.html

my respects, as I can not find buttons of the same size on aliexpress, we can help link?

Hello! You can ask for the cost and shipping of the device?

soldered, flashed, checked with DC-DC on MT3608 by 18.75 In and 2х600мА works. The smoothness of the decay and kindling a little hurt, on low brightness, very visible PWM (the inverter starts to crack a little), but everything works, I will put into the spotlight. Thanks for your work! =)

Yeah, probably will affect the smoothness

That is, the dc-dc to put between the output of your device and DRL? Brightness control and the effect of ignition/fade is implemented using PWM, it can affect the operation of the voltage Converter and the operation of the lights as a whole?

if you connect the DC-DC

Welcome! Tell me, can this device to control DRLs, powered by a 20 volt. And how better to connect the dc-dc stepUP Converter in this case? Between the ignition switch input +IG (come here +20вольт)?

Welcome.
Always follow your DIY.
Now choose one to apply to themselves. Specifically this.
Only way to fit their realities to fit can't. I have a DRL is inside tomance instead of a lamp thereof.
Accordingly, I want DRL lights, when the car is started and automatic transmission removed from a "P". And that, as expected, turn off when you turn on the dimensions.
BUT, I would like that when pressing the power button on the fog lamp, they also included, even if the burn size. I can not use the options of your modes for your requirements...just relay to hang on the gap signal ILL

PS As to buy a couple of boards DRL 2.1?

I think to implement the 5th mode. After switching on the ignition, nothing is burning, after starting of the motor, the oil sensor will squander IN2 to zero and the DRLs will light up.
I understand, plus on the whole scheme should be submitted separately from the ignition? Otherwise, if I choke the engine(turn off ignition) the algorithm is useless, since I will remove the power from the circuit.

Here's how to combine Your device with the circuit posted here toyoinfo.ru/news/1/2010-12-20-435 but with the inclusion of D and fuel pump ?

In theory Yes

And it is possible on this device just signal DRL file for relay to relay PTF was included when the enable-IN1 signal (+) "D" automatic transmission and the signal IN2(+) fuel pump (signal appears only with the engine running)?
Just wanted to let PTF be included separately from all other light bulbs with the engine running and only in motion. When enabled, the dimensions of the PTF needs to have a regular feature be activated/deactivated from the regular switch.

Question, and the fact that the concept of resistance is 10K (01S) and on the PCB 2К2 (222) this idea is meaningless ? :)))