Replacement of acoustics! - Toyota Ipsum, 2.0L, 1999

Since the standard speakers are 13th, we will put 15th.
So we remove the sheathing from the doors.

Now we remove the vacuum film


Now we remove the standard speakers, use a drill to drill out 3 aluminum rivets.

Now we glue the entire interior of the door with anti-vibration sheets.

Now we paste over with noise insulation

We unsolder the acoustic plug from the standard speakers and solder it to the new ones.

With the new kalonki, the set includes seat templates. Using these templates, we cut out spacers from plywood 10-15mm

Before installing the spacers, grind off one edge of the mount.

Now we install the spacer.

We put the column.

On the edge we glue the foam rubber (the one that is on one side with an adhesive layer.

In order for the sound not to be lost, I drilled additional holes in the sheathing.

The doors are ready now we pull the wires from the head to the amplifier. We put the reinforcement under the passenger seat.




This native head only plays the radio and sd

Price tag: 8 000 ₽